Hello, I wanna unlock an iPhone 5c, currently locked to T-Mobile. How's would it go?

Please help me with ROM for the Bryte One tab. Thanks

How much is it going for?

sunnedee2:

Hello,
was it at night that you got that usage time or during the day when the solar panel is providing juice?
Your response will determine if I will get this or not

It doesn't matter. The only difference between day and night is that there's a chance for the battery to still recharge the battery and that could only be when you're not using it (especially the converter), which discharges the battery. When it is discharging, it can't charge. But once you exhaust the battery in the night, depending on the consumption, you'll have to wait till the following day, sunset precisely, to start charging it all over again.
I've found out that it can power both the TV and decoder for like 8 hrs, but my QASA standing fan lasts only 4 hours

REDDEVILS1:
I suppose it can't run fans, four 41" TVs and a freezer

Haba! You wan kill donkey nei?

Here's the converter

DjAndroid:
please can you post a picture of the device let see what it looks like.

This's how it looks like. The package comes along with a solar panel, an indoor unit, which is what I pictured here, 2 light bulbs, 2 USB cables and 1 DC to AC converter

Dam5reey:


So how long can it run your TV, when there is no sun again?

The capacity is 60W.. It will struggle for sure... Continuous power will be Around 50W

The capacity of the Converter that came along with mine is 75 watts. Highest I've used the TV was last Saturday, when I used it to watch two matches at a stretch, and the battery remained 55% after, (just only the 32 inches TV and Zapper HD Decoder were plugged)

It's a good stuff to get. I got it like 2 weeks ago, but I wouldn't say I'm enjoying it the way I actually thought/expected before purchasing it. The stuff struggles to power my 58 watts Samsung 32 inches LED TV, meanwhile the 'follow-come' converter is 75 watts.

Herrostar4u:
Is buhari dead or alive?

Google is your friend, so you can ask.

I flashed the Note 2, 1gb version, using the SP flash tool on the Pc. It was actually successful, but thereafter, Invalid IMEI was what it kept saying, I was able to get the IMEI back using the Mobile Uncle Tools. It does detect the 2 sim cards, but the problem is that it doesn't bring out the Mobile Network Signal. I have flashed several ROMs on it, all to no avail as the problem still persists.

Meanwhile, I would gladly appreciate it if I could get an NVRAM and Secro backup of the phone (H532 version). Thanks

He made it clear that he's stepping down because of of Government policies from Buhari. I heard this from a credible source, and also as a minister in RCCG

Bro, forget it. That Franklin R702 is UNLOCKABLE for now.

saint2ace:

Hi Wilfem, from your explanations you used a different method from what has been written here; why don't you go through the process as illustrated on this thread, starting from the very beginning of bootshooting the board of the mifi, load the bin file and loading the firmware as if from the beginning, since you've unlocked it theres no need to calculate the unlock code using either putty or the unlock calculator, then loading your desired webui. Try these and give us a feedback.

Cheers......

I've tried so and it's still the same thing. The blinking lights still continue. Like someone once said, I've never experienced thing of such before. I even got in touch with the guys from routerunlock.com, they still said the same thing, since the device is kinda new for now

Still waiting for the assistance from you guys on how to stop the blinking lights while powered on.

frebor:


I never experience that kind error before, I'm sure guys will help you out

Same with me too. I've never experienced anything like this before. And it's like there's another guy who followed the same tutorial and got the mifi dead as mine was before reviving it back. I'm seriously waiting for help and assistance into how to make the blinkings stop whenever it is powering on

frebor:


You go need explain wetin you do for the mifi from start to finish

I shotboot it and loaded the E5573Cs loader, using Balong, then flashed it with the 21.318.99.03.00 firmware, then I also installed the WEBUI_17.100.15.01.356_MRE5, after which I later flashed it with the 21.318.03.00.00 firmware. It is actually unlocked and working fine, but the problem now, like I said earlier is that the moment it is powered off and powered on back, the 2 lights will be blinking as if it is still in that Balong stage, and it won't stop until it is reflashed again.

tyoba:


U probably did something wrong. I unlocked 322 in less than 20mins. Retained Web UI and firmware.

I didn't use the Putty method. I have already flashed the firmware and web u.i before getting to know of the Putty method to calculate the nck code, which is obviously the method you used

It has actually come up, unlocked, connecting and browsing, but the moment it is powered off and powered on back, the 2 lights will be blinking as if it is still in that Balong stage, and it won't stop until I flash/instal the 21.318.03.00.00 firmware again. It is currently using the web UI version 17.100.15.01.356. Please guys, what could be wrong?
Thanks

I've actually unlocked 302 and 602 using the same method successfully before, but this particular one, 322 is really proving stubborn to me.

frebor:



If your device is a 322 and you successfully flashed a firmware or web ui, that's a first. How to revive it, I don't know. Assuming you already removed the battery and reinserted it, it should restart normally


However if it's a 320 or a 609, and you bootshot and loaded bin file, then you need to install web UI, write imei and serial number, so follow this tutorial https://drive.google.com/file/d/0Bz5B68XA15V5ZnhrbzBxUkVZa0U/view?usp=drivesdk

That tutorial link wey you post no go do anything

Instructions on how to unlock the 322 has been explained several times on this thread, for the correct files you need, check here https://drive.google.com/file/d/0Bz5B68XA15V5a0JVZzF6Y0g2TTQ/view?usp=drivesdk

Thanks for your response. It's actually 322, when it is powering on, the 2 lights would come up, but thereafter it'll be just one and will neither broadcast nor connect.

Someone should please help me on how to get this mifi working back. I was initially following this particular tutorial here: http://forum.gsmhosting.com/vbb/f810/huawei-e5573cs-322-unlock-done-2155282/index5.html#post12230751
And have flashed the mifi severally with different firmwares, all to no avail. As of now, its just one light (network) that shows, there's no wifi broadcast, meaning that it cannot be accessed, but when connected with cable to the PC, it shows like this on the Device Manager.
I really need help and tips on how to get it working back, Thanks in advance for your wonderful assistance

Nlandking:
got it to work but stock on 3G only
theres no option to switch to 4G mode
what else can I do

Hello, NlandKing, how did you get it to work back? I have already flashed mine with several firmwares and web UIs, all to no avail as the device is only showing one light and not coming up.
I followed the tutorial here: http://forum.gsmhosting.com/vbb/f810/huawei-e5573cs-322-unlock-done-2155282/index5.html#post12230751
The device is E5573Cs-322.
Please help on how to get it back. Thanks

Bros, how much were you paid for this 'de-marketing' job you're doing here? I've been using Ntel since their inception around April in Abuja, I've also instroduced the network to different offices and they're all satisfied with their services, even though everything may not be all that perfect, but that's what they still use up till now. I'll just suggest or advise that you try their services again, probably in a different location.

So, of all the dreams, 'embezzling money' is what you can dream of? May God help you.

Thanks for the information. I'm in!

What is the model of the router? Feel free to contact me

Goal - Victor Moses

Looks like the laptop doesn't have an HDMI port. Or does it?

hitz:
Available

I have N65K, gimme your contact details and lets talk about the deal

Sellfish:
Still available

I have N70k last.