Reference: Have been reading about this for a few weeks now. Surprised this technology has gone unoticed for the years in the works.
My reservations concern deving in filthy floods and the rubbish that can get trapped in the lattices, invariably destroying them. Surely they need very hardy materials for that part.
Or cover them up with typical side walls altogether.
sonnie10: I am not a professional builder but I like catching cruise with figures. Now if we did a decking of 17 x 17 = 289 square meters with 480 pieces of 12 mm Therefore your 11 x 9 = 99square meters Would be 99 x 480 / 289 = 165piece of 12mm. Then add about 100 pieces of 12mm needed for the beams So you are looking at 265 lengths of 12mm
The 16mm looks ok because it is for stairway and any cantilever you might have.
Nice cruise
I was thinking the beams would be catered for by the 16mm. Or are you talking of hidden beams?
sukkot: I am part of the NO TIME geng. so my ABS was malfunctioning. car will be shaking anyhow when braking or reversing. the ABS light was on too. i just locate the fuse in the fusebox and pulled it out. who ABS epp ? NO TIME. car is back to perfect now. no more shaking
Inception: Try this experiment: 1. Take your car to the highway(service lane), get up to about 100kph, then depress the brakes quickly and suddenly. While at it try steering the vehicle and see if your car will respond to steering input. Try this with another car equipped with ABS, then kindly revert here with the results. 2. On a slippery road surface, drive your car to speed, then depress the brakes quickly and suddenly. Note the braking distance. Repeat experiment with a car equipped with ABS and revert with results 3. On a dry surface, drive your car to speed, then depress the brakes quickly and suddenly. after stopping, check the condition of your front tires and observe the flat spot. Repeat with a car with ABS, and revert.
sukkot: I am part of the NO TIME geng. so my ABS was malfunctioning. car will be shaking anyhow when braking or reversing. the ABS light was on too. i just locate the fuse in the fusebox and pulled it out. who ABS epp ? NO TIME. car is back to perfect now. no more shaking
Try this experiment: 1. Take your car to the highway(service lane), get up to about 100kph, then depress the brakes quickly and suddenly. While at it try steering the vehicle and see if your car will respond to steering input. Try this with another car equipped with ABS, then kindly revert here with the results. 2. On a slippery road surface, drive your car to speed, then depress the brakes quickly and suddenly. Note the braking distance. Repeat experiment with a car equipped with ABS and revert with results 3. On a dry surface, drive your car to speed, then depress the brakes quickly and suddenly. after stopping, check the condition of your front tires observe the flat spot. Repeat with a car with ABS, and revert.