EngrCGD's Posts
Nairaland Forum › EngrCGD's Profile › EngrCGD's Posts
1 (of 1 pages)
tunlex01:Dear tunlex01 Thanks once again for your swift responds. It is gradually becoming clearer and clearer to me now. I would like to know, since you mentioned that 4 year degree in Ansu is regarded as an associate degree. What will be in my case since I graduated in same school and did only 4 years , mechanical engineering is 5 years course but because I already had 2 years Ordinary diploma in same MECH engineering, i started from 200L on a direct entry level , so does it mean in my case my B.Eng will be regarded as an associate degree ? Also does the OND certificate contributes positively to this process ? Before now, I have the intention to further my studies, is a masters degree relevant in this pursuit ? A friend in Australia is strongly advising I use the 186 employer nomination scheme. But I need your expert advice and the one from the house here. On which best route or path to follow. Is my utmost heart desire to practice in Australia as an engineer. As regards to Writing the CDR and the career episode, I’m already sensing these will pose as a serious challenge for me, please is there a way I can go about it. Finally I still crave for your indulgence to have a one on one conversation through email or even phone conversation if possible. I do like to disclose a very confidential and important information about my immigration history and I will need your expert advice. Please � Can I start by writing you an email ? I look forward to hearing from you soon. |
tunlex01:Thanks for your reply @tunlex01 My wife graduated from Anambra state university. Same as me. Please note: We have a farm, which my wife and I manages as a side business, it’s registered as a business name in 2020 with my wife and I as proprietors note we have the registration documents and bank account under the farms name, it’s not registered as a limited liability company, we primarily deals on egg production, broilers, we just started the pig rearing of late. I could see the mixed livestock farmer in the ROL ( Regional Occupation List ) . There is also the Poultry farmer under STSOL Engineering manager - MLTSSL Mechanical engineer - MLTSSL Biochemist - MLTSSL Medical laboratory scientist - MLTSSL Fitters - Welder -MLTSSL Mechanical engineering technician- STSOL Mechanical engineering draftsperson - ROL All the above occupation applied to both my wife and myself. Including the poultry farm as our side business. Honestly I’m confused. I know we were advised to ask questions and share all information here on this platform so others can learn. But Please there is something very very confidential I must share with you privately first, if you allow me I will share it here afterwards, we don’t know who might be viewing this thread at any point in time. please I kindly crave your indulgence to write you personally via email after that we can proceed from here. Thanks � Waiting for your reply. |
@bellong and @tunlex01, Good evening. I really need your help and advise on how and which of the visa category we should apply for the SKILL ASSESSMENT. Please take a look at our profiles and advice between My wife and I, who Should be the applicant here. Also advice if it’s best to go for the employer nomination scheme or explorer the other options ? Below our profiles: MY WIFE: Age : 27 years old Graduate: Bsc Biochemistry Year of graduation : 2017 Profession: Biochemist at a medical laboratory Nysc: 2017-2018 Work Experience: started work 2018 till date She is Preparing to write IELTS exam My wife is about to apply for an Australian Student visa ( offer given already for Bsc Biotechnology at UNSW for Term 1 , February intake ) MY SELF: Age : 33 years old 1st certificate: OND ( Ordinary National Diploma ) , Course: Mechanical Engineering , year of graduation 2012 1 year industrial Training: 2012 -2013 Direct entry to the university 2014 2nd Certificate; year of graduation 2018 , Course Bachelor in Engineering (Mechanical Engineering ) Nysc : 2018 - 2019 Profession: Mechanical Engineer Work experience: started work Dec 2019 in an oil servicing firm as a mechanical engineer, till date. I’m preparing to write IELTS exam also. We have a kid. She will be 5 years old by September. Waiting for your response. |
Hello house, good morning. Please assist us with below request; My wife recently got a conditional offer from the University of Bedfordshire to study Msc Adult Nursing. Now she is required to write a portfolio for entry evidencing a minimum of 600hrs of direct health care experience. Please we need help or template on how to write the portfolio. Someone should please assist us. |
