Keep the hard work going bros. Despite that you still need to learn and try as hard as you can to carry every one in the social strata along instead of disenfranchising among classes of people.
I was not really with your policy within.
From the knowledge I gathered in school, we(engineers) are there to solve problems.
In maintaining a certain standard, sacrifices have to be made. We loose a lot of money by limiting our selves to certain vehicle ages and brands, but at the end of the day premium service delivery is our goal for any vehicles we accept.
I have opened several threads that can help with remote diagnosis of vehicle faults.
AutoElectNG: Sometimes one cannot help but not follow the manufacturer's instructions...what if for example through no fault of the manufacturer...the part that needs to be replaced is not available on the market and no one else makes that part but the client wants the car to be drivable, I have recently run into this issue, then the ingenuity of the technician comes into play...it makes for an interesting story...more on this soon
Introducing 2 new businesses, targeted at meeting clients closer to the center of Lagos.
Gazzuzzlogistics
And
Gazzuzz auto part sales.
Both offices are located in Mushin ladipo.
You can request for parts from the market and have them delivered to you any where in Nigeria, you can also request for parts from our shops in Mushin or Head office and have them sent to you anywhere in Nigeria.
We also offer home pickup and delivery of any items within Lagos. We have logistic bikes, mini busses, large busses,and trucks to handle small medium and large packages.
fxtee: Good morning Oga Gazzuzz, I bought a Nigeria used Kia cerato 2007 but once I accelerate above 60, I will be hearing a noise inside the car that is even louder than the car audio. Please what can be the cause?
suspension related? Check and replace bearings aka wheel hubs
Jiouras: Good day Sir Gazzuzz, I’m having a problem choosing a car to upgrade to
I’ve been using a 2005 corolla sport for about a year now and I’m considering upgrading my car to either Lexus is250 2008 model or Toyota Corolla sport 2012. The only problem I’m having is if the Lexus is good and economical for Nigerian roads
PS: I travel a lot and I’ve never had any major issues with my 05 corolla... Hoping which will serve better between the 2012 corolla and 2008 is250
aAK1: I have this Peugeot 306 for sale. Car is clean, how ever car came with some issues I wouldn’t want to to spend time on. THE BAD 1) car hesitates to move 2)abs fault THE Good 1 )car has never failed to start at first crank 2)Ac cool like crazy 3) car isn’t converted(direct left hand from Germany Overall car is good if not for the above stated issues Contact 08106698900 or 07061296381
Ty207: Good Morning Oga Gazzaz My car RPM is getting low at idle and it make my car to vibrate corolla 2003 even without ac no...once am in traffic it start to vibrate i just change the fuel pump and i service the nozzle yesterday, no difference pls help i always put the gear on neutral in other to stop the vibration and the rpm will come up abit on drive rpm 400 on neutral rpm 700/800 but everything work fine when am not in traffic
Had to look again, please watch this. Your car is a 2003 and does not use an electronic throttle body.
Ty207: Good Morning Oga Gazzaz My car RPM is getting low at idle and it make my car to vibrate corolla 2003 even without ac no...once am in traffic it start to vibrate i just change the fuel pump and i service the nozzle yesterday, no difference pls help i always put the gear on neutral in other to stop the vibration and the rpm will come up abit on drive rpm 400 on neutral rpm 700/800 but everything work fine when am not in traffic
Ty207: Good Morning Oga Gazzaz My car RPM is getting low at idle and it make my car to vibrate corolla 2003 even without ac no...once am in traffic it start to vibrate i just change the fuel pump and i service the nozzle yesterday, no difference pls help i always put the gear on neutral in other to stop the vibration and the rpm will come up abit on drive rpm 400 on neutral rpm 700/800 but everything work fine when am not in traffic
I took my Camry 04LE to mechanic for a top gasket change. Fast forward to when he starts ripping everything off to remove the top gasket, 2bolts out of 6 or so refused to screw out (this is the 4th day please help).
He suggested a welder could do some magic, bros till now nothing o.
Sir please what else can we do, the car is stuck cos he has loosed everything. I have spent cash conveying welding machine and generator up and down
blunt tools.
Yes welding is presently the only way out. Sorry for your troubles .
Modified.
Looking at the picture , i think you should warm up because you will have to replace the cylinder head. There is no way the welding rod and the metal piece being installed will fit .
mbahjohnpaul: Greetings chief Gazzuzz. What's ur advice on Honda pilot 2007 model. I want to get the car cos my road is bad . Pls will u recommend the car ? I need a blunt review. Thanks for the free consult
You are better off with an axle at the back. Look at the 4runners
NanaF: Hi Gazzuzz. Please what does it mean when a car’s Carfax history stops at Feb 2017, no record of auction or sale or theft and it was recently imported into Nigeria. It’s Canadian used. Is this normal?