₦airaland Forum

Happy Sunday to you all....

Call us

Call us today

HealthCas:
Hello house,
Please is the choice of nigeria cable OK for wiring (1.5mm)?
Thanks

1'5mm is good for wiring and normally use for lighting.

These cables to be sent to Ikere Ekiti this week.

Thanks for your patronage

Ojolfc:
Pls I want know the price of a cable that used to connect electricity from pole to house.
I think that is big cable showing on that picture.
Thanks

That cable is reclin and not armored cable. The size of your building will determine the size of cable you are buying/installing

Good morning

Ojolfc:
Good morning to you all,
Pls I need prices of Cable wires. ( connection wire from pole to build).
Thanks.

WhatsApp me on 08033643191.

You can also visit our thread:

https://www.nairaland.com/2326721/nigerchin-kabelmetal-coleman-cables/23

Thanks

SurveyorGeo:
Good Afternoon My Ogas, please what is the meaning of "Kobo Kobo Project"?. Thanks

Lolzzzzzz

Let's give you quality job

Lovely Sunday to you all

Call us ... Happy weekend

elijah101:
I need a very good electrician around gwarinpa area abuja .. Urgent .. Thank you House

What the nature of the job

Stair case light conduit and back boxes installation.

You can only get the best from us.

Good morning

DEGREE2466:
Can someone please advise me if this design is good.

Floor plan would be require. The 3D is very nice

Call us today

Call us today

On-going project

KolaShangOne:
Hmmmmm...

Although anything is possible.. BUT

1. Did you n consider roofing? It will take almost 850k at the cheapest with aluminium.

Don't tell me you want to use Pan (zinc) that will get rusted in few years.

2. What's your estimate for blockwork? Let's assume 2200 blocks? That is about 400,000 naira. If you set 60 blocks (max) per bag, you will need 100,000. Labour cost about 120,000.

3. Gravel isn't too cheap too. Gravel for blinding, for lintels.. Laterite too...

4. Even if there is no German floor, you will still do flooring.

4. You'll also need about 50 tons of sand to get to roof level too..

5. How much would windows be? Even sliding windows will cost about 350,000

6. Plastering cost?

7. PVC ceiling cost?

8. Tiles? Even if you use Nigerian tiles, you will spend up to 400k.

The question is.. can 3million build a 3 bedroom? Maybe.
Can it give an average 3 bedroom? I'm not sold.

3M will go far but ...

femidbuilder:
Mechanical Design is available and decking pipes are installed

Ok

raymondFirstborn:
I have been in contact with ibibioson , who is a client in diaspora.
I prepared the BOQ of the said project. From my investigation so far, HSL BROKER, is not in any isolation center. He has absconded with my clients N3m and is using COVID19 to buy time.
We have told him to provide the location of the Isolation center to verify his claim. But he is yet to respond.
It's been a month now, stories upon stories.

Very sad

LastWeek1:
Hi house. Installing of Heat Extractor (Hood Range) to the kitchen,Is Boring hole to the wall necessary or not; and which one of better?

Regards

Boring hole is a must because the heat should be extracted out. You need to pipe it out using 75mm PVC pipe.

Happy Sunday to you all

Happy Sunday to you all.
Don't forget to call us for your original cable

Good morning

Happy new month to you all

Happy Salah to all our Muslim brothers and sisters

Happy Salah to all our Muslim brothers and sisters

Thenext:
Please I need your input on this plan. Anything to change? Please kindly criticize.

It's a nice plan. We can give you Electrical and mechanical design . You can reach us 08033643191.

You can also visit our thread

https://www.nairaland.com/1804476/complete-package-design-drawing-mechanical/3

Thanks

Call

Thanks for your patronage

Takoro13:
I need someone that can handle borehole for me in osun state here. a group request for it

call me 2ru 08066692four0one

Call this number +234 802 326 7670