Lanceosas:
Pls I hv a 1.8 meter dish which I don't know the best satellite to use it for,pls I need ur kind advice.

Lanceosas:
Pls I hv a 1.8 meter dish which I don't know the best satellite to use it for,pls I need ur kind advice.

life707:


1)AFN.... @ 0.8w Cband....in the centre

2)TSTVafrica..........@3w.... above to the right (2 0'clock)

3)MBC 2,4,max......@7w...... Same

4)Africa unite tv/startimes....@5/7e... below to the left ( 7 O'Clock position)

5)Ole fm......,....,.....................@16e........ same

6)Joy prime, Galaxy, Core tv news...@28e... same


Get 8-way diseqc and enjoy FTA

abohwun:
Because of the cband scalar TSTV may be difficult to be combined with 1w but I may be wrong or otherwise sent pictures. I will advice him to use 10e as primary if he need TSTV and the other ku bands you listed but 7e will not come up except if he cut part of the cband scalar. He must be a profesioner to do this.

abohwun:
Because of the cband scalar TSTV may be difficult to be combined with 1w but I may be wrong or otherwise sent pictures. I will advice him to use 10e as primary if he need TSTV and the other ku bands you listed but 7e will not come up except if he cut part of the cband scalar. He must be a profesioner to do this.

odilibe:
...!the problem is that the two sat 1west and 3west is 2 degree apart and C the band lnb uses more space when attached minus the C band scalar it can't be achieved.... even the Ku lnb has its own feed horn..@3degree apart is possible....or @2degree apart it is possible with bullet lnb!

abohwun:
Because of the cband scalar TSTV may be difficult to be combined with 1w but I may be wrong or otherwise sent pictures. I will advice him to use 10e as primary if he need TSTV and the other ku bands you listed but 7e will not come up except if he cut part of the cband scalar. He must be a profesioner to do this.

odilibe:
...!the problem is that the two sat 1west and 3west is 2 degree apart and C the band lnb uses more space when attached minus the C band scalar it can't be achieved.... even the Ku lnb has its own feed horn..@3degree apart is possible....or @2degree apart it is possible with bullet lnb!

life707:


Will post the picture of my set up

jamesmac1:
If you are not aware, Dubai One is back on TSTV at 3w, 11088 H 30000 and 11098 H 30000

Monlo:


Please do post the picture with labelling,as I currently have 10e as primary and 5e as secondary,with 7e difficult to get till date,So as to enable me add any other bird to my set up on 1.8m pan dish.
Thanks.

eddyline:
seems ir cama 3 is off air. sad

abohwun:
I tried nailing AFN on 0.8w using 4175v 27500 without success, something I have done before they upgraded. If the frequency is wrong someone should post the righ one.

johnrayz:
Hello guys planning help.. . I am using 1m pan to get tstv, now some of the tstv channels are telling weak signal. What should I do

life707:
1.8M dish with multi- Lnb set up.

Had to remove the lnb on 16e because my 8-way diseqc could take 5lnbs from the 1.8M and 3lnbs from my 3.5M dish but the pointer depicts the position.

The marked area on the Cband scalar is where I had to cut to allow entry of the lnb

Kindly use 11167H30000 to track as it's offers u a better chance of getting the signal.

When I used 11051 and 11088 to track, I couldn't nail it

brothaken:


Which brand of cband lnb did you use for AFN 1w. Can strong HD (15k) c band do the trick?

odilibe:
...!the problem is that the two sat 1west and 3west is 2 degree apart and C the band lnb uses more space when attached minus the C band scalar it can't be achieved.... even the Ku lnb has its own feed horn..@3degree apart is possible....or @2degree apart it is possible with bullet lnb!

life707:
1.8M dish with multi- Lnb set up.

Had to remove the lnb on 16e because my 8-way diseqc could take 5lnbs from the 1.8M and 3lnbs from my 3.5M dish but the pointer depicts the position.

The marked area on the Cband scalar is where I had to cut to allow entry of the lnb

Kindly use 11167H30000 to track as it's offers u a better chance of getting the signal.

When I used 11051 and 11088 to track, I couldn't nail it

life707:
1.8M dish with multi- Lnb set up.

Had to remove the lnb on 16e because my 8-way diseqc could take 5lnbs from the 1.8M and 3lnbs from my 3.5M dish but the pointer depicts the position.

The marked area on the Cband scalar is where I had to cut to allow entry of the lnb

Kindly use 11167H30000 to track as it's offers u a better chance of getting the signal.

When I used 11051 and 11088 to track, I couldn't nail it

eddyline:
seems ir cama 3 is off air. sad