₦airaland Forum

Does anyone know any satellite shop were i can get scalar ring at Port Harcourt?

TheDevilIsALai:
Geostationary satellites have a limited span transmission since the earth's curvature affect it beyond 30 degree latitude.

And which broadcast will Belarus be offering? This is a covet listening post to intercept our digital conversations.

Just today, MTN has been bugging me to restart my phone to upgrade my details. I did it and they were asking for my name. I gave them and the next thing my social media accounts ( twitter facebook) and my email address. I refuse to enter those. And just this morning there was a thread soliciting to provide phone tracking services in the event it got stolen by sending your phones IME and bio data. Liar mohammed is obviously desperate to track down those of us who don't buy into his pathetic lies and he has the CIA to help him.

We are the most savvy Internet users in the continent and the CIA wants to track and tag us.

exactly what i thought!You don't expect them to launch a bird then another country manages [or co-manages] it's ground base,it's now official,we are been spied on!...now watch Belarus strengthen it's ties with the west [especially The US]This is a wakeup call to everybody,be careful about the info you give out,especially those using smartphones,disable your location settings...God help us all.,Happy new year in advance bro!

TheDevilIsALai:
It's a geostationary satellite and needs a low latitude ground based centre.

They picked Nigeria because the PDP formed and pumped money into NASDA.

The ground station will be remotely managed from Belarus and NASDA will just house the ground station receivers and fuel the backup generators.

I hope they can manage that .

But what does Belarus need a geo satellite for?

There's more to this....

Since geostationary satellites are mostly for digital TV broadcast,it should be for just that,but then again,if it's for low latitude's sake;and it's ground base is Nigeria,it's EIRP might slightly be low (in Belarus) since it's latitude is low (but it's orbital position can makeup for it,on a second thought,the satellites beam might cover Africa which is the only likely achievement,if not,then we're being spied on!i stand to be corrected tho

etcwest:
@all help me install my startimes decoder,tracked SES with strong 4922 signal quality 75%.connected startimes no default transponder has signal. are there any other settings required to change on the decoder for it to scan?? appreciate your response!

what TP did you use in tracking?

oluchicago:
Please let the house have a picture of the construction when u are tru sir,also bear in mind that a CBand lnb holder wil need b constructed along side too

the "conical-scalar-ring" is indirectly going to hold the lnb,it's just the usual "lnb bracket" for small dishes will be used,checkout the setup at lemmymorgan.com;i haven't done mine yet,i was just discussing it with ugotuf,i keep the house posted when i'm done!

ugotuf:
That stuff can be constructed for sure, it didn't fall from heaven after all. I tried sending u a pm to no avail.

U should mail me directly instead (opssonopsson@gmail.com),i like your comment,i'll be go back to my residence on saturday:don't you think a "medium-sized" funnel could do the job

ugotuf:
Currently working on that 20' W on 1mtr. I will feed you back once I'm done.Lagos.

You checked out lemmymorgan today?don't you think the "conical-scalar-ring" could be constructed?

engrjoshua:
Can u throw more lyt on dat toggling aspect....
dnt really understand hw to set it on my decorder

set your protocol to 1.0,and then select 1 out of 4 for the first set of diseqc(8*1) and 2out of 4 for the second diseqc!

kibukila:
Try to use a 22KHZ switch it might solve your problem.I tried it at my setup but the receiver could not respond to both switches.

This is one aspect that even gurus somethings find it a bit confused,i think you should get another 4*1 switch,connect the "output" of the 1st 8*1 switch to "LNB1" of the new 4*1 switch....also connect the "output" of the 2nd 8*1 switch to "LNB2" of the 4*1 switch and finally,connect the "output" of the 4*1 switch to your receiver....toggle your diseqc settings for 1.0 at 1/4 and 2/4 respectively...hope it helps

ugotuf:
Bros. Keep the origin make I for see leg take wake reach house, give me some cold can malt there with some kilishi. .

lols...what bird have you been hunting recently and were are based at?

blexxonmak:
@lovala. Nice work! Just want to add that one could connect up to sixteen (16) lnbs to a single decoder. How? This could be achieved by cascading the diseqc swiches. In order to implement this setup we will need five (5) 4*1 diseqc switches which I have labeled switches (1),(2),(3),(4) and (5). Fill up switch (1) and connect its output to the lnb1 input of switch(5). Fill up switch(2) and connect its output to the lnb2 input of switch(5). Next fill up switch(3) and connect its output to the lnb3 input of switch(5). Finally, fill up switch(4) and connect its output to the lnb4 input of switch(5). Now connect the output of switch(5) to your decoder and you are set to go. Go to Installation setup on your decoder and choose DISEQC protocol 1.0. Choose port1 to access the satellites connected via switch(1). Choose port2 to access the satellites connected via switch(2),etc. Enjoy!

You post of 5yrs ago has become helpful,pls i need you to clearify me on something...mail me on opssonopsson@gmail.com

ugotuf:
Hahahahahahahahahaaaaaaaa

You want more?

ugotuf:
If you read my past posts on that 3-in-1 setup, saw the pix and have the frequencies for the 3 birds, you are good to go then.
STEPS:
------
1. (Standing behind your dish)From your multitv or amos@17' position, move your dish to your right towards where you see the sun setting in the evenings, input the frequency of star movies plus (11150/V/45000)on ABS3@3'W and track till you hit green. Lock your dish there and blind scan after you have gotten the best quality.

2. Get another lnbf, locàte SES5@4.8' on your receiver and input this frequency (12015/V/29951), place your lnbf below the primary to the left of the arm and play around there till you hit green, then secure your lnbf with a binding wire or any rope of your choice and blind scan after you have gotten the best quality.

