₦airaland Forum

michlins:
Sample versus production

As you can see,I will always deliver

Clean wrought ✔️

duro4chang:
HISTORICAL OF IGBEIN
MY SOURCE
The history of Igbein is dated back to 1829, it was basically based on the dictates of an 'Ifa Oracle which told the Egba at the time that they should leave the union of all the Yoruba then settled at 'Odo-Ona' Ibadan.

The Igbeins, just like other Egba brothers migrated from Ile- Ife that is Ife-Oodaye (ni bi ti oju gbe timo) i.e. where the day starts. Their migration was necessitated by the internal conflict, which engendered their dispersion from their original settlement. While at Ife-Oodaye, Ojoru was the Sectional Head of Igbein. The name Igbein itself came from the Ogboni conclave.

During Ogboni Procession, the order is that the most senior rank came last in any procession and Ojoru was the most senior in rank. Due to Ojoru's (Igbein's progenitor) position during Ogboni procession, the igbeins were referred to as Egba Igbeyin (those at the back). Their migration took them to many places including Old Oyo and Ibadan. However, it was from Ibadan under the leadership of Lamodi, an Igbein warrior that procession to Abeokuta began. Lamodi Oso Igbein, however handed the Egba people to Sodeke when they got to Odo-Ona, in continuation of their journey to Abeokuta.

When the Egba arrived at the Egba forest, the Igbein people settled at a place known as Odo-Igbein near Eriki village. Igbein installed their first Oba at this settlement place.The king used to be called OjoruJoba because Ojoru was the progenitor of Igbein people. Laguna was the first Oba. The word "Ojoru Joba' means the descendant of the progenitor now became a king. Since then, all kings of Igbein are known as Omo Ojoru Joba' (i.e. son of Ojoru became a king). Any male Igbein indigene was referred to as Oso' while any female indigene was also referred to as 'Ewusu' and they were all referred to as Omo Ojorus' (the descendants of Ojorus). Later the Igbein people moved from Odo-Igbein to another settlement place known as Eboto near Osola village.
COPIED

Thanks for sharing 🙏

yungmin:
Good evening all,
A quick question: is a staircase flight of 900mm width okay for a residential building or it is too small?

If it’s straight flight staircase, 900mm is the minimum. If it’s double winder or other types of staircase, you want it a little wider to accommodate the handrail and other staircase furnitures.

If it’s me I’d do 1000 - 1050mm on a straight flight staircase.

rotecch77:
Yes it’s
Thanks sir

Nice one!

225 x 450mm Columns ✔️

It looks like you’re using 20mm bars. E ku ise!

FutureFocus:
Wash your car with ease
Wet your gardens with ease

Came with sprinkler for garden

25 meters long

15k only

Location is Lekki
Contact details on my profile

I’m interested.

SurveyorGeo:
It is now possible in Lagos State

That one that they’ll be telling you server is not working. 🌚

For over 6 weeks, I’ve been going to the Office of The State’s Surveyor General (OSSG) to track the status of a file submitted several months ago. We’ve been moving from one story to the other!

Tracking online should be done in such a way that man in South Barrington, Chicago can track the status of his files in Alausa without meeting one Mr. ABC to help him (like it’s currently being done)

gbadexy:
What quantity of each.

I’d revert. I’m currently busy with some paperworks now.

sonnie10:
You can’t enter sealed premises/ property except you are ready to go to jail.
It is tantamount to tampering with evidence.

Correct! 💯

Olumighty123:
Bros, you don witness almost everything for this life props delivered and site sealed, then return the rented materials nah, it's as simple as that but then again, what do I know 🤷‍♀️

When a site is sealed, you can’t gain access into the site. That’s the standard!
If you do, you have broken the government seal and there are consequences for this.

Pictures of the site when sealed has been taken and documented so any changes/modifications/alterations/unauthorized activities that happen on the site as at the time it was sealed is illegal and you’d be penalized for it.

Amastermovic:
Net depends on quality=4nos assume*18000=72,000

Quality nets are very expensive now.

I got 4m x 50m (85% shade ) debris net for N80k last week.

2m x 40m currently go for N35k

Amastermovic:
imagine after installing the site was sealed up or funding issues who cater for the cost

You’re very correct!

For me I just go for fairly used props from other construction companies.

I’ve witnessed a situation where a site was sealed the same day steel scaffolds we’re delivered.
It wasn’t reopened until 6 months later.

It caused a huge setback for the project.