Hello house, good evening. One again I humbly require below; My wife recently got a conditional offer from the University of Bedfordshire to study Msc Adult Nursing. Now she is required to write a portfolio for entry evidencing a minimum of 600hrs of direct health care experience. Please we need help or template on how to write the portfolio. Someone should please assist us. Thanks for your help. |
DreamlandAgency:Amen. Thank you � I will return here to share the good news. |
DreamlandAgency:Please sir @DreamlandAgency I already applied for Australia visa last month for Masters in engineering awaiting patiently for my grant, but my concern is I applied as self-sponsor. I submitted a 4 months statement of account showing monthly income and expenditure. The closing balance in my salary account is 13.2m. Even though my agent said that amount is enough that he has done for people with amounts less than that and they got their grants. Please Note: my school is AL1 and I paid a tuition deposit of 14k AUD, this is not included in the 13.2m balance in my statement of account. Some mates here said, it’s not good to apply as a self sponsor. Please is it detrimental to apply as a SELF SPONSOR ? I appreciate your kind reply. |
Hello house, good evening. Please my wife recently got a conditional offer from the University of Bedfordshire to study Msc Adult Nursing. Now she is required to write a portfolio for entry evidencing a minimum of 600hrs of direct health care experience. Please we need help or template on how to write the portfolio. Someone should please assist us. Thanks for your help. |
Hello good morning everyone. Please the gurus in the house, Is weed( cannabis ) tested in medical for Australian visa? Especially if one smoked 2 weeks to the medical test ? Please I need your honest answers. |
Vincentosa:Baba I disagree with you on this, the truth is that these schools know that we are using the school as a medium to cross over and that’s why they charge such huge amount for international students and this is applicable to all schools in other countries all over the world , once you are an international student and you are not a citizen or PR holder, the school will make money from you as well generate revenue for their government. Nothing like high risk because you left the school or change to much cheaper school there or even change course, even the schools know that this is the normal format nah, how you wan pay 97.000 AUD for a 2 year program or even 47,000 AUD for a year Tuition ? Nobody go pay that except folks from a rich home. Tertiary institutions is not suppose to be too expensive as international student but if the country must favor you in future, then you must bring something to the table as you dey enter. Do you know how cheap the citizens or those with PR pays for a Tuition for same course we international students pay heavily for ? So nothing like flagging us cos we dey do the needful. If there is any such thing as flagging from school then nobody will enter Australia again. If you know how cheap you can pay for a year tuition while in Australia already, you go marvel. But try use such schools to apply from here, your chances of getting a grant is slim or even rejection. If the school decided to flag you or reject you, they judged your case as an individual not as a country. Yes Nigeria is a high risk country based on other factors but not cos we dey change course or school, other immigrants/ students from other countries does same. |
kizito89:Still nothing bro, it’s already 3 weeks now and my application is still at ADB_DISBURSEMENT_REVIEWER. I don call access bank tire, really frustrating and my MSC offer is for May intake, so I’m thinking of canceling the application and using an alternative means even though it will be more expensive. If I wait for this people it may take 2 months to process this tuition payment. I shouldn’t have cancelled that first application with stanbic IBTC, well my adviser to anyone who wants to apply for form A, is to avoid Access bank for now. Unless you have enough time to wait. |
Semtu:Dear Semtu, I think this is a general situation with form A now, the problem is not just applicable to only certain banks, as I was informed the issue is from CBN. I’m currently having this same challenge, initially I applied using Stanbic bank, after 2 days it was still at ADB_reviewer. I was advised here to use Access bank that they are faster, which I did. I cancelled the first application with Stanbic IBTC , applied again using Access bank, within 24 hours my application got to ADB_DISBURSEMENT_REVIEWER, but what happened after that ? For two weeks now , ADB_DISBURSEMENT_REVIEWER dey look me, I Dey look am too. I don call bank tire, everyday I’m calling access bank, I have gone to the bank severally on same matter but to no avail. Though someone said is good to use a less popular bank or bank wey no too get customers for the application, but here you are complaining with Key stone bank, that’s to tell you how terrible the country is now. Maybe dem wan reduce the rate of JAPA. My advise to you as I was advised too is——WAIT. |
