₦airaland Forum

These are the Pictures

@ ALL

Am not a regular poster on this thread like before, most of the time i prefer to call the so call Gurus on phone.
Now, i would like to share my experience with others.

Have u ever withnessed or experienced a scenerio where u were called for  installation and after u might have charged ur Client on getting to the scene, u got to know that the Client had no GENERATOR and power holding refused to release power. (And U were in desperate need of that amount u charged him).

Would u come home with ur installation tool or u will wait till PHCN release the power ?

In the past had faced many challenges like these not until a friend of my introduced me to DIGITAL SATELLITE METER/ FINDER (not common ones).

The first time i used it, i was like treated like don.

when i got to my Client house, the man told me there was no light, i said he shouldnt bother.

The second question was that should I bring out T.V i said NO!!. The only thing he got for me was ladder,  and up i went. W
ithin 5-10mins i was tru.

See the pictures below ( i believe is a must tool / equipment for an installer)

@ ALL

Am not a regular poster on this thread like before, most of the time i prefer to call the so call Gurus on phone.
Now, i would like to share my experience with others.

Have u ever withnessed or experienced a scenerio where u were called for  installation and after u might have charged ur Client on getting to the scene, u got to know that the Client had no GENERATOR and power holding refused to release power. (And U were in desperate need of that amount u charged him).

Would u come home with ur installation tool or u will wait till PHCN release the power ?

In the past had faced many challenges like these not until a friend of my introduced me to DIGITAL SATELLITE METER/ FINDER (not common ones).

The first time i used it, i was like treated like don.

when i got to my Client house, the man told me there was no light, i said he shouldnt bother.

The second question was that should I bring out T.V i said NO!!. The only thing he got for me was ladder,  and up i went. W
ithin 5-10mins i was tru.

See the pictures below ( i believe is a must tool / equipment for an installer)

@ George_D
@ Dejsam
@Badaru
@Olofofo

U would all say long time. I had been in jungle quite sometime now.
Things were partly tight there, i had to do most of of the Networking alone.

most time normally check info tru my phone without logging in.

Pls could anyone of you send me 4669 , 4669xII latest software.

kindly foward it to jayron communications@yahoo.com

Thank u so much.

@ George_D
@ Dejsam
@Badaru
@Olofofo

U would all say long time. I had been in jungle quite sometime now.
Things were partly tight there, i had to do most of of the Networking alone.

most time normally check info tru my phone without logging in.

Pls could anyone of you send me 4669xII latest software.

Thank u so much.

@ George_D

Copied that.

@ George_D

I must comment u on ur recent achievement.
As u know me, am a man with too much queations.

How much is a or (pair) of solar module

What are the logics in connecting the Modules.

@ George_D
@ Olofofo
@ Dejsam

Could u pls send me latest software for 63x and 69x.
jayroncommunications@yahoo.com

@ George_D

Hi hail o.

@ Freshp
@ twinskenny

Thank you, for your supports

@ George_D, @ Twinstaye, @ Enitan
@ Dejsam, @ Owoseg @ Bode4real
@ olofofo @ Solong1 @ Obijack
@ Baderu

Is a must for me to say thank you to the above people had just listed. You all made me what i am today.

I continue to laugh at myself, each time i remember how i disturbed George, Twintaye and Enitan.
It got to a stage, that i started calling MODERATOR on MID-NITE- CALL for installation tutorial yet he didt not desert my calls. Am highly impressed for all your supports.

Am not just a story teller but you had all changed my story. Now am local champion when it comes to satellite installation, they all know me to be "last bus stop" when it comes to SAT-INSTALLATION / TROUBLE SHOOTING.

Another thing, this made me to go to places i never dream i could meet myself (i meet people who are well connected every time, due to the way i was recommended to them)

This thread has changed my life.

Thank you all for making me to believe in God and you.

@Bode4real
@Pofolo
@Alancruise

I would soon text u the Date,venue of my introduction. Is some where in Akubo area Anifalaje junction.

@ Bode4real
Hi, i was at Ibadan yesterday somewhere at Akubo area.
Am sorry for not calling u, this was due to NURTW wahala.
I would inform u on my next visit which would be on 11th of Sept.
I would like u to be there on that day. You know what that could be, expect more yarn on phone.

