₦airaland Forum

engrken2:
1.3m

KINGreignn:
Baba good morning, that ES330 don go?

hastane:
awon eleyi ma nfi Ogun odun pin'lese werey ni.after all this one picture per day as if to say na locomotive engine den dey couple,the engine go still knock after two days sha ni.abi no be the same mayor wey no sabi do egr according to nrdigitech

Partnerbiz:
I disagree with freeze on this.

We are a religious country.

And this is a sensitive one. Inasmuch as it's no offence but it's likely to cause breach of peace hence should be avoided.


Make cash by selling airtime to us at juicy rates.


Also come for cheap data.


Na dem dey rush us now oo..

See over 723 testimonies from members here below.




Nkea bu nke anyi

042 Amaka.
Otu Onicha amakazi

antagonist:
looks like 2008 model, vin number says it is 2008

mayor2013:
New head gasket installed. Cylinder head back . Brand new idling sprocket installed as pointed in the picture

Okrikacity:
Why are u laughing now

nurey:
go to olx

aalangel:
Keep quiet!!! Did my post suggest that anybody should be slapped at all?? They are both at fault...the wife only shouldn't take the blame.

Why should a mother-in-law slap her daughter in law in public?

TRAY2:
It's such a beauty to behold, saw it in Lekki

aalangel:
Inasmuch as i'm not in support of the slap(s), she slapped the wife first!!

brunofarad:
Stones and bricks for both your interior and exterior building decorations.
Talk to us today at FARAD CONTRACTORS NIGERIA
0806 287 3386

radautoworks:
No mind me. It's brand new, unused and i don't even know the capacity. Na my husband talk am. I'll find out and get back t you on the specs and price. We just ordered one too many for the shop.

radautoworks:
Repairs done and being dropped back in.

Got an extra hoist for sale btw.

Gallass:
I have a 3.0L V6 engine in an INFINITI sedan.
The engine tappets are knocking loudly.
My kazeem warned that I shouldn't go and bother myself repairing it because I might end up messing things up.
He suggested that I should be adding "oil treatment" anytime I change my engine oil.
please I'll like to know if I should heed to his advice or if there is something that I can do about it. Thank you.
Gazzuzz
AutoelectNG
radautoworks
autojosh

GAZZUZZ:
250k

nwanneni:
ok bro.
Just one problem,can you wait till say the 15th of september?
Work took me out of naija so i can only be available around the 15th.
Thank you once more for showing interest.one love

phoneworks:
@diportivo I went ahead to try this. I did extensive research and at the end it paid off. I can tell you that I never regrated venturing into this. The situation I described above about the cab was so bad that the fuel consumption of the bus was too high and there is also heavy power loss despite the huge full swallow(consumption).
I fitted 1.8L mono-motronic injector with fabricated flange to match, ECU, O2 sensor, ignition transformer, loom to match, catalytic converter, coolant temperature sensor, fuel pump, cooling fan control(before now the cooling fan runs steady. Hope you know the implication) and the sweetest of all I fitted MFA INSTRUMENT CLAUSTER with its accessories. Timing correctly to get maximum power became an issue too. I needed timing light for this so I have to buy one from jiji.com. OBD2 scanner port was installed so that I can pull codes from the ECU if there is any. I bought the exact plugs recommended by the manufacturer. It is really fantastic.
I did all the job myself except welding the catalytic converter to my exhaust. I also used the opportunity to change the valve stem seal with a tool I fabricated. Before now I discovered that number 3 has been leaking oil. I rebuilt the head too.
Finally I did smoke test with smoke test equipment I got from the same person I bought timing light and OBD2 scanner port. There were no leakages. My transporter T4 LWB runs great with best fuel efficiency.

thebigkendo:
Using the above estimate, let's say approximately 300k + 35k labour + Gazzuzz mobil 1 warrantee = 330k
Aunty Radu rebuild +parts(engine oil, coolant, crankshaft, oil pump, bearing, gaskets etc) + 6month warrantee = 240k

Kazeem will probably do engine +labour +water in radiator = 180-200k with a week warrantee

330k - 240k = 90k
90k is alot of money mehn.. I will go with radautoworks mehn
300k is my confortable limit for engine life so with our assumed 250k miles on the corolla
I Still have 50k miles to go.. Which is like 2 - 3 years

Radautoworks for me..