Kos26:Hello Kos26 Pls I want to quickly ask. How long did it take access bank to process and wire your payment after the final stage “ADB_DISBURSEMENT” |
Mike365:Thank you all for your inputs and answers. I really appreciate. I know I’m going to change to a cheaper school after 1 term at UNSW that’s the plan, I also know that the chances for getting a PR is greater in regional areas. But my question is if MSC in mechanical engineering is considered for PR or is PR worthy ? |
Kos26:Hello Kos26 Thanks so much for this important information, I actually adhere to your advice and it paid off, I canceled the first application with stanbic IBTC which have already stuck at ADB_REVIEWER for more than 48hrs and reapplied with Access bank, just yesterday night and this morning I’m at the 3rd stage “ADB_DISBURSEMENT_REVIEWER”, note I called the customer service and explained how urgent The transaction is, and now I have the form number. Thanks once again for the help. So how long does it take from here for the payment to get debited from my account and for the school to receive ? Meanwhile to the house, I need an answer to my initial question about PR; I asked if Masters in Mechanical Engineering is PR worthy in Australia ? Thanks for your assistance. |
Presh2021:Hello Presh2021 Thanks for your reply and explanation below. As regards to the question 1, I called my bank's central customer number and they informed me that the officials at the central bank of Nigeria have to first review and approve the transaction and then they my bank will now process the wire transfer. That the cbn must approve first. They suggested I call the numbers at the tradeservice.gov.ng and request for my application to be approved. I called the numbers no one picked. Currently at the site I’m seeing ADB_REVIEWER, is there a way to speed up this process ?. My admission is for May intake ( term 2 ). Hopefully I can meet up. Again I would like to ask. Is Masters in mechanical Engineering PR worthy ? I already got OND, B.Eng here same in mechanical engineering. School is UNSW |
Hello good afternoon house, please I would like to ask a few questions about Australian school tuition fee and OSHC payments. 1.) I submitted the form A online at the tradesystem.gov.ng and it’s showing STAGE: ADB_REVIEWER, how long does it take to gets approved and what’s the maximum days will it take for the school to receive and acknowledge my payment as well as to send the COE ? Note. I only submitted the form A yesterday 1st March. 2.) How do i pay or process the payment for the OSHC, and at what time is the payment required ? Please someone should help a brother with above questions. Thanks |
@BlegendE please check your email bro, i sent you an email....i look forward to your reply. [quote author=BlegendE post=95251014][/quote] |
@BlegendE Please bro can i have your personal contact or write you on email please, I'm also going for Masters in Engineering, i had OND and B.ENG from mechanical engineering and intend to apply at university of Saskatchewan for masters, can i get you in contact please, there are few things i do like to know as well. Thanks BlegendE: |
Thank you JustMellow...I really appreciate, honestly this is helpful, i'm happy to be part of this platform. I will start the process of securing an admission first , then i will take it up from there. JustMellow anyway i can contact you privately like one on one ? I do appreciate that. Thanks everyone JustMellow: |
Thank you Chocs, Please is there anyway i can contact you privately ? I need to discuss further with you on somethings privately. Please confirm, thanks Chocs: |
Thank Chocs for your input and reply. Honestly i'm having a lot sleepless nights on this issue, seriously i'm regretting all this anomaly. Please i have two additional questions as regards to this issue. 1.) First i don't know if misrepresentation is considered a serious criminal related issue/offense such as drugs, money laundering, terrorism etc, though i know it is a crime and it is subject to being inadmissible in US immigration law however do i go ahead to tell the the truth to the Canadian VO that i purposely and ignorantly agreed with an agent to increase my year of birth and filled up other misrepresentation data when i applied for the US visa and was denied 3 times and i that also went ahead to apply for UK visa which i was denied on the ground of insufficient fund only? 2.) Even before the thought of applying for Masters to Canada , i already decided that i will apply for US visiting visa , not for the purpose of travelling actually but to RIGHT ALL WRONGS, i will going there during the interview, i will openly inform the consular , i