₦airaland Forum

Experience people please help me,i have been driving my golf 3 beautifully until recently when
i started experiencing hard start.i need to press down the accelerator pedal while trying to start the car and this take some few minutes and it will almost run down my battery before it will eventually start.

The funniest thing is that it only happens once the engine cools down.for example when i start it in the morning and i put it off for like say 30 minutes it starts immediately,put the reverse is the case if i allow the engine to cool down say 3-4 hours.

two mechanics i invited have asked me to replace the carburetor,its an electric carburetor.

please is there any one in the house who has experienced similar issue.
i need advise please.

my golf 3 is doing hand starting,i have to turtle while starting it and this takes between 3 to 4 minutes to start.

could carburetor be responsible for this.please gurus in the house help.

momahnany:
Pls my auto gurus help me! I hv a golf3 that rises in voice or accerating sound without me pressing d acceration pedal and when it does so the accerating meter on d speedomer don't return to normal until after some time. the last time a mechanic touched the caburator it got worsen-it was consuming fuel nd d smoke wz black.I waz forced to buy anoda caburator and same thing is happeng again. pls advice my auto experts

pls how much did you buy your carburetor.

good day guys,i drive a golf 3 which run smooth on the road until one morning when i was about to drive out only to find out that
car would not start.i had to turle while trying to start which normally last up to 3 to 4 minutes before it will finally start.

I took it to mechanic and i was asked to buy injector cleaner which was used to clean the carburetor (its and electric carburetor).

The cleaning did not solve the problem as same was experienced on daily basis.some one suspected the key fibre and i was advised to call on a rewire for replacement this i did and the key fibre was replaced. i started my car normally for two days and i was about to feel a sign of relieve when the next morning the same problem started again.i immediately called on the rewire and he said he woul take the car to where he bought the key fiber so they can replace it there and then.to cut long story short it was replaced and after three days same issue started again.

i called him yesterday and he said he suspect the carburetor,he said i will need to call on a mechanic to service the carburetor or possibll replace it.

pls i need help could this be the problem i need advise on this issue.

[color=#006600][/color]

spyder880:
30

hat was a very quick response my oga.My God bless you and give you the enabling grace to finish this project IJN.
pls Sir one more question what is the maximum you will expect me to mould for 6'' block.

That was a very quick response my oga.My God bless you and give you the enabling grace to finish this project IJN.
pls Sir one more question what is the maximum you will expect me to mould for 6'' block.

spyder880:
30

spyder880:
For this particular house, it was planned to be 2.1 meters. It differs from site to site for a lot of reasons.

spyder880:
For this particular house, it was planned to be 2.1 meters. It differs from site to site for a lot of reasons.

spyder880:
This thread is opened to document the processes of building a small 5 bedroom duplex in a rural area in Nigeria. It is a thread to promote affordable housing for those willing to construct their homes at the lowest costs possible, while imbibing the best engineering practices.

We did not decide to mold our own blocks here, instead, there is no block industry around this town, so we have to make our own blocks in this location. I am not going to include the cost of clearing this site, as the conditions here might be different from that in many other sites.

We have made about 3,400 blocks of 9" to start this foundation, and the costs of making the blocks are as follows;

1. Bags of cement N1,750 x 120 = N210,000
2. Workmanship for making the blocks N600 x 120 bags = N72,000
3. Trips of sharp sand N8000 X 12 trips = N96,000
4. Carriage and packing of the blocks N 30,000
5. Security and misc. N10,000
Total cost for making 3,400 blocks is N418,000 (this means that each block here was produced with N122.94 only)

Another cost we have incurred here is a well for water supply. This well was done for N120,000, everything including workmanship and plastering works.

This will mean that we have spent N418,000 + N120,000 = N538,000 so far even before starting the foundation of this house.


TIGERKENN HOMES
08033350750, 07081821271, ckenneths@yahoo.co.uk
Perfection is our goal, excellence will be tolerated.

FULL DISCLOSURE: THIS HOUSE BELONGS TO SPYDER880 HIMSELF. THIS WILL BE MY RETIREMENT HOME WHEN I QUIT ACTIVE BUSINESS. THIS LAND AND BUILDING IS LOCATED AT NOMEH-UNATEZE, NKANU EAST LOCAL GOVERNMENT AREA, ENUGU STATE. THIS IS MY FIRST VILLAGE HOME.

[color=#006600][/color]

Good job,how many blocks did you mould with a bag of cement.

is it first body and if yes can it fly for 500k and where is the location of the vehicle.

nice job,pls how many trips of laterite did you use to fill the rooms.

