mrrobhamisi:
Guys am i the only one who found out that TECNO F6 battery is 1000mAh instead of 2100mAh? Download CPU-Z from Google play store and check your battery capacity.

guy u should not take dat cpu-z too seriously o, some of its info r not correct, all d tecno battery i used it to checks says 1000mah, even my p9 with 3000mah still shows 1000mah on it. N imagin it says d screen size of my f6 s 4.59 inch. N dat my f6 has root access when it's not even rooted

08061682213 add me to f6 whatsapp group. Am using f6

Add

how can I root this phone?

Apollux:
add me 08086574771. Thanks

Thanks mate..thought was played

Apollux:
guy u should not take dat cpu-z too seriously o, some of its info r not correct, all d tecno battery i used it to checks says 1000mah, even my p9 with 3000mah still shows 1000mah on it. N imagin it says d screen size of my f6 s 4.59 inch. N dat my f6 has root access when it's not even rooted

Thanks mate..thought was played

Anyone with safe knowledge on how to install whatsapp ➕ in this

abeg my tecno f6 no dey show anytin notifications lights
..... help

kings11ng:
how can I root this phone?

1. Download Kingroot
2. Install the app on the phone
3. Ensure you have an internet connection on the phone then launch the app
4. Wait for all checks to be complete
5. Click the center button (with Root and some Chinese texts inscribed on it) to begin rooting
6. Wait for rooting to complete
7. You should see a green tick to confirm that rooting was successful

please add me to the group 08123064329
Thanks bro

plz I downloaded the update of Tecno f6 and install it using the stock recovery ...now the problem s it takes a long time to boot & it doesn't see any momery card again ...all this happens after the update...plz mk una help me out...

my techno f6 Imei refuse to change after I finished rooting with king root. how else can I change the Imei?

Rajman:
Check out

how did you change the fonts

Seyioluwa11:
abeg my tecno f6 no dey show anytin notifications lights
..... help

seyi d f6 doesn't have any notification light

mrrobhamisi:
Anyone with safe knowledge on how to install whatsapp ➕ in this

how do u mean? D fone comes pre installed with whatsapps. If u r having problems installing it, check ur time n date. N I'm sure d pre installed whatsapp version maybe old so may need to upgrade it

Hello If you reside in LAGOS and you have any problems with your TECNO, INFINIX or ITEL PHONES, whether screen problem, broken screen or touchpad, whether ur phone doesn't boot well, any problems at all you are faced with, you can reach me via 08038603994 for repairs.And I also use the same number for whatsapp. Please I don't do custom ROM. Thanks!!!!

I updated my tecno f6 but the battery still drains fast deosnt even last up to 30mins I thought it was a software issue but when I managed to insert my brothers tecno f5 battery into the phone it worked well for long .the problem is the fake battery that tecno kept. It isn't 2000mah it's so obvious from the moment you feel how light and empty the battery was...I'll just get another tecno battery that fits into the phone.If you have a tecno 6 and you have manageto solve your battery issue pleasE kinly sharE

Please o..who's admin on whatsapp,add me abeg...08107728484

Plz guys, got this phone this after noon,rooted it...but some apps don't recognize root access... I tried installing superSu but it says I need to update binary which always failed,and I don't have cwm yet...abg help..this king root isn't 100%,any other method?

Biko, WhatsApp admin for tecno f6 please add 08067419492. Thanks

I finally figured out an easy way to gain full Shell root access and cwm...what kingroot does is provide su binaries for "secure" root...simply put,not all apps work or work properly with this kind of rooting..but as u can c,I am using super user..not king user..which provides me root access on interactive shell...and its straight forward and easy to do..but needs a pc,if u need this method.. Reply here and I'll post it ASAP

PLEASE ADD ME UP 09038072598

can someone please post pictures taken with dis fone cameras? thanks

Pls, i have questions o..
1.My F6 is new and untouched. Can Fifa 14 play very fine on it? Dat was d reason i bought it o.
2.This rooting tin.. Wat are d merit and demerit pls? "
3.How can i better enjoy my fone pls?? Thank u all..
08188305099..Pls add me up to the watapp group. Thanks again

OrangeDream:
Pls, i have questions o..
1.My F6 is new and untouched. Can Fifa 14 play very fine on it? Dat was d reason i bought it o.
2.This rooting tin.. Wat are d merit and demerit pls? "
3.How can i better enjoy my fone pls?? Thank u all..
08188305099..Pls add me up to the watapp group. Thanks again

Forget dat group... D admin has 4gotn us...he dosnt add people anymore.. Can't even reply here...really poor administration

CODEEATER:
I finally figured out an easy way to gain full Shell root access and cwm...what kingroot does is provide su binaries for "secure" root...simply put,not all apps work or work properly with this kind of rooting..but as u can c,I am using super user..not king user..which provides me root access on interactive shell...and its straight forward and easy to do..but needs a pc,if u need this method.. Reply here and I'll post it ASAP

post it already and if u succeeded in changing ur Imei let me know how u did it

kings11ng:
my techno f6 Imei refuse to change after I finished rooting with king root. how else can I change the Imei?