Also, you could get me list of Members living in Ibadan, i would like them to be there.

@ All

I miss u all.

@pofolo
Thank u bros.

@ George_D
@Bode4real
@Dejsam
@Badaru

Thank u all for ur concern during my tribulation time. I rusmed office today, a brief welcome party was held for me. They all missed me that was their confession but to me i missed all of u in the house.

@Dejsam
@Badaru

I will call both of u later in the day. I know without doubt had missed a lot. At present my table is filled with work, once i digest it, i shall call.

No wahala,

@ King George
@ Bode4real

Hi guys am sorry for not been active on the thread, I had a slight accident am still recovering from it i would bounce back soon.

@ Bode4real

Am sorry for not informin u that i wouldnt be chanced. I had a lot of Installation job at hand so i changed my mind, not to go again.

That does not mean i will not show up, i may come with Madam.

See ya.

@Bode4real

I will make it a must to see u.

@ Bode4real

Well if time permit me i might call u, when i arrive at SOKA bus-stop.

@ Bode4real

Copied that, now u are welcome back to world of 69x.

Bode where excertly do u stay in Ibadan? cos i would be in Ibadan on Sunday.

@ Bode4real

Thanks for the call, i beleive my zain no had been re edited to 11 GSM digit 080278, not 080272.

I bet u, follow the steps and there u would be.

Jayron comms.

@SAMMU
You dont need to worry urself on that. This happened to me weeks back and it made me to dismantle a whole 65cm dish.

This problem is common to 4663x, what u need to do is simple
1. Go to installation
2. Select W6
3. Input ur frequencies and symbol rate
4. Press o.k

OTHER WAY ROUND

u can at thesame time scroll through all other sat names, then pick one with full strenght ( the the topmost bar) not signal quality. You can key in your tps.

Try that and let me know.

@
George_D

Hi george, i received my consignment yesterday from D.J.S. It was working fine.

@ ALL & STRONG DECODERS BUYERS.

Sequel to what i posted the other time, on how to determine FAKE STRONG DECODERS, i should have posted everything you ought to know before u make purchase.

Majority of these FAKE DECODER IMPORTERS have access to this thread and they monitor all our posts also, to know "if the cat is let out of the bag" by some of us who know the original decoders.

Am not keeping it to myself, if i post it they might see it and change tacties. I mean they might tell the manufacturer in China to bulid excertly what i decribed cos they know well that, u people will be looking for what i describe on this thread.

You may call me if u want to know. (You must be a registerd member of this thread)
[b]08027867202, 01 9520261

@ All backyard applicants

There are lots of qualities and character we expect from u guys.
This group is not meant for all but for some selected few.

@ seunoluomo
Thank u, Multi TV is still on.

It is only CRTV, that was partially down before i left home on monday.
Well a friend of my called me on thesame issue, when i got there the fisrst thing i checked was his freq computation later dish setting. Both were okay i then moven UP to the DISH and checked the LNB. They were all okay i then concluded that the dish had been shifted from its position. The track began and it was fine (but with a bit of skewing)

You can try that.

@ All

Pls before u buy 4663X or 9X call me to hint u on how to know the original. Prevention is better than cure.

@ George_D

A happy am back again, how are u doing.

@ Pitodenz

Am still awaiting ur reply.

@ Pitodenz

How are u doing, thank u for the last post. I know ur hands are tight, that could have been one of the reasons u did not continue from where u stopped on networking signals from Recievers to rooms.

Okay what do i need to network signal from on decoder to 4 - 5 rooms. I mean they would all share one channel each.

Take yeah.

@ pitodenz

Good day, thank u for ur contributions so far. I would like to ask u questions on how and what do i need to net work 62 rooms to receivers.

If u could even list all i need out. You can foward it to my box jayroncommunications@yahoo.com

Thank so much.

@ All

I was a bit confused when i thought everything has ended just like that. Thank God that we are still hooked together.

@ Adewest

I dey always feel u oh, any how e go be i go soon call u.