I will never forget MRS YETUNDE BADMUS she is the best teacher i ever had all my life.
she taught me in pry 6.
Happy teachers day to you ma.

am a serious buyer and am willing to pay 700k for this ride

AUTOCRATIC:
Available for sale

serious buyer 700k

how much is the rent and aalso the agent fee. email me philipusmos@yahoo.com

what are the features of this baby;does it have AC,power window,e.t.c engine capacity 1.6 or 1.8

serious buyer

wallyg:
This car was bought brand new in America just driven for few months in Nigeria.
For more info call 08141636678 or 08024012315

how much sir.

pls post more pics and more description about this ride v6 0r v4 e.t.c

whats the rating of the sony +is it dvd and does it come with a remote.
how long have you been using it.

what a delicious and sumptious ant,it goes wella with g4 or bread.
i remember one night in my hostel at the uni me and ma child hood frnd who share the same room kill hell of this
termite. we had almost a bucket full of it.every body just de form like say them never see am not to talk of eating it before.
But guess what as we were frying this thing no so plates just de truck in from all angles.
guys eeh.

i never get time take catch am for this lag.

what a delicious and sumptious ant,it goes wella with g4 or bread.
i remember one night in my hostel at the uni me and ma child hood frnd who share the same room kill hell of this
termite. we had almost a bucket full of it.every body just de form like say them never see am not to talk of eating it before.
But guess what as ew were frying this thing no so plates just de truck in from all angles.
guys eeh.

i never get time take catch am for this lag.

what

INTROVERT:
if I tell you a story about FRSC account...

what about their account.

becose the last time i was stopped by this FRSC guys and they counted so many offences for me,after pleading with them they gave me a ticket of 5k to pay in the bank.

or is the account their own personal account.

we need to know.

post pictures of your past works.

i am interested in one of this shoes, but you didnt drop your contact.

pls drop your mobile number as soon as possible.

when i was in orientation camp during my NYSC in Ekiti state,there was a place called Ilejemeje we were told its an island of snakes.

they said snakes moves in and out freely from homes,they stroll like lizard and they are not being killed cos they are harmless.

I prayed so hard to make sure i didnt serve in that village.

dayomide70:
@imoci, you can answer me here then.
What part of ikorodu? Which one should I quote for and how many tonnes? Or should I quote for 10 and 20 tonnes?
Thanks

just quote your prices base on how you supply. i.e. 10,20,30,40 etc.on sharp sand,laterite.you may be my nest supplier as i will need sharp sand soon.

As for the area its Agura in gberigbe.

dayomide70:
Weldone brother,
Dayomide Stones Nig Ltd
Kindly contact me for your Granite,sharp sand,stone dust and sand filling. I supply to any part of LAGOS state and OGUN state.
Best price and good customer service.
Contact me on: 08117119290
E-mail address: dayomide70@yahoo.co.uk
What a man can do,a woman will do better .
A trial will convince you. Thanks

Can you supply in ikorodu.if yes please lets have your price list here.

Builders in the house pls i want to know the reason for the pvc pipes on this floor.

daviejay:
MY PROS IN THE HOUSE...PLEASE WHAT IS THE MINIMUM NUMBER OF DAYS OR HOURS I SHOULD LEAVE THE OVERSITE CONCRETE TO DRY BEFORE BLOCK SETTING? CAN I SET BLOCK TOMORROW? THANKS ALL.

Nice one bro.

Can you please enlighten me on the cost implication of this your German floor.
That is cost of digging soak away,laterite,cement,sharp sand,carpenter and form work,labor cost e.t.c.

God bless you.






I am very keen on this cos i also have a project similar to this at hand.

Am a third class civil engineering graduate.Pls i need help on which school to proceed for my PGD either in civil or its equivalent.


thanks.

daviejay:
foundation filling ongoing

Well done bro.

how much were you charge for the soakaway digging.

please i will like to know what percentage the soakway sand was able to cover in the foundation filling.

this will help me in costing mine too.

Thanks and May God continue to help you.

hotmas911:
Good morning

MORNING TO YOU TOO.

Thanks to every one for your kind contribution and suggestions.

I was told to dig soakway so that i can use the excavated sand to fill.That way the quantity and cost of buying laterite will be minimised.

BUT how long can i leave an already excavated soakaway unattended to.can it be left for a whole year.

briliantsak:
Nice one...I can help you with d cost implication.

please am waiting for you cost implication.