This tutorial explains how to change your
MTK android IMEI to a Blackberry (Or, any
device IMEI) using MTK Engineering MOD(does not require root access)
downloadable from the Google PlayStore.
1- Download MTK Engineering Mod from
the PlayStore.
2- Open/Lunch the MTK Engineering Mode
on your phone.
3- Click/Select MTK Settings.
4- Navigate left to Connectivity .
5- On the connectivity panel, select CDS
Information.
6- On the CDS section, select Radio
Information.
7- Now, select either the SIM1 or SIM2,
depending on whichever SIM you wish to
change its IMEI.
8- On this page, click on the AT+ and type E. About four
(4) options should be presented to you, just
choose either of this options below:
AT+ EGMR=1,10,”” - for SIM 2
AT+ EGMR=1,7,”” - for SIM 1
Don’t forget to put the IMEI you wish to
change to in-between this signs “” above then put cursor between AT and +, tap the space bar
9- Now, tap/click the Send AT Command
option.
10-Reboot your phone

salmaz:

This tutorial explains how to change your
MTK android IMEI to a Blackberry (Or, any
device IMEI) using MTK Engineering MOD(does not require root access)
downloadable from the Google PlayStore.
1- Download MTK Engineering Mod from
the PlayStore.
2- Open/Lunch the MTK Engineering Mode
on your phone.
3- Click/Select MTK Settings.
4- Navigate left to Connectivity .
5- On the connectivity panel, select CDS
Information.
6- On the CDS section, select Radio
Information.
7- Now, select either the SIM1 or SIM2,
depending on whichever SIM you wish to
change its IMEI.
8- On this page, click on the AT+ and type E. About four
(4) options should be presented to you, just
choose either of this options below:
AT+ EGMR=1,10,”” - for SIM 2
AT+ EGMR=1,7,”” - for SIM 1
Don’t forget to put the IMEI you wish to
change to in-between this signs “” above then put cursor between AT and +, tap the space bar
9- Now, tap/click the Send AT Command
option.
10-Reboot your phone

Who needs an app when you can change it on the fly in seconds and without even rooting your phone?

Just save urself the data and stress...dial *#*#3646633#*#* BOOM!!..INSTANT ENGINEERING MODE ON MEDIATEK DEVICED

CODEEATER:
I finally figured out an easy way to gain full Shell root access and cwm...what kingroot does is provide su binaries for "secure" root...simply put,not all apps work or work properly with this kind of rooting..but as u can c,I am using super user..not king user..which provides me root access on interactive shell...and its straight forward and easy to do..but needs a pc,if u need this method.. Reply here and I'll post it ASAP

Please teach me how to do that. Whatsapp me +255717777550

salmaz:

This tutorial explains how to change your
MTK android IMEI to a Blackberry (Or, any
device IMEI) using MTK Engineering MOD(does not require root access)
downloadable from the Google PlayStore.
1- Download MTK Engineering Mod from
the PlayStore.
2- Open/Lunch the MTK Engineering Mode
on your phone.
3- Click/Select MTK Settings.
4- Navigate left to Connectivity .
5- On the connectivity panel, select CDS
Information.
6- On the CDS section, select Radio
Information.
7- Now, select either the SIM1 or SIM2,
depending on whichever SIM you wish to
change its IMEI.
8- On this page, click on the AT+ and type E. About four
(4) options should be presented to you, just
choose either of this options below:
AT+ EGMR=1,10,”” - for SIM 2
AT+ EGMR=1,7,”” - for SIM 1
Don’t forget to put the IMEI you wish to
change to in-between this signs “” above then put cursor between AT and +, tap the space bar
9- Now, tap/click the Send AT Command
option.
10-Reboot your phone

Remind me again...why do we need to change phone IMEI my dear.Please teach me how to do that. Whatsapp me +255717777550

draxler15:
I updated my tecno f6 but the battery still drains fast deosnt even last up to 30mins I thought it was a software issue but when I managed to insert my brothers tecno f5 battery into the phone it worked well for long .the problem is the fake battery that tecno kept. It isn't 2000mah it's so obvious from the moment you feel how light and empty the battery was...I'll just get another tecno battery that fits into the phone.If you have a tecno 6 and you have manageto solve your battery issue pleasE kinly sharE

If you find a solution battery that fit in the phone please share. Cos im havn same shit wth ma phone.Please teach me how to do that. Whatsapp me +255717777550

salmaz:

This tutorial explains how to change your
MTK android IMEI to a Blackberry (Or, any
device IMEI) using MTK Engineering MOD(does not require root access)
downloadable from the Google PlayStore.
1- Download MTK Engineering Mod from
the PlayStore.
2- Open/Lunch the MTK Engineering Mode
on your phone.
3- Click/Select MTK Settings.
4- Navigate left to Connectivity .
5- On the connectivity panel, select CDS
Information.
6- On the CDS section, select Radio
Information.
7- Now, select either the SIM1 or SIM2,
depending on whichever SIM you wish to
change its IMEI.
8- On this page, click on the AT+ and type E. About four
(4) options should be presented to you, just
choose either of this options below:
AT+ EGMR=1,10,”” - for SIM 2
AT+ EGMR=1,7,”” - for SIM 1
Don’t forget to put the IMEI you wish to
change to in-between this signs “” above then put cursor between AT and +, tap the space bar
9- Now, tap/click the Send AT Command
option.
10-Reboot your phone

I know this procedure but the problem is that it doesn't work on kit Kat device like f6. have tried it severally and it keep saying not available for user build.I left a space after AT it says command msent but when I check my imei with *#06# it still remains the same

kings11ng:

I know this procedure but the problem is that it doesn't work on kit Kat device like f6. have tried it severally and it keep saying not available for user build.I left a space after AT it says command msent but when I check my imei with *#06# it still remains the same

1. Use my method

2. Did u reboot?

3. Is d Imei valid?