========

In my ongoing project, I’ve spent over N2m on scaffold rental.
I recently ask the contractor to come and remove the scaffold when I got free one to use from another project belonging to a friend of my client who have invested heavily in scaffolds.

folmus:
So how much does it take to buy one?

It’s a while I did this though but fairly used prop of 3m won’t cost more than N10k - N12k

rotecch77:
I can’t afford to buy now may be later for biz purposes shaaa … Rentage.

I do pity client this days oo
Money money money.
My current commercial project DOCUMENTS ONLY … approval etc my cleint spend about 7m haaa God… whooping sum of 7m I started quarreling with my self as if I’m the one paid the money.
By next week now I will pay another 500k for both Materials testing and safety guys.

Pls and pls any govt official here about building kindly tell commissioner and governor that document money is TOO MUCH in Lagos state
Kilode naa

Over N15m here 🤐

3ice9ce:
So, you must visit site before you must know how much materials and labour for 1sqm of POP costs?

The cost of installing POP ceiling in a room with standard headroom can never be the same as the cost of fixing POP in a double volume room.

You definitely need to visit the site to know what you’re up against.

Or do you think the cost will be the same??

When you start assuming there’s a fixed cost for doing everything in a project, this is how many people get stucked in their project.

At the level shown in the picture below, you’d spend more on:

- labour cost
- materials (as there’ll be more wastage at that height)
- scaffolding/props

Someone is just planning to pay more than 500k to rent props just for one month on a project.

These are some of the reasons you have to get to site to determine your actual build cost.

rotecch77:
Wow
The man gave me N170 per one In a day and I need about 100pcs for duration Of 30day.
I’m ok with the it … the strength for me is the koko

510k / month

Omo! 🌚

There’s a guy who offered me 100 Naira per day in Ajah. I chose to buy 30 pcs instead

rotecch77:
I used
*Builder square method
*3-4-5 method
* digital instrument

3-1 method to make sure we are in right direction

Good job!

However you still need an equipment that can see through walls/studs when you’re setting out a n awkward shaped standalone building that is emerging from an existing building.

You have to:
- cut through walls
- cut through floors
- cut through slabs
- and still ensure the structure aligns and come out clean.

It’s the 3rd time that the new commissioner for physical planning has visited my project since he assume office few weeks ago.

The question many people were asking was how did we achieve that project

Larwin:
The battery you introduced is the input, your battery ll need an inverter which is another input, then you ll have to deal with starting current. Why going through all these when you can have uninterrupted water supply for atleast 12 hrs without any input except day time.

I did the setup you’re talking about in 2016. It worked well but we had to introduce battery/inverter into the setup at a later time.

https://www.nairaland.com/2841505/nexthome-2016-construction-daily-updates/1#42268860

Larwin:
The battery you introduced is the input, your battery ll need an inverter which is another input, then you ll have to deal with starting current. Why going through all these when you can have uninterrupted water supply for atleast 12 hrs without any input except day time.

I have a setup by Shurflo that uses battery and charge controller. No inverter.

Good morning!

Nathan2016:
Location?

Whatapp: 0 9 0 6 0 0 8 3 5 4 8

Lagos. I’ll be in your dm

Nathan2016:
Taeillo SOFA - 160k

Car Jack/C CAUTION/FIRE EXTINGUISHER - 8K

HUMIDIFIER - 4K

HUMIDIFIER 2 - 8K


LOCATION: AGO PALACE WAY,


ALL negotiable

Location: Ago palace way, Lagos State

I need the humidifier.

Unfortunately, many people don’t have access to limestone quarry wastes.

It remain the best filling material I’ve ever used. It is self compacting fill material and can be used as a stabilizer in an expansive soil.

dominic17:
What of natural compaction,how many times can fall on it before it will be fully compacted ?

It is very hard to tell the number of days as it depends on different variables BUT your foundation is fully compacted when:

1. Roots can no longer penetrate into your ground. You’ll start seeing roots spreading on the soil instead of going into the soil.

2. Your soil becomes hard that you’d struggle to drive a shovel through it.

3. You’d start seeing water puddling or running on the sand filled area of your land instead of sinking.

The result you’d get depends on how long you can leave the foundation to naturally compact during a major rainy season but if you’re dealing with sharp sand confined to a space and flooded with water, two or three major rain should do the job.

Regardless of whatever you do, sharp sand will NEVER compact into a hard material like a clay.

