bbally:


I will like to buy it. Where is your location and mobile number?

Sorry for late response. The dish is in Abuja. Please let me know if you are still interested because of the distance.

dioss:


Well, I've not done Cable installation for the first time before
but I am following the instructions on this thread for FTA installation.
I will appreciate any help from your corner.

I think you should get an installer for now but if you have the time and ready to soil your hand, then lets get started here.
Have nailed your dish firmly and the lnb properly installed? Can your dish face the sun early in the morning without obstruction?

SANSAJAY:

Sorry for late response. The dish is in Abuja. Please let me know if you are still interested because of the distance.

Am in Lagos, it is too far.

Ameboperoo:

I think you should get an installer for now but if you have the time and ready to soil your hand, then lets get started here.
Have nailed your dish firmly and the lnb properly installed? Can your dish face the sun early in the morning without obstruction?

Lets flow I am ready to take the risk. Give me the titbits.
...
Where I nailed the dish partially faced the sun rise position.
But somebody assisted me by holding and adjusting the dish location directly towards the sun this morning.
As usual, the signal strength remained 60%. Signal quality is 0%. I bought 2 universal strong lnb which I interchanged
but no show. At least I expected the signal to change from one location to another instead of this constant 60%.

dioss:


Lets flow I am ready to take the risk. Give me the titbits.
...
Where I nailed the dish partially faced the sun rise position.
But somebody assisted me by holding and adjusting the dish location directly towards the sun this morning.
As usual, the signal strength remained 60%. Signal quality is 0%. I bought 2 universal strong lnb which I interchanged
but no show. At least I expected the signal to change from one location to another instead of this constant 60%.

Good.
Make sure the pole of your dish is firm. You will still need to snap post the picture of the lnb.
On your rcu, press menu> Installation>enter 0000 as your pin>scroll to manual scan>press green botton on your rcu (or any colour labelled "edit tp"
>modify the frequency to11050, change symbol rate to 30,000 and your polarization to H
(I assume you have no satfinder)
Now picture your dish as a clock and the lnb is the hour hand of the clock. Twist your lnb to 3 o'clock position.

Then you keep moving your dish (as you keep your eyes on the signal bar) side by side, up and down until the signal bar flashes green. Try to get the highest signal (70 and above) then tighten.
Also twist your lnb to get the highest signal and tighten the lnb holder.
Press the red botton on your rcu to scan.

Ameboperoo:

But mine has been updated and it's showing right now

Mine was showing before when I updated it to 2021 firmware until I rescanned few days ago to check if new channels were added and they all stopped showing except mytv channels only. I rescanned several times for good 2 days same thing until I downgrade firmware yesterday and they started showing again.

You can delete all channels and rescan to see if same will happen

dioss:


Lets flow I am ready to take the risk. Give me the titbits.
...
Where I nailed the dish partially faced the sun rise position.
But somebody assisted me by holding and adjusting the dish location directly towards the sun this morning.
As usual, the signal strength remained 60%. Signal quality is 0%. I bought 2 universal strong lnb which I interchanged
but no show. At least I expected the signal to change from one location to another instead of this constant 60%.

Make sure you are not joining coaxial cable. Don’t join cable for now just use one cable and check your lnb to be sure if it’s well crimped and we’ll connected and rf connectors well frightened. Also separate the coaxial cable inner copper from the back one. Make sure only inner copper is going to lNb and decoder and other wire clipped on rf back! Those 2 might cause signal loss

SANSAJAY:

Sorry for late response. The dish is in Abuja. Please let me know if you are still interested because of the distance.

Hello I am also interested I am in Abuja, Nyanya precisely

MBC stopped showing yesterday evening

ceejay80s:
MBC stopped showing yesterday evening

which of the satellites? Mbcs on 42e still working as @ now

Tara is red is it general?

jovial4real:


Hello I am also interested I am in Abuja, Nyanya precisely

Ok my friend, I will call you so we can talk & you can pick any time

Pls how knows the price of this lnb, or a good quality lnb to buy ??

Hotnholy:
Tara is red is it general?

Yes stopped working on Monday

SANSAJAY:

Ok my friend, I will call you so we can talk & you can pick any time

Ok you can as well chat me

Penuelseun:
which of the satellites? Mbcs on 42e still working as @ now

Have they migrated finally,i mean,movie africana,khdszone,beulah movies etc.

TaraHd is back but only on H265 compliant decoder, Please rescan with 11010h28775

Any solution yet for vsn,mine stoped working for a long time now. My Dish is lower than 90cm though..are they completely off now

eerekake:
Have they migrated finally,i mean,movie africana,khdszone,beulah movies etc.

That's 51.1 same vsn am asking about

Xmen149:
Any solution yet for vsn,mine stoped working for a long time now. My Dish is lower than 90cm though..are they completely off now

Still working. Retrack it or call a good installer to help you out

incogni2o:
Pls I am tired of the Naijcomsat channels.

Pls advice on any of the two best satellites to connect to.

I live in Lagos.

Pls the gurus in the House Help.

Also if you can help connect my second dish to a FTA, kindly contact me.

Thanks

I reside in Lagos. You can get across to me if you are yet to get someone to do it for you via WhatsApp 08060150782

mcemmy0z:
Guru and specialist in the house, what type of FTA decoder can I get to enable me get all MBC's package.

Any hd decoder will do. You can track the one on 7 west

Xmen149:


That's 51.1 same vsn am asking about

VSN is 45e not 51

dioss:


Lets flow I am ready to take the risk. Give me the titbits.
...
Where I nailed the dish partially faced the sun rise position.
But somebody assisted me by holding and adjusting the dish location directly towards the sun this morning.
As usual, the signal strength remained 60%. Signal quality is 0%. I bought 2 universal strong lnb which I interchanged
but no show. At least I expected the signal to change from one location to another instead of this constant 60%.

You can learn installation online but as was earlier advised get an installer and watch what he does. Else you will roast under the sun trying to nail a bird.

eerekake:
Have they migrated finally,i mean,movie africana,khdszone,beulah movies etc.

Pls someone should respond to this,before climbing my roof.

Please, I just tracked nigcomsat, how do I easily attach 28east and 45east? Any trick to this please

mahkanjuh:
Please, I just tracked nigcomsat, how do I easily attach 28east and 45east? Any trick to this please

Make 28e primary. It will be very easy.

lexxybb:
TaraHd is back but only on H265 compliant decoder, Please rescan with 11010h28775

Please what is the price of cheapest H265 decoder?

Avedonn:


Please what is the price of cheapest H265 decoder?

7k

adubam:



7k

please can you really tell if csat9900 HD is 265?