₦airaland Forum

bbally:
please, I have good signal and quality percentage on yayi tp on 45e but cbc and idman refuses to pop up.
what and what can I do to get this signal?

please, any possible suggestions on how to get idman when yayi signal quality is 70% and above idman refuses to pop up

Predator188:
showed champions league yesterday

please, I have good signal and quality percentage on yayi tp on 45e but cbc and idman refuses to pop up.
what and what can I do to get this signal?

ceejay80s:
My fullriver AGM battery is doing very well, the fat160 is doing very well, , last week Saturday was the first time it desulfated to 0.0amp, I can't wait to enjoy it for at least 2_3yrs or more after desulfation, without nepa , my battery is on 12.9 but the previous battery is always on 12.5v with same load, 1the previous battery was backing up well at first but the only problem is it will stay on desulfating for 100 years and the battery will never charge full, but the one will stop charging after desulfating

good to hear your review. please how do you desulphate the battery and what is the maximum watt you have put on the battery without NEPA?

iamoyindamola:
Shut the fvck up Greedy piece of shít trying to justify his greediness Tueh

I copy you

Jheypeel:
Ode so you mean to tell me you could even afford the original
Leemao
Oga carry your useless 750 akube comot for here

if you can not afford something in your life. please, respect those that can and do not let hate eat the best part of you.

Jheypeel:
You mean this trash is 15k

This thread has truly gone to the dogs
You are evil and so hard hearted
Your type will do worse in government

when you talk, you should at least put in a little bit of sense. av you seen the sneakers with your eyes or you you think is those imitation you buy around?

Adidas sneaker

Location is Ikorodu

Sales!!!!
Adidas sneakers 2016 model size 42 @ N15,000

Glass tv stand @N20,000

39 inch grandkid tv working with blur screen @ any reasonable price

All negotiable

CORE:
Excel sir

please can I see the pictures of the L shape chairs

hello, please how much is this chair in the last picture if it will be made with quality leather and price for fabric ulpostery.

@digitman, thumbs up bro. I understand you now loud and clear.

Digitman2:
All the above listed, is just for educational purposes.

My brother, am always amazed at the level of your humanitarian gesture. I love you bro and thanks you for posting a comprehensive list of what the scam account can do.
checking through the list, I think satellites like 36e, 9e, 7w etc can still be done with 90/100cm dish if am not mistaken or which can be view with the 90cm or 1m dish?
@dlollyboi, thanks baba for always been there to help people out on the platform.

dlollyboi:
Just go for tiger, mediastar with forever or hellobox with scam+

please, what is the work of this scam account and what satellite does it work on.

Hello house, between gtmedia v7 and hellobox 6 decoder which is better in all spec and functions?

acedsportsng:
Fully functional Raleigh mountain bike for sale

Immediate pick up
15k slightly negotiable

ur location and last price please

adubam:
Well if you are not married no wahala. For those of us who are married and have children, your wife will just conclude say you dey embarrass her for public when you dey climb ladder like Monkey.

this is me and my family, you are describing �.

dollarnaira:
Most batteries that had stayed in shops for years before selling will ONLY b rescued by a good pulse repair charger. Regular inbuilt inverter chargers will do NOTHING.

As for me I can buy any sulphated battery any day any time ONLY with a ridiculous price though.

@wilmaria14, do you have this repair pulse charger?

unicmarket:
Good morning
Check this type out Preferably you would have taken a pic of urs.
But for that load that shouldn’t happen at all

I think is the same as mine, hopefully it needs to be replaced

unicmarket:
Please confirm if there is partial contact in your connection, shake the cables a little, if there is a loosed cable tighten it, if not then

Buy original knife switch and replace

Confirm your load wattage and wattage of the knife switch in use - It’s probably not a rating issue though, but check, there may be a need for replacement if, you find the issue still persists

thanks again, the switch is 63A and my load is 180-200W max. I thought it's partial contact too but I av loosen it and reconnect but still the same.
please, do you have a picture of the original knife switch so I know what am looking for in the market. I will appreciate any one that can post the picture.

unicmarket:
My candid opinion:

It’s ok, the “recommended current” is the max Charging current

How charger works ;
Charging does not start at 20a and ends there, as the battery gets full, your charger regulates the amps by reducing the input per time

It’s Good. You can use it.

Lastly, as concerning charging, the most destructive part is the voltage, and seeing that the voltage of you are charging with is ok.


You’ll be fine.

if you get exact 36a your 1, 12v battery wont ask for all that to charge.

The 36a is a rule of thumb for some batteries, to charge 20% of the total battery ah,
20% of 180 is 36A

and obviously you won’t discharge it below 30%

You are safe!
Safe
And
Safe
Forever
Its ok.

thanks again for been there and I really appreciate but once again what can I do or change to as my knife switch change-over always get hot (inverter side) when in use?
abeg no vex for my question.

Digitman:
Try and upgrade your decoder software , if you haven't done that already.

please, is there new software for strong 4922a decoder?

unicmarket:
According to them

The battery as 6cells
Each cell at 0% reads 1.80v
1.80v x 6 = 10.8v for 0%

But Oga no try am, no matter how good the battery is

Best option is 12.00v that’s 50% depth of discharge

Your worse is 11.5v , about 30%

But I present you option A and B, choose A, that you may enjoy your battery longer!

I hope it helped a little

thank you sir for taking your time to respond to my question but on the spec sheet it was written that the recommended charging is 36A and my ipowerplus 1kva inverter only have 10/20A current setting.
which do you think will be right to charge with but at present am using the 20A.

and this

Please house, I need a layman explanations on how best to charge this battery with NEPA and what LVD (low voltage disconnect) value can it be set at to prolong it life.
General advise based on usage of this type of battery and best way to use it.

Please house, I need a layman explanations on how best to charge this battery with NEPA and what LVD (low voltage disconnect) value should I set for it to prolong it life.
General advise based on usage of this type of battery and the attached spec sheet.

@wilmaria14, also delivered my batteries through haulage to my area which I picked up with ease.
thank you bro.
we re going to do more.

OCTAVO:
Wilmaria14 came through, he delivered 3.5kva SMR inverter. Though there was a challenge with haulage (fault of the Haulage company).
We will surely do many more biz, stay competitive in pricing!
I'm yet to install it, I may provide an update when I do.

@wilmaria14, also delivered my batteries through haulage to my area which I picked up with ease.
thank you bro.

dlollyboi:
Both have its ups and downs. Ms2727 has the acclaimed forever server but some users have claimed it doesn't save biss key and it cracks on multistream channels (though I heard they released a software to fix the later) whereas csat doesn't autoroll biss key but porting another software STB firmware can fix that.
Csat has a good tuner and hypersensitive (can be used for tracking)

are u in Lagos and do you sell at how much?

dlollyboi:
It might have probably be software issue in as much it powers on. Not all engineers understand how this decoders work. Since you've used csat and you had issues with it, I'd advise against aster because it uses same board, you can go for the tiger series.

thanks but those media decoder too looks like toy