₦airaland Forum

tetralogyfallot:
7S32P,
VOLTAGE: 25.9V
CAPACITY : 83.2Ah, 2.155kWh
PIECES: 224 SAMSUNG CELLS

How much for this pack?

noobody:
Omo,

Make I change my mind then, I wanted to go get one now,

Thank God I saw this post,

That statement is subject to location as it is with other networks, if the network is okay in your vicinity the speed will surely be okay for your use, one of my devices is at a location with no 5G and it works well, the second is in a location where i get 1-2 bars of 5G and it works super okay. So i would advise you check before you buy and not limit yourself to comments by other people.

BadMaster:
Took me a while back then, but i figured it out. The Nokia receiver unit's bluetooth needs to be turned on, as the Nokia Wireless app connects to it via bluetooth, and by default, the receiver unit's bluetooth is off.

So, while connected to the Nokia router, go to 192.168.1.1 and log into the interface, then go to the General tab and turn on the bluetooth.

By the way, the password of the interface can be found on the sticker in the pack inside the receiver unit carton.

Thanks boss for the detailed response, you just outlined my exact experience too. I went to the friend's place and together we were able to decipher it just as you have said. The router and receiver are working okay and network reception has greatly increased, i also noticed that the router has a self-heal function and can restart itself after network fluctuations unlike the X25PRO that would require a manual reboot to get back on track.
I'm really tempted to get the nokia router and swap out my X25PRO, but waiting for my friend's review after a month.
Thanks once again.

faceland:
I heard the rubbish routers needs electricity/charges. t would ne hard finding someone who use it to swap SIM card (where I live).

Thanks for the reply/info.

As per electricity needs yes it's actually true for the ODU devices but that too can be tweaked, my friend attached a router powerbank to the beacon 2 wifi distributor and attached the fastmile receiver to a small UPS, energy consumption is very low, so the setup takes him for hours on a full charge. For swapping sims, you only need a star screwdriver to open the compartment and switch ur sims, if you do the swapping fairly regularly then you can leave the cover off, the sim holder slide in and out quite easily.
The other routers have follow come battery banks and sims can be swapped easily. Cheers

The plan is sim based and only available on routers not even mifis. So, you either get a router with the attached sim, which you can remove and insert in your phone, or you buy the sim off someone who has an airtel router already.

FarEl18:
Okay Thanks. I

Actually, it comes in 2 units (at least mine, I can see some people posting a newer one that is just one unit). One is the receiver and the other is the router. You are supposed to place the receiver close to a window and it is what holds the Airtel sim. Then you connect the receiver to the router via LAN/Ethernet which broadcasts the WiFi signal.

Fyi, I sometimes connect from the receiver directly to my laptop using LAN.

How was ur first installation done, a friend bought one and is having problems connecting to the Nokia wireless app, always failing.

Obnoxious2001:
When do you want it done. It should cost around 20k to add that feature to the inverter.

Can you share steps and resources to achieve this?

Please you guys should express some decorum. Remember the internet never forgets.... Cheers

Fuyebaba:
Can it be unlocked to allow other network to provide the internet connection?

For now no.

officialfestus:
12v 200ah.

This looks great. Well done

officialfestus:
Building was really quick, at thanks to my amazing spot welder I bought from aliexpress.
It has been performing wonder, because I plug and use. Because the battery it came with is not strong.

Please share link to the specific spot welder

hartum:
Please, can you refer the person who unlocked your ZLT X25 not Pro? Thanks

What I have is the zlt x25pro

Dam5reey1:
I couldn't find my Wi-Fi USB external dongle adapter; I could have tested if that can work as WIFI access, if connected.

I'll be awaiting our findings. Cheers

BadMaster:
Locked to Airtel network. Although it has a LAN port, but not WAN.

The LAN is only a LAN Out and cannot receive input either by LAN or WiFi, so without the Airtel SIM the box is practically useless in my opinion.

Trippledots:
I think he is fine with the battery connection since they aren't Lead acid batteries.

This assumption is wrong, it works doesn't make it optimal, but that's a subject for another day. Cheers

SEOSpecialist:
Experts in the house, kindly proffer your advice concerning my inverter setup.

I have a 3.5kva SMK Inverter with two pieces of Cworth Energy 2.5kw Lithium 24V batteries (as seen below) and four 380w PV panels. On Wednesday afternoon, the inverter let out two loud sparks and started displaying error code 09 (this would be the second time within three months). A technician suggested that the inverter may not be compatible with the lithium batteries and suggested I replace it with a 3kva Felicity
brand.

