₦airaland Forum

spyder880:
No, I considered Peter Obi a good leader when he was in power, and still do. I will have no reasons whatsoever to criticize him now.

But on a lighter note, how were you guys seeing my shares, did you also see my likes and what I liked? Because I believe that if I shared 100 posts I didn't like (as I thought) I must have liked over 1000 posts supporting Peter Obi. How did you guys miss that?

Likes are not visible here on NL boss

spyder880:
@ tivta, tellwhat, chriswazo, gabbytabby, Michlins and all my friends here.

Let me address this issue, I think it's me that doesn't understand what sharing of a post on nairaland means, hence my initial surprise. I thought that sharing a post means that I dont like the post, while liking the post means that I like what was written on the post.

When I was replying this early morning, I didn't also look at what I was typing about "sharing posts attacking Peter Obi " while I was actually supposed to write "sharing posts supporting Peter Obi " that's my own error there, and it's not deliberate in anyway. Its my own misunderstanding of what "sharing" a post actually means. I have been off Facebook for over 15 years now, and have been clicking "share" on all posts I dont like, while clicking "like" on posts I like. Sorry about my lack of understanding of that process.

On the second matter which is alleged support of Buhari in his first or second tenure, nobody can get a post where I ever supported Buhari, apart from maybe sharing posts I dont like about him and his supporters, and that's an ignorant act as the one we are now talking about. You will never find me type a single sentence in support of Buhari, or against Peter Obi.

Now allow me to get annoyed a little

None of you has done half of what I have done in support of PDP when Peter Obi contested against Atiku, and none of you have spent as much time or effort as I have done in the past month while spending my money to support Peter Obi for Labour party here in Anambra, Delta, Abia and Enugu states. We are the people on ground, spreading the good words of Peter Obi from village to village.


May God help all of us.

Thank you all.

Who am I to querry ur conscience boss?
I believed something was not right somewhere for a person like u not to Support ur fellowship state man.
My Initial guess was probably Peter obi Don demolish your house before during his tenure days.
One love sir

spyder880:
Buying and offloading bamboo for this decking slab works........

This slab will cost over 5 million o

Boss u think I will gulp this amount finish?

spyder880:
What I have bought for now are

16mm - 90
12mm - 253
8mm - 50
Binding wire 1 roll
Nylon sheets 1 roll

This won't go any where

gabbytabby:
Clearly a lack of joined up thinking. Mr Spyder880 You cant reason with such just keep.it moving.

Some only live to terrorise and intimidate. Someone has been extremely generous to give you advice and answer your questions for months and then you suddenly go rouge on him. Wolf in sheep clothing.

spyder880:
1. Moisture retention in the freshly cast decking slab, the nylon makes quick drainage of water from below the slab difficult. This makes for good concrete curing practices.
2. Quality preservation for the decking wood, by keeping the wood separated from the decking slab, the quality of the wood remains high, this will allow me to reuse the wood for the next stages.

Good morning.

Is alright sir

spyder880:
Very difficult at this point, I will give a rundown of the rods after the decking. But rods should consume about N2m and above for this size of house.

Definitely more than

spyder880:
More updates

Spyder, I don't know if u have already answered this question.

Did you also use the nylon for the dpc of this building? What was the purpose for using the nylon at this decking level?

Bro can u give the rods estimate for the 1st decking/slab of this building?

spyder880:
Inspection of wardrobes, handles, painting, etc

The only part of u I don't understand is what Peter Obi could have done to u to make u support every hatred post against him.. can u clear us y?

Lexusgs430:
We don talk am tire ....... Our lips don blue .......

U no tell me o chief.
Check ur WhatsApp

semmyk:
Acting as Lexusgs430 PA for 5mins, do WhatsApp or DM @Lexusgs430 directly
Oops. My time is up.
_{[Disclaimer: only collated past posts]}



___________________

U do well bro

Lexusgs430:
IPTV lovers, that don't want to watch BBN....... Can watch OWN (Oprah Winfrey network).........

