₦airaland Forum

brabus:
@ crisisng, na patience no be war go resolve this matter. Maverrick no fit fight me. He's just bittered at the moment. He'll soon get over it. But I think this case will die natural death if we let the sleeping dogs lie.

I'm open for dialogue and further discussion on the subject matter on other platform apart from this forum. You may want to setup a group chat for us to discuss a final resolve.

Meanwhile, I'm in discussion with 3strike at the moment that I'm doing this on the condition that he's ready to make peace with EgunMogaji. He's still doing the shakara but he knew I won't back out until he gives in.

Let's make the world a better place.

SAVEDBABA:
picture pls

FastShipping:
Hmmm....

PassingShot:
Fayose will definitely live to regret his atrocities no matter how long it takes.

He lacks wisdom to realize that his tenure ends about a full year before PMB's. And should he lose his reelection bid, he will be brought to face consequences of all his past atrocities.

Let him enjoy his immunity while it lasts.

euromilion:
@egunmogaji,
I think empiree is telling the truth,a friend bought one in 2010 for $3000,I couldn't believe it then,I was full of regret because he told me about it then,but I was just like you are now,although then Detroit was bankrupt,so they needed people to wake it up to live,however the rule then,was that you must live in the house then.

I love to try my hand on one of those,if the opportunity arise again.

davinchi:
I used 0.45 gauge

eghosajohnny:
You can do it this way build a 3bedrm and 2,2bdrm flat to mmake it 3flat and deck it finish the ground floor you will stay at the front and rent out the 2flat of 2bdrm.

Break down below

Foundation;2.2m
Block work to decking;2.3m
Decking;2.7
Plastering;750
Sliding window;600
Doors;750,000
Tiles of the 3bdrm and 1,2bdrm flat will be 700,000

We might not work on the 3rd flat like the door and window and even the plastering so to use the money for electrical and plumbing of the 2 other flats but at least you have a 3rd flat on ground and a decking you can raise in future.

You can call me on 07031886484,07014709098

davinchi:
TO ALL THE BUILDING PROFESSIONALS
What is the best material to patch leaking spots on the roof before POP? Bearing in mind that the roof top can no longer be climbed in other not to destroy the Metcopo steptile roofing sheets. Flash band is said to drop when the roof is very hot cos it's been placed under the roof.Some have suggested silicon gum and other stuffs. Pls experts in the house over to you. Thanks in advance

lastpage:
Can any BUILDING PROFESSIONAL tell me when it is the best time to remove the Bamboo struts under a Decking, from the day of Casting the Decking?

I have heard 10 days, 14 days, 21 days, 23 days...... but l want to know which is right, and why?
Tnx


Lastpage!

TouchstoneNgr:
Hello sir,
Single flush door is 50,000 this includes installation, door key and accessories.
Regards

FastShipping:
open....

segzy14:
True talk cos this place is no longer safe.

Arnoldfish:
you can try my tiler, he's trustworthy to me, dunno if he will be trustworthy to you too...He's togolesse too...and if the area is not big, he might either be quite expensive or starts acting willie willie

Tunami:
na ab0ki people go suffer pass.

Adeymotors:
Hello Sir,

I texted and called your number but not in service.. Can you update me with your new number please.. This is Adewale (2009 Camry from Phoenix, AZ) thank you

brabus:
@Fastshipping,

The possibilities are endless. I can see the guy is doing EBM but you can still get a better design if you work with a good detailer and fabricator.

Times like this always make me want to be jack-of-all-trades.


Take a look at the window below (picture taken from The Reserve by NextHome). We made us of the cheapest Aluminium profile (one of those thing profiles you hated ) but we came up with a very different arrangement that makes it appealing to everyone who visited the house.

Someone else would have opted for a different design with some funny partitions that will take away the beauty. That's exactly what I mean by getting your designs detailed and getting a good fabricator who can build to specification. Many times good things are not always pricey when the direction is clear.

brabus:
I've placed a caveat on recommending people. Otherwise, I could have shared number of a guy who can come with various samples of Big Profiles and probably a toilet window made with EBM. I doubt he can bring a much bigger size due to cost and weight.

But they don't need to tell you. The difference is clear!

brabus:
^^^

Sure they can. Even any other profile can get you that or something close especially if you visit Tower Aluminum office or the Aluminum Village, Lagos with your design requirement.

The problem is not the availability of the material. The problem is the fabricator who chooses to use what he knew as against what the design required.

Hope you get it now.

brabus:
Visit Aluminum village. Subuola street, there are local fabricators there.

You'll need to go with your window and door schedules, though.

brabus:
You can see what you posted above in Ikeja. Just ask for EBM. That's the name of the profile.

_______
The uPVC guys here are in Badore, Lagos. We have a number of them here (3 of them in Badore) including the popular Golden Ever (Chinese company) at Langbasa, Ajah who are the biggest maker of uPVC Windows around but I settled for this because my job requires close supervision since they're custom built Windows. Chinco won't allow me use into their facility.



Pic - UPVC door (Made in Nigeria)

brabus:
But if asked what led me to this guys, it's the neatness of their jobs.