Does anyone have an idea on which inverter brand will be most compatible with the batteries?

Thank you.

Alternative inverter brand will be based on your budget, so please share the amount you're comfortable spending on a new inverter first.

Secondly, get Ur installer to separate those battery cables, let the positive be on one battery and the negative on the other, this will aid even current draw between the 2 batteries connected in parallel, as it stands, battery 1 is taking all the hit and will charge and discharge faster, while battery 2 is in limbo.
If you have a high influx of current higher than the BMS capacity, then Ur battery BMS may clip the current to save Ur battery and that might be part of your problem.
Preferably, get a busbar, connect both batteries to the busbar independently with equal length cables, then connect to your inverter from the busbar, that would be the ideal approach and will aid balance out Ur batteries too.
Just my 2kobo.......

AdexAyanfe:
Please what's wrong with my setup. I've presently assembled 3S3P li-ion battery( while waiting for more batteries) with 3S 40A bms, with the cell all balanced. But anytime its fully charged to 12.6v (I'm only charging solar for now), the voltage then start fluctuating at 13.8v, 13.9v, 14.1v.
But when I checked the actual battery voltage (bypassing the bms) I noticed charging has been cut off and it was around 12.55v then.

But anytime it starts fluctuating due to charging disconnect, once I put a reasonable load on it, it adjust itself and displays 12.6v.

Please what could be the issue, I've tested 2 3S 40A bms, it's the same.

Could it be my solar charge controller

@dollarnaira @penuelseun @officialfestus @everyone

Your system is working as it should based on parameters of both the charge controller and the BMS, you didn't (can't) adjust the parameters on Ur CC as it is set for lead acid battery at 14.4v, while Ur BMS is locked at 12.6v (which is the verified safe working voltage for 3s lithium ion battery packs).
So while the CC tries to get to 14.4v the BMS clips it at 12.6v the reason the reading after the BMS is 12.55v which is less than 12.6v.
The increase in voltage when load is applied is that the inverter is pulling direct from the CC and since it can do higher than 12.6v, it would naturally increase, and the fluctuations are due to the solar fluctuation due to cloud covers.
For optimal use, get a CC with adjustable settings so you can set Ur voltage at 12.6v max and stop clipping on Ur BMS or else you might fry Ur BMS and in turn Ur CC. Cheers

Betnomore:
Its the 20mbps unlimited plan. Ive used 1tb so far this month and the data has throttled yesterday

How did you check your data usage. Could you please enlighten me?

EduTechTainMent:
Seems airtel have re-introduced the 20k unlimited subscription. Got a message from them asking me to subscribe to the 20k unlimited and followed the link. Lo and behold, the 20k unlimited option is listed there. Check to confirm

Thanks boss for the update, someone told me over the weekend and I confirmed it to be true. Good one for Airtel cos so many people have dropped their lines, me inclusive.

EduTechTainMent:
How did you go about attempting to subscribe? I can still see 25k subscription here.

However an airtel agent told me weeks back that there are rumors from the airtel company that the 20k plan will be discontinued.

It's a bad move especially cos most ppl opted for Airtel cos of the relatively affordable 20k plan.

As seen in the screenshot, the 25k is for new customers only and will not be visible on the payment page, try it and revert.
As U rightly said the increment and subsequent removal of the 20k subscription is a wrong move in all remifications

Dam5reey:
yes, it's a free device, once you pay for the 20MBps, its now 25k for new users.

Tried to subscribe to the 20MBps plan and the plan is no longer available. One now has to do the 35k 40MBps plan. Airtel no try abeg...

SolarEngr:
155. 27/04/24
Installation of 1.5KVA Solar Powered Inverter System at University of Ilesha, Ilesha , Osun state.

How much does this setup cost?

mctfopt:
The post you quoted has the first line as 1KWH

Thanks, just realised my error.

projectandpages:
Hi,

Powerbox Pro(version2):
•1kWh lithium ion storage 🔋
• 2 years warranty
• 10 years life cycle

This 1kW power system can power the following:
1. Energy saver refrigerator,
2. ⁠All home indoor LED light
3. ⁠Wall sockets
4. ⁠Blender
5. ⁠Tv sets

Package comes with:
1. Two 150W each solar panels
2. ⁠10 yard connecting cable

N540,000

3. Charger (optional) - NGN70,000

[url]powerbox.com.ng[/url]

What's the attached battery capacity of the setup? You only provided the inverter output capacity.