Bro how can I go about getting this on my smart tv

spyder880:
I decided to raise the foundation higher by one block, this increased the consumption of filling sand by about 10 more loads, it also took more building materials and Labour costs.

Is better to do a good work at a loss than a shabby work at profit bro..

spyder880:
Foundation for this size of building is just an average of N5m. I used N4.6m for this particular house but took some loss here, I had to borrow from the next stage budget to complete the DPC.

What brought about the loss on ur side?

Anchor84:
My brother,it’s not this season you will get that.
I presently hv one which just arrived nd I cleared it for 1.6m,Landing Cost alone was about $4,850 @610 now how much do you think I’ll sell ?even ur 2.5m won’t land this vehicle not to talk with Clearing.

Still available? Send pics

I will pm U now

Anchor84:
Badly my brother
List of my cars at the Port,Current Valuation affecting badly

Rx350 2 units 1.8m,Old rate 950/1m
2008 MDX 1.650m,Old Rate 680k
2 units 2007 Camry 950k,Old Rate 550k
2009 Matrix 900k,Old Rate 600k
2011 Santa Fe 1.1m,this still remains the same price
2012 Camry 950k,Only this didn’t change much cos we use to clear for 900k before

2008 Highlander 1.5m Grimaldi,Old Rate 600k

All these Cars,I don’t think I can get profit from them.

Baba I am following U so to know if I go jam good thing from Ur update anytime from now...

spyder880:
About N3,000, depending on how far the sand is from the foundation.

A human being will pack I Mack bucket size of red Sand for 3k?
Nawaaaaa

How much do U pay Ur workers for packing of 1 sand trip into the building?

spyder880:
It will cost about N30.5m in today's money. It could be done in 3 months with advanced planning. Everything must be ready and the site must be very accessible.

Including labor cost and roofing?

Is always easy to quote short months, when project start, reality set in..

spyder880:
You are correct, repairs on conduit pipes creates a lot of discomfort for everyone.

So which is better? Or which do U always prefer?

Cos Ur word "discomfort" looks scary sha, does it affect the building stability.
Here in abroad, I have never seen a building that has this pipes on its outward building

Itsrm:
This is crazy

As in eh!

Not just dragged, d deserve communal flogging.

Lifestone:
That Woman is very strong to be able to withstand the harsh weather and treatment that she was exposed to.
I really don't blame the Pastor, but the animal of a son who chased a 91year old mother out of his house into the rain. Elderly people are vulnerable at this age. At 91 years, element of dementia would have set in and she may no longer be coherent again. They say things that they sometimes don't know anything about and admit just anyhow to questions you asked them.
The Children should be called out and dragged for this wickedness.

EgunMogaji2:
Oga mi just go find a used ML350 here and throw N2M at refurbishing it.

Haaaaa, I don't understand this advise, I should buy Nigeria used car?

EgunMogaji2:
I appreciate your time. Looking forward to the final price. Thanks.

Don't U think this clearing price is rather much... Boss can U help me with estimate of getting and shipping Ml 350 from US, aside clearing.

Lariqueza:
it can be done for 680k based on whats obtainable at this time

Even now?

owo4mii:
2009 sienna #1.420m
2006 Benz E class #2.2m
2009 Benz Gl 450 budget #2.8m but final price tomorrow morning
2009 Toyota Corolla #950k

What's the cost for clearing 2008 Ml 350

amdman:
Budget from N4.3m

Am coming DM

Owodiran1:
uncle Amdman is back

I de tell u

amdman:
2011 Mazda 3 Sport GX

No faults reported

131k miles

N3.2m

Can u give estimate for ML350 2006 or so now including clearing

spyder880:
With holes. 6" solid is same cost with 9" blocks.

Yea, that is what I was told

spyder880:
9" blocks N260
6" blocks N210

The 6inch is it solid or with holes?