₦airaland Forum

autologic:
Enter code indeed ?
For nissan, anything that makes the ecu to not be available on the vehicle network will makes the security light to come on.

airfresher:
Ok

AutoElectNG:
I can help you start it...let's talk...see my number above

erico2k2:
So in your mind, once your car start letting out smoke the answer is to buy another Engine and please and please stop using the word NEW when you say replace Engine cos you are buying another Engine near its End of life.
Can I ask you a question what do you think Rigging of Engine means?
Let me give you a personal experience, I got one of those Jeep Liberty and the Mrs uses it now and then to go to the village, on one such journey the car parked up and the engine refuses to turn over, all mechanics says another engine,I refused and insisted on opening the Engine to see if it needs a replacement which I know will only happen if the block was bad. Turns out the crankshaft bearings were fried as loss of oil increased the temperature,.The major culprit was the Oil pump which parked up. So Standard crankshaft and bearing bought, new Oil pump, I mean brand new, and I used the opportunity to change the timing chain and its guard as a pack, rear main seal changed and ofcus new gaskets for top cylinder and main seal. Now as we speak 60% of that Engine is 0miles and brand new.

Nguru55:
I bought a peugeot 307, with a dissel engine, changed it to fuel, until it finally raised after 3brainboxes. As it stands now, it doesn't engage reverse. Hence I wan sell am.

GAZZUZZ:
this is a peugeot system and will require extensive hands on diagnosis. Remote diagnosis only applicable if you have the required equipment for troubleshooting. E.g PP2000 Scanner, fuel pressure tester, skills to trouble shoot.

GAZZUZZ:
contact me let me supply part required.

08033910382

I will require your VIn and engine number.

airfresher:
The two Fans are working well,Due to financial challenge, i resorted in driving very early and very late at night, of which i hardly meet holdup. A times,it will stall and ones i kick, it starts immediately,temperature does not go above 70, i almost forgot that i have overheat issues.but there is a little drama this morning, My belt cuts at Oyigbo,which affects the power staring,water pump and alternator,my battery is very strong,since i have pending gasket issue, i decided to fire on to island, the car did not stall, the temperature heating above 90 still did not stall,the engine so quiet that i hardly hear engine sound on idle,very cool sound.
My confusion is why did my van stall when it gets to 70 or when am on holdup when the belt is working and did not stall when there is no belt and even go above 90 still did not stall sir.Sir is there something else i need to know sir.

GAZZUZZ:
damaged head gasket. Follow proper procedure in replacing damaged gasket.

Replace radiator (with new one)
Ensure fans are working optimal

GAZZUZZ:
damaged head gasket. Follow proper procedure in replacing damaged gasket.

Replace radiator (with new one)
Ensure fans are working optimal

angels09:
You saw sane people's cars in the market. You go buy a demon possessed one. Oga find ikenna go and pay the annual subscription fee he REQUIRES before attending to you.
Toyota previa sienna Hummer bumper and picnic all dey there you nor buy
Honda dey dere you refused to buy

sultaan:
Trust me it will be easier to contact ikenna first, pay what he asks for and follow his instruction, your problem looks like it is easy to fix now.

What I don't understand is how you can drive your car at 70 degree Celsius, normal temp is around 90-95 which means your car is not even getting to the required temperature. There is something wrong with your Colling system might not be a gasket but check your oil dipstick if it has foam or water and if your coolant has oil in it

SUPERPACK:
.

MrValIk:
What is your own business fa? How e take concern you? He worked for PHCN, he is now retired. It is HIS house. Free the man abeg!

achalugonata:
If your vehicle is with the new no plate, remove your no plate @ the point of sale. The new owner is to go for a change of ownership and re registration of already registered vehicle while you can use that same no plate in registering any other of your Vehicle.

You will also need to take back from the current owner of the vehicle the original copy of your allocation and prove of ownership certificate after he must have processed his own documents.

As soon as you are ready to use this very no plate on any of your Vehicle, walk into the MVAA station where this no plate was originally registered which you can dictate from both your prove of ownership certificate and the allocation of registration no and demand for a re - registration.

In most cases, we have observed that the the current owners after having processed there documents, find it difficult to return the original of the former owner's allocation of registration no and prove of ownership certificate so we advice that before u sale your vehicle especially if it's with the new no plate, make a copy of your allocation of registration no and prove of ownership certificate as you will need it.

MVAA means motor vehicle administration agency and this is where your vehicles are beeing registered irrespective of which ever government official helping you to process it.

In vehicle documentation, VIO only issues road worthiness.

While in processing driver'slicense, FRSC, VIO, AND MVAA worktogether.
The processing begins with the mvaa up to payment confirmation, the vio does the texting ( sight, driving and the use/application of road signs) and finally, the biometric capturing is done by the frsc.

Note: both payment for driver's license and data capturing for both no plate and driver's license is done through the frsc because frsc is federal.
Thanks my Oga.