₦airaland Forum

spoton16:
Hello Mr Gazzuzz, please have you had any experience with the 2008 Mazda CX-9?
What’s your take with the Mazda in general. And what engine oil should be used In servicing. Thanks and God bless

dannybrasky:
How better can it get!! Look at your bank account and smile once again sire!!
Congrats.

This was a good one

On to the next one. It might need prayer and fasting

https://www.nairaland.com/5421108/2010-corolla-foreign-used-54000

diportivo:
I will appreciate the phone car holder

thanks

Gboliwe:
I called you with phone number 0803****017

Item will be delivered to E**** State

Name: V***** A**b***

I will send you a text with full details

Thank you Mr Gazzuzz.

Mmgboji:
I have duly followed the action in both the video and your suggestion yet no success. Although their is a 10mm bolt and nut under my Pedal assembly as against an empty hole in the Pic. I replaced that screw and tried to replaced it with a slippers nut as shown in your illustration. Yet no success.

ronkusesther:
In his presence there is busting of evil

GAZZUZZ:


Vehicle history and info

https://www.copart.com/lot/39611759/

My contact +2348033910382

My WhatsApp https:///2348033910382

No price will be displayed or negotiated here.

Serious clients know where to negotiate.



https://www.youtube.com/watch?v=uEhd9IZ0_AY

Tebilly:
Good evening house. Pls, I need help from the gurus in the house on my rx 300 (2000 model). Whenever I start the engine and put it in drive D, it works well, but as soon as I change into reverse, R, the engine shuts off and I would need to restart the engine. However, once the engine warms very well, the reverse gear works well without shutting down the engine. Whenever I want to use the motor, I would start it and allow it to warm very well. Pls, what could be responsible for this problem. This is frustrating because the motor can not be used in case of emergency.

thebigkendo:
Cyberpeace

In his absence there is fullness of joy

Nickisindigo:
3.6 billion naira and he still dey naija

Na to use like 500 million buy Maltese citizenship for my family

joshyo1:
I scanned my Camry 99, and the following codes popped up

*P0105 manifold absolute pressure/Barometric pressure suit*

*P0120 throttle/ pedal positioning sensor switch A circuit*

*P0446 Evaporative emission system vent circuit*

*P0446 Evaporative emission system vent control circuit*

Please I need help what do these mean and how do I proceed?

Caustic001:
Greetings Oga Gazzuz. Pls would you recommend a volvo s60 like the one advertised on this page for a first timer?: https://www.nairaland.com/5526148/just-arrived-foreign-used-2005#84999628
Important to me are:
*reliable
*good ac
*cheap maintenance
* Durability
*decent fuel consumption rate
Thanks

There was one that nearly killed my friend , he was always bring in parts from outside the country.

The car is over engineered, imaging having your serpentine belt in between the engine and transmission

I would say A BIG NO.

Nettuno:
Oga Gazzuz,
Please I just got this 2008 highlander limited. At first start in the morning, it produces heavy grey smoke and water from the exhaust, but in the course of driving it clears up. I put my finger in the exhaust pipe and it comes out painted with heavy black powder and water and smells like something burnt. There is no oil leak, shortage or check engine light. What could be the cause of this thick grey/blue smoke and water from exhaust in the mornings particularly? Thanks.

rexlims:
Good morning oga gazzus, Ur moniker keeps been referred to anytime I come to auto section and it's mostly positive comments.
Straight to d point, I need a clean direct toks Toyota Camry either crystal light or big daddy am in Edo State. Can u fix something. Here is my number 07039612049. For private chat.
Thanks as I await Ur response.

Lexusgs430:
This is a modern form of giftnapping........... Forcing a grown man to offer gifts (by fire or by force), under durex (abi nah duress)......

GAZZUZZ, I feel you pain..... The pain for been a sugar daddy and also popular..........

Casemiro:
nice suggestions there..




You can keep saying insecure all you want, but Everyman to his own..


some men want women working in big organizations and offices, while some prefer them stay at home..



Stories flying up and down especially on Nairaland are enough to make such men not change their mind.



from colleague colleague,

they start something funny.

Before you know one thing has happened and the do done.



It's not insecurity on the part of such men,

they just don't want their wives to always be in an occasion of sin, where there would be much pressure..





no need trying to sound politically correct, we know what really happens inside life..



once again thanks for your suggestions.



MODIFIED !!!!!!



If you like quote me full textbook calling me insecure, I will never try to sound politically correct just to win cheap likes on nairaland.




You can give motivational quotes or try to win likes all you want, but we know that


theory is different from practical.




Inside life, we know how things operate.




I asked a simple question,

'' What Wife Friendly Occupation Would You Suggest? "


Can't you just pass if you don't have contributions?





marriage is for two who agree to get together.



If you are a career woman, marry a career man.


Simple!

Gboliwe:
Dear Gazzuzz, I would appreciate the wireless neckbands.

Thank you Sir

Forward77:
That’s the characteristic feature of a fixed match.

Mmgboji:
I am in Abuja

joshyo1:
I scanned my Camry 99, and the following codes popped up

P0105 manifold absolute pressure/Barometric pressure suit

P0120 throttle/ pedal positioning sensor switch A circuit

P0446 Evaporative emission system vent circuit

P0446 Evaporative emission system vent control circuit*


Please I need help what do these mean and how do I proceed?

Mmgboji:
Hello Car gurus,
My car as described above suddenly refused to accelerate. I ran a scan immediately and got P0121(throttle/pedal position sensor related) as the error code. The technician has replaced the throttle position sensor with same part number as mine, replaced the throttle body, checked the wirings and even tried out a new ECU same as mine, yet the car is still not accelerating beyond 1200Rpm. The code has been cleared repeatedly but still comes back almost immediately.

Brethren, am in total confusion at the moment. Any suggestions on what the issue might be?

Thank you all in advance for your contributions.

BamBamK:
argh..... make I call em BCDs come??

abeg o! They will soon say it is cyber bully tins

BamBamK:
lool..... sharp guy. I meant restoration project.

BamBamK:
no more updates??

foolbuster:
Has legalwealth been finally sent to a correctional facility? gist us na aaaa.

thebigkendo:
Waiting...................