3. Get the 3rd lnbf, locate Eutel7'W and input (11559/V/27500). This time you will have to play above the primary lnbf with your skew at 9 o'clock till you hit green. Tweak till you get 63% to avoid cracking of the mbc stations and blind scan.

Goodluck and let your next post here be a positive testimony.

barman,give Ugotuf 2 bottles of origin!!!lols

walejummy:
please house I need best tp to track mbc nilesat and abs3, pls, m already setting my ladder on d roof

Your hunting this night?happy hunting!

Janyves:
Can't remember........ Its a long time ago.... Sometime around june

Track with 12522H30000,make sure you hit nothing less than 85% so that your TVC wouldn't freeze!

idris4r83:
u need to increase the signal quality

NO! Mine is 62% and perfectly fine!

Janyves:
Tell me more about the 7'W......... Cus I tried then to get amos 5 and eutelsat 16, but couldn't hit green. Just a picture and tp's would be enough....... Thanks

please what TP did you use for tracking Eutelsat16a?

idexpaul1:
thks
But throw more ligt on se5 and abs 3 on how to track them together.

They are both located at the WEST (Though SES5 is not "totally" located at the west)i.e the opposite of Multitv,mytv etc so turn your dish around and let it be facing the sky,track SES5 first then comeback for more,goodluck!please be patient while tracking cos hunting that bird for the first time may be a little bit difficult 12015v29950 Modified:I apologise again for not uploading any pic cos i'm not in town,but i think ugotuf and pofolo has some pics uploaded already,just check a few pages back

idexpaul1:
thks
But throw more ligt on se5 and abs 3 on how to track them together.

track SES5 as primary with 12015v29950,then get a binding-wire/flexiblewire,work around the top right corner of the primary lnb...let me remind you again,PERSEVERANCE &PATIENCE is a key in tracking! Sorry to say,I'm not in town to give you any pic!

idexpaul1:
bro can you show me the picks. Though I HV already track se5 on my star time dish. Just want to know how to track two satellite on one dish. That is my greatest challenge on installation. I my going to put it on top of the abs or leave a liitle distance at the top. Thks in advance.

Sorry bro,i'm not in town but ugotuf has a pic,if you're still new in 2in1 installation,start with 36E & 28.2E (DSTV & MULTITV respectively)i bet that's the easiest to start with,tracking SES5 alone even on a 60cm is difficult!

ugooobest:
I tried both using 11150v45000 (abs3) and 12015v29950(ses5) buh couldn't hit Green on either one..abt d lnb skew, it was positioned @ 5 or 6 o'clock... though I manage to get Home base Ghana,tatanka and other channels dia buh dats nt want am looking for.. so wat do I do from here,?

Skew at 3 or 9 'clock while tracking SES5,then your ABS3 should be at the top right corner if your dish 90cm or less,hitting SES5 is a little bit difficult on a 60cm but work around it and be patient!

idexpaul1:
Yes. Picture quality was OK. 90cm dstv blue dish

if your picture doesn't freeze,then don't stress yourself trying to adjust it,some TP's are like that!Now you've done that,track SES5 as your primary using 12015v299950,get a bindingwire/flexible-wire,attach at the top right corner of your primary,play around it you should hit green.do this then comeback for more!

idexpaul1:
I track abs on separate dish. I got 43 unname channels. At 68% quality. Trying to nail it to 90% but to no avail, still at 68%.

what type/brand of receiver do you use?what is your dish size?At 68%,it should just be good enough to give you a stable picture!

Janyves:
Good afternoon peeps
All clear path to the sky's east side in my house is full of obstructions.... I could only manage to get multi tv. Now I'm reading about this 7 degrees west satellite,(I got abundance of sky space from the west). Please gurus kindly explain the best way of nailing this 7'W bird. Its been long I tracked one... And if there's more to the west side on Ku band, please educate me.
Thank you.

if you can hit green on 28.2 then you should also hit green on 16A (thats if you're interested)...west is the opposite of east,so that's the back of your current location!

ugooobest:
gurus in d houz...pls save a soul... I v bn Trying to nail abs 3 and ses5 together buh to no avail...my current dish z positioned at multi TV channels...knowing dat multi TV z positioned East and using it as my reference point, whr shud I move d dish...is it moving to west with d lnb @ 9'clock dats opposite to d current position of multi tv?

ONE STEP AT A TIME!have you tried tracking either SES5 Or ABS3 independently?what TP did you use in tracking?what LNB skew did you use in tracking?give me some answers then we can start from there!

Talibanis:
The mods have been in a deep cryo sleep for a long time now.

lol!they better be!

@ugotuf i saw a post at lemmymorgan.com yesterday,about tracking sport24hd on 90-100cm with conical scalar ring,you should check it out!mods no ban me abeg o

ugotuf:
Here is the pix for the 3-in-1 setup 1.primary =ABS3 @ 3'W 2.SES5 @ 5'E (attached under the prrimary to the left) 3.NILESAT @7'W ( On top of the primary lnbf). I hope this helps. Happy hunting.

Ugotuf thanks again!

Johnsnow24:
Picture pls. tnx

ask ugotuf,i'm not in my place of residence now Cc Ugotuf

ugotuf:
I used 12015/v/29951.

Ok,weldone!

Guys in the house,take a chill pill,lets not confuse both sats at the same orbital position:Nilesat 7w and Eutelsat 7a...these beams aren't the same!

ugotuf:
Mine is more than the bomb, I was able to achieve the trio of ABS3, SES5 and Nilesat on a 1mtr. With Abs3 as primary, SES5 come below it to the left while Nilesat is at the topmost at 65%

which SES tp did you use for tracking?