₦airaland Forum

Call

Call

A white lie. Just because they are loosing

Akin4sure:
Good evening, pls I need a good solar installer and supply that lives or work around ibeju lekki, I need to know how much will take me to power some things in my house. Very urgent just Whatsapp me on 09069193297

Why can't I list the equipment here and I wi do the load calculation for you do you will know the capacity/rating of the solar or inverter to install.

rotecch77:
What you need is automatic pressure pump, with this the reservoir tank will be in the ground floor then the pump will take water from there to distribute into the various part of the building BUT you will needs 24hrs light” No light No water”

Italian water heater is available

10 Ltrs 27k
15 ltrs 29k

Boss confirm if there is regular power supply in his area .

More pictures.

Thanks Architect.

Thanks for your patronage Mr. Sesan

LastWeek1:
Hello guys ,

What’s market price for house electrical wires?
1.5mm
2.5 mm
4mm
6mm
10 mm
16 mm
Full coppers

And who can supply me this week?
Regards

We can deliver directly to your doorstep

Whatsapp me 08033643191

You can also visit our thread.

https://www.nairaland.com/2326721/nigerchin-kabelmetal-coleman-cables/25

rajput4real93:
Thanks oga Topsy

You are welcome sir

rajput4real93:
Thanks oga Topsy. My other question: What is the effect of using 4mm single core wire for water heater and cooker unit?

By IEE installation standard , the normal cable for water heater and AC is 4mm and cooker is 6mm because they are all heating element .BUT 4mm can be used for cooker unit in Nigeria if you are using original cables. The current rating of original Nigeria cable can withstand the load.

.

rajput4real93:
What can you say about eaton distribution board? Is it as good as harvells? Thanks

Eaton distribution board is also the same as MEM. original MEM is as good as ABB and also quite expensive

Call us today..

More pictures

Am creating this thread to show case our conduit and surface system of piping.

Feel free to comment ask question, Below are some steps for surface slab piping

Laying of Lighting Pipes around a Beam
• Use of blue line to determine the route up to the edge of the beam
• Vertically place a plumb to transfer the line to the base of the beam
• Horizontally place the plumb at the base of the beam to transfer the line to the other side of the beam
• Then vertically place a plumb at the other side to transfer the line to the base of the beam.
• Blue line is use to transfer the line to other lighting point locations on a straight line
• Transfer the measurements to the pipes
• The vertical length of the beam gives the bending radius of the pipes
• Use the bending spring to achieve the bending radius
• Fixing of the bent pipes around the beam
• The pipes are linked together with couplers
• Adaptable boxes to be used where many pipes are crossing each other
• Linking of pipes to distribution boards.


Contact us today for your Electrical Mechanical Design and Installation

Check out our thread

Distribution boards
https://www.nairaland.com/2668061/abb-distibution-board-schneider-distribution/6

MEP installation
https://www.nairaland.com/1233943/contact-us-electrical-mechanical-plumbing/25

Cables
https://www.nairaland.com/2326721/nigerchin-kabelmetal-coleman-cables/23

Muyi002:
Please I am not intending to do inverter or Solar.

Water heater - 2
Proposed A/C is 1

You can put the addition wires for inverter separately. You never can tell what the future holds.

Thanks for visiting this thread

More pictures

Sent Osun state last week

Muyi002:
Oga Topsy23,

Well done.

Please I need your enlightenment on the requirements as it relates to wire cables for a 4 bedroom apartment and the kind of DB to use.

Please assist with the requirement. My plan is attached.

I dont mind if you can add the current prices of the wires

Ok. Do you plan to ins inverter or solar so that I will factor it to the quote.

And also number of AC and water heater .

Thanks

We can also complete the design with MEP (Mechanical Electrical and Piping) design and installation

You can visit our thread

MEP installation
https://www.nairaland.com/1233943/contact-us-electrical-mechanical-plumbing/25

Happy weekend

Let's handle your project

Good morning sir, the management of Nigerchin wires and cables said their will be a price increase from Monday the 28th of September 2020.
Please take note.

Contact us today for your Electrical Mechanical Design and Installation

Check out our thread

Distribution boards
https://www.nairaland.com/2668061/abb-distibution-board-schneider-distribution/6

MEP installation
https://www.nairaland.com/1233943/contact-us-electrical-mechanical-plumbing/25

Cables
https://www.nairaland.com/2326721/nigerchin-kabelmetal-coleman-cables/23.

Contact us today for your Electrical Mechanical Design and Installation

Check out our thread

Distribution boards
https://www.nairaland.com/2668061/abb-distibution-board-schneider-distribution/6

MEP installation
https://www.nairaland.com/1233943/contact-us-electrical-mechanical-plumbing/25

Cables
https://www.nairaland.com/2326721/nigerchin-kabelmetal-coleman-cables/23

Thank God for today

Contact us today for your Electrical Mechanical Design and Installation

Check out our thread

Distribution boards
https://www.nairaland.com/2668061/abb-distibution-board-schneider-distribution/6

MEP installation
https://www.nairaland.com/1233943/contact-us-electrical-mechanical-plumbing/25

Cables
https://www.nairaland.com/2326721/nigerchin-kabelmetal-coleman-cables/23

Good day sir

Call us today

Nice week ahead

Thanks for your patronage.

Our surface pipe work

twinskenny:
This type of deck is not that common... I want to know if it’s more expensive to do or the technical how?

Saw it at a client site

Yes not common. That's what they refer to as clay pot. I have done several of this type in the past