Reeefe:
For full context. Material is sharp sand, and land is tabled

Ok.

How long it’ll take for your sharp sand to attain full compaction on a tabled land now depend largely on:

1. The type of compactor being used and its weight
2. The moisture content present in your fill material *3. The thickness of the layer you’re compacting at a time.

** Many of us have sinned on the 3rd part. Everyone want to quickly get the filling into the foundation and run a compactor over it.

Larwin:
With Dc pumps, you don't have to worry about starting currents as your pump is connected directly to the panels and it can only work during daytime or sun time.

If you introduce a battery into the mix, you can have water round the clock without requiring any input.

Reeefe:
What is the minimum amount of time it takes for soil to compact in a foundation

The answer to this is site and the type of fill materials being used specific!

It’ll take longer time for a foundation in a sloping site to compact than it’ll take for a foundation on a table land.

Charisdesigns:
Owing that your ground slab is sitting on a well compacted fill and hardcore we are not supposed to experience any form of deflection.

Hence it shouldn’t act as a suspended slab, and as such such not be reinforced as one.

Two things are important here.

1. The fill material
2. The area you’re building. Is it a dry land, a waterlogged site, a land with high water table or a swampy lands?

It’s after this you can know how and whether you can 100% remove the air voids present in the fill through artificial or mechanical compaction or whether to leave the site for some months for the soil to compact naturally from a good source like rain.

The only reason why you’d want to design your slab on fill to act like a suspended slab is because you can only control what happens in your plot. You cannot 100% control what happens around you.

- What if the owners of your neighboring plots didn’t build in the next 5 years?


=======

A client of mine decided not to build in a block in Adiva because there are no other person building around him in the block where his land is and the block is heavily flooded.

There are no drainage yet in the block so he’s going to be dealing with something far bigger than him if he chose to go ahead with the construction

walexProjects:
You're not getting it.

Why do I need to have a put on my pump when my tanks are already at an elevated level?
Even with a DC pump,you will still need starting current to start your pump.
Which is very high in DC motors.

But the solution been proposed has remove the need to constantly put on your pumps when water is needed.

I get your point.

I’m saying if energy consumption is the problem, then a DC pump can fix it.

Working with an average of 100 litres of water a person need per day, I don’t think a building with 30 people will need more than 3,000 litres of water per day and 90,000 litres per month.

Even a 12v DC pump delivering 8 litres per minute will do 3,000 litres of water within 6 hours.

segcymoor:
Well, I didn't rule out the importance of using good sharp sand compacting well especially in raft foundation...but then it's expected for ground floor slab to stand well even if filling collapse in the future hence necessity for well reinforced ground slab just like suspended slab


I once raised alarm sometimes last year a builder here.( Which is even chatting on this page now ) did a foundation even very close to where we are working now with just wire mesh



Our slogan: we do structures right... it's not mere saying

It's a indeed [ A watchword!

Meanwhile, casting of ground slab in progress

I hope some people are paying attention to the bolded.

Build your slab on fill like it is a suspended slab.

walexProjects:
If it's the other way i.e down feed to up - feed ,that means you need to constantly put on your pumps using electricity which increases the cost of your household electricity.

I think this is something a high pressure dc pump can fix and interestingly they’re more efficient than the energy guzzling AC pumps.

I have DC pump and I’ve never had to worry about energy consumption.

Aforxzy:
In areas like Lekki and environs, it is unusual to see this type of filling because the whole area has been sandfilled with sharp sand which is also readily available in large quantities there.

Though the type of sharp sands used in Lekki and other non-cohesive fill materials are less liable to shrinkage, we must understand they are more liable to being flushed out by water flow when it continues to percolate through a foundation.
So we cannot overlook the influence of water content on different types of soil when choosing fill materials in different sites especially in waterlogged areas.

When laying a foundation on disturbed soil or an old building, you have to do more than just skimming the surface.

Ongoing: SCH Haus by NextHome | Preparing the site


https://www.youtube.com/watch?v=xy_WxyQHeyg

rotecch77:
O waa Alright.
My ongoing gigantic project need it. Most especially the Hall section

It’s the best way to build BUT then 🌚

Make I no talk.

I’ve had to investigate a foundation in Lekki area before and it was shocking to see that the soil used to fill the foundation has subside under the slab in less than 2 years after the project. I remember I share the video here on this topic .

Reason: Poor Compaction

We too dey rush our builds in these days of Buy and Build in one month. We hardly give time for natural compaction.