have no intention to travel, i only want to make a confession, i will tell him/her that i only came here to free myself of the constant guilt feelings, that i'm truly sorry for what happened few years ago and that i wish i was never there and it never happened, that i acted on impulse, despite the fact that everything that was misrepresentation have come to pass , such as - My age was increased up to 7 years, 2013 till now is 7 years already, i could have waited... - The agent stated in the application form that i was married, then i wasn't, but now happily married. - The agent stated i was a university graduate, but then i was only an OND graduate, but right now i have a B.ENG also and have served. - That i was gainfully employed , all not true , right now not just self-employed but an employer of labor oh how i wish this never happened. So my friends and the gurus in the house, should i go ahead and book an appointment at US embassy to report myself and correct my bio data and update my true profile with them , i'm willing to accept whatever is the consequences of my action and to plead for forgiveness rather than waiting for them to find out ? or should i avoid US embassy for the remaining years since i heard biometric data takes about 10-15 years to expire and get wiped on their system, please how true is this , i need help ? 3.) Finally how do i go ahead to explain all these on a note to the Canada VO or should i just tell them only about the discrepancy on my passport year of birth that it's a mistake that was done at immigration and that i was asked to use the passport until when it expires so thecorrect changes can be made, and that now i have gotten a new passport with the correct data, if i just state it this way, what about the wrong profile with the US and UK, will they be able to get that information from these embassies. I'm confused I'm really confused and lost right now, please help a brother, or should i suspend applying for this study visa until after 10-15 is completed from 2013/2014 so this biometrics at both embassies must have expired But i really need to apply for my masters, this is the best time to do this as i wouldn't want to have a case of a STUDY GAP in future, and i'm very sure to get the visa considering my TIES, status and educational history ( OND mechanical, B.Eng mechanical, and intended Masters also mechanical ) but this issue at hand is discouraging me, or should i go ahead apply for the study visa (masters) for my wife instead though she prefers to manage our businesses here , she studies Biochemistry (2.1 ) and won't this still come back to hurt me even if i try to avoid it , please guys help me with the best advise right now. Waiting for your inputs. Please my friends help a brother. Chocs: |
Hello gurus in the house, good morning @Frankrobbn1 @naijaforeigner @JustMellow @Lekiboboe Etc Please i need your answers on my below questions; 1.) When filling the Canada study permit form, does the form require one to indicate if you have been denied any country Visa previously especially US and UK ? 2.) If YES, does previous US and UK visiting visa denials have any effect on the outcome of your Canada Study permit Visa ? 3) Please is it true that UK, US , Canada and Australia share same biometric data with each other or information of applicant denied a visa ? 4.) Lastly please i have a very important issue bothering me which have prompted all the above questions, sometime in 2013 and 2014 i was denied a US and UK visas and the date of birth on my international passport was incorrect ( Wrong year of birth but with correct Month and day of birth) , the visa agent filled up some misleading information to correspond with the age increase ( About 7 years added to my real age) , then i was so desperate to travel, i only have my my OND cert then, after the visa denials i decided to stay back and further my education, so i later proceeded and got my B.ENG , now i want to apply for masters in canada and i'm well established here in Nigeria with 2 companies, married with other TIES, i have been living with the guilt of the misleading data on my passport and information at the US and UK embassies and because the wrong DOB will not also correspond with the DOB on my educational document ( e.g WAEC) i have applied to go to Abuja soon to correct the information and have the date of birth correct on a new passport to apply for the canada study permit. Now my biggest fear is, if the Canada consulate will get my previous data information from the US or UK embassy. I have not seen the Canada Study Visa form if the question for previous visa denial for US , UK or any other country will be asked or not, but definitely i'm willing to say the truth in my application and ready to face the consequences, i just want to make everything right , i regret my action few years ago. I was misled by the visa agent then. NOTE: i traveled to Dubai twice (2013 and 2016) with the wrong year of birth, though the passport with the wrong year of birth is expired and like i said, i will soon have a new one with the correct data. UK informed then that i had insufficient funds as reason for denial while US, didn't give any reason for the denial, simply was denied after interview. Please kindly reply my above questions and advise me on what to do guys. Please help a brother, i'm really bothered. |
