rev2214:
Feedback on items offloaded Bicycles Baby Bike, playpen, court, swing etc Gas & electric cooker Iron Clothes Cylinder Water Dispenser Etc

baby sitter

how much is the baby sitter?

This man once came to my primary school

Happy new year everyone .
Revv add me 08057337939

This is so so bad.. when will we stand against this legendary siphoning and legal thief's..
They intentionally make laws to allow them access to millions even when not in office

krasican:
dem don knack dem hammer for head

nice one dere

no, na igbale(broom)

Happy New month Rev...

Is Baby dining chair available?

How can one know when the generator oil is due for change..

Do you do swap?

So did anyone checked?

my place is far, ijebu-ode precisely.. I actually ask some in the area to check the place for me and he said its an old facility and the place looks ok..

but I'm still skeptical on why I haven't heard of the place

I also got the same invite.. but I've been searching for their website. I was wondering if it's a new company or new startup because startups' sometimes don't have a website

enochogaga:


is not true,cant the person think, can a cabrator knock engine, cabrator is just to suply the spark frm the plug flameable substance, and gas cap does dsame also, it as noting to do with knocking of engine.
tell that person to come and ask me,what knock engine, i will tell him

thanks boss

Hello Enochogaga

I sell this new Dual Carburetor gas/petrol. But one of the persons I was persuading to buy said his engineer told him it knock Generator engine.

I will like to know is this is true or you've came across such?

Hello Engr.

I will like to know why what causes the damage to battery of 2.0-5.5kva Generator. They seems to be the first thing to get spoiled

SenatorTobijah:
Haters and wicked government, they do have anything good to offer. Only for Nigerians to suffer. May thunder Fire all APC B**tards in Power from the Top to the local government.

You must be a Rapper. No offence

enochogaga:


no dont tell him to come and use thread tape, rather tell him the gen is still dripping oil. let him come and check first to see what is the cause of the oil leakage, pls we engineer's dont like costumer telling us wat to do, so pls dont tell him to use thread tape, let him just do what he knows.

and is very hard to remove an oil seal frm engine,and still use it again, is likely to spoil while removing oil seal

Thanks for advice. More blessing, more grease to your elbow

enochogaga:


hmmm, just cant say anyting about ur engineer, but using paper is unprefesional,

but dripping of oil frm ur engine is caused by,(1) bad oil seals and free allowance of oil seal sitting.
now if the fault is number(1). oil seal need to be change, and the oil seal need to be coil with thread tape to cover the allowance in oil sitting. dont used any gum of any type, to fist oil seal.

(2). if ur valve cover as fault, or the valve casket, all u need to do is to check if is the valve casket, if it just change it, same to the valve cover, but the valve cover as faut u will see the oil driping frm the cabrator cover.

lastly is the engine bolt, if the engine bolt is not properly tight, the bolt will loose due to the vibration of the gen, and when the bolt looses, the cran case casket will spill out, and oil will be leaking frm there.

Thanks a lot Bro,
The Technician a fixed the generator by changing the 2 oil seals at both sides. but still used paper to pack the seals instead of a thread tape (That's before i got to see your reply). The generator working fine for now, I'll insist he come an replace it with a thread tape.

Thanks Bro

ayodot:
Hello Enochogaga,
You doing a very nice work here, people like are you are uncommon.
My generator oil drain during use, it was stopped and fixed the following day. What i however noticed when the techician was fixing it was that, he just cut a carton paper and used it to pack something. He told me that the carton paper will be ok that it was the oil seal that got damage.

For some days now, i observed that there is always oil on the floor of the generator area. The oil observed is increasing the more the generator is being used. Please how can this be corrected. I don't want the generator to have serious fault because its a new generator.

cc: enochogaga

Hello Enochogaga,
You doing a very nice work here, people like are you are uncommon.
My generator oil drain during use, it was stopped and fixed the following day. What i however noticed when the techician was fixing it was that, he just cut a carton paper and used it to pack something. He told me that the carton paper will be ok that it was the oil seal that got damage.

For some days now, i observed that there is always oil on the floor of the generator area. The oil observed is increasing the more the generator is being used. Please how can this be corrected. I don't want the generator to have serious fault because its a new generator.

rev2214:

Yes Available at warehouse A

how much should I bring along?

Do you have anything for proline tab?

Hello Revv
Do you have a 3.5kva UPS?

I have also been having problems with this online registration of a thing. My own as never passed name availability, wrong entry always being the end point..
I think I will just find a lawyer help me through it all.

I need a laptop of spec. new (hp preferred) 500gig storage BTW 2-4gig ram 13-14 inch display windows 8 and above

This kind of insensitivity from our leaders is what our labour leaders be calling up strike for and civil activist should lead protest..
They only know how to ask for salary increment and nothing else.
Such a poor minded set of people

its a raccoon

Hello,
I need a uk used laptop at the range of 35k. do you have any?

Hello everyone, nice work we are doing here.
pls I need someone to recommend a reliable third party shipping agent contact.. thanks

Op as friend Zoned her own thread






moderator, Abeg close thread