@Lekiboboe Thanks so much for your assistance, this is really helpful. Please i do like to ask few more questions; 1.) Do i need to state in the SOP that i was recently offered an admission in same masters program here in Nigeria but opted out and decided to broaden my knowledge in my field of study by applying to study in a Canada University and then include admission offer as proof , will this be an added advantage or should i completely leave that out and not mention it. 2.) Secondly do i need to apply for a full time or part time Masters program. I look forward to your kind reply and clarification. Please everyone , i do like your inputs on my below questions earlier especially the unanswered No. 6 and 8 Regards Lekiboboe: |
Hello Good morning everyone, Please i need your help and guide on how i can apply for a Masters in Mechanical Engineering and study permit in Canada. I intend to sponsor myself Below is my educational background, financial and social status. Educational Background: 1.) OND at a Fed.Poly, Mechanical Engineering ( 2010 to 2012 ) with Upper credit 2.) Went for direct entry to a university and graduated with B.Eng. Mechanical Engineering ( 2014 -2018) with Second class Upper 2.1 3.) Completed NYSC service Program 2018 - 2019. 4.) Applied and already offered an admission for Masters in Mechanical Engineering at the university i graduated here in Nigeria, but changed my mind and don't want to proceed anymore with the studies here. Social Status: 1.) 31 year old 2.) Male 3.) Married 4.) 3 years of marriage 5.) A kid ( 3 years old) Financial background: Own two registered companies with my wife and daughter as signatory/ board members. 1.) A registered company for my real estate business ( Buying and reselling lands mostly ) with company bank account little above 20m Naira 2.) A modern Farm with registration documents ( COC etc and bank account) little above 10m Naira. 3.) Personal account but not much savings, majority of the funds are in both company accounts, Guess i have to start paying myself and wife from the company account to build my personal bank account statement. Usually I make both family and personal expenses from the real estate bank account. 4.) Daughters savings bank account with substantial amount for her education about 3m naira 6.) A landed document with C OF O though jointly purchased by a friend and I and shared into 1 plots each. ( purchased amount 36m Naira), registered in our both names ,( each of us have a certified true copy of the C of O ) and registered power of attorney. 5.) A lot of other Personal landed documents ( Mostly purchased native lands ) but not registered yet only with power of attorney and survey plan, though I intend to register the documents if there is a need for that before my visa application. 6.) Farm is build on 6 plots of Land , although the landed documents is not registered yet also. Like I informed earlier i intend to apply for Masters in Mechanical Engineering ( Production or materials engineering ) in Canada, but i need a guide and answers to below highlighted questions. 1.) Which top ranking and reputable school,should i apply to, for Masters in Mechanical Engineering ? 2.) Is there chances to apply to a school that won't request for an additional English exam such as TOEFL or IELTS ? 3.) A Low tuition fee university but with good reputation and top ranking ? 4.) School with refund policy should in case of visa refusal ( though i'm very much positive). 5.) What is my chances of getting the visa if i apply along side my wife and daughter as dependent or should i apply alone and later can file for them to join me over in Canada if the Visa is granted ? 6.) Do i need my wife's approval if i inform the VO that part of my company funds will be used to sponsor my Masters degree program ? 7.) Do i need to build my personal bank account to have the required funds to cover my travel expenses and as well as the tuition fee, maybe after paying the first year tuition fee though depends on school. 8.) Do i need to start paying self salary from my both companies or this is not necessary? 9.) Finally what is my chances of getting the visa with my above STATUS. Please help a brother, so i can know where and how to start. Thanks and anticipating your kind assistance. |
1 (of 1 pages)