trust101: The cost breakdown should be ready by next week

Prayer :#10,000

Cleaning of land : #20,000

Food for prayer #8,000

Architectural drawing @ #35,000

Omo onile (Area boys): #40,000

Omo onile family #200,000

Pegging :#5,250

water #1200x 15 = #18,000

water #1500x 1 = #1500

Digging of foundation cant remember: #40,000 or less.

Supervision of foundation digging/Architect drawing re-measuring of building @#16,000

Granite 30 tons: #130,000

Granite 34 tons: #132,000 + #3000 Omo onile =#135,000

Sharp Sand 155 tons:#316,000

Cement 120 bags: #216,000

packing of cement with transportation :#15,000

cement 50 bags @ #2070x50= #103,500

Bricklayer work from foundation/german floor/blocks setting/lintel/level =#470,000.

Carpenter workmanship from foundation/german floor/lintel/level= #50,000

Iron rod 12mm 18.4lengths,rings and binding wire for pillar and casket for foundation : #36,800

Broken blocks for filling of hole before german floor with labor:#6000

Welder workmanship form foundation/lintel to 25 pillars and 23 caskets for the pillars:#25,000

Iron rod 12mm 32.5lengths for 25 pillars #1600x 32.5 = #52,000

lintel iron rod 12mm,9"rings,wire #147,000

filling sand 10 tons @ #8500 x 26 =#221,000 + soak-away sand + 10 tons on my land.

packing of filling sand #1500 x 26 = #39000

Digging of soak-away #45,000

packing of soak-away filling sand #10,000

foundation 9" blocks #150 x 1500 = #225,000

Plank 1X12 @ #740 x 50 =#37,000 + transportation #3,000 = #40,000

Plank 1X12 @ #800 x 50 =#40,000 + transportation #5,000 = #45,000

Rama of filling sand before german floor #10,000.

Building blocks to lintel 9"#150 x 2700 = #405,000

Block setting to level 9" @ #170 x 1400 = #238,000

Water @ #1500x 8 = #12,000

Big soak-away 9" blocks @ #170x 300 = #51,000

Small soak-away 6" block @130x 70= #9100

Cement with transportation @ #2070x 8= #16,560

Plaster sand 10 tons @ #16,000

Bricklayer/Carpenter/welder #24,000/#7,000/#6,000 = #32000

Pillars designed 5 workmanship @ #40,000 (i bought cement)

Cement for pillars design @ #2070x 20 =#41,400

Wood 2x3x12 @ #350x 30 = #10,500

Tip for the bricklayer boys #15,000

Tip for carpenter boys #6,000

Electrical pipe 45,000

Electrician workmanship for laying the pipes #25,000

Transportation to the site @#50,000

Total cost:#3,743,610




Roof gutter cost breakdown,


Carpenter #70,000

Wood 2x3x12 @ #290 x 80 = #23,200

Nails #10,000

Granite 15tons @ #60,000

Plank 1x12x12 @ 740 x 80 = #59,200

Plank 1x12x12 @ 740 x 20 = #14,800

Cutting to sizes:2,4,6inch #9000 + the design @60x150 #9000 = #18,000.

Cutting 5 to sizes 1 and 2inch to 35 pieces @#50 = #1750

plywood 12 @ #1,700 = #20,400

Transportation #17,000

Welder #65,000

Iron rod 12mm 3.5feet x 532 = 46.55lengths@ #1750 per length = #81,462

Iron rod 12mm for beam 36lengths@ #1750 per length = #63,000

Iron rod 10mm 33lengths@ #1350 = #44,550

Drainage Pipe @#5000

Trans portion to site:#20,000

Cement @2000 X 54 = #108,000

Water @1500 X 5 = #7,500

Food for laborer @ #10,000

Casting of roof gutter laborer #60,000

Plastering the inside of the roof gutter cement 15 bags @#2,000 = #30,000

Bricklayer plastering inside of roof gutter @35,000

Water @1500 X 2 = #3,000

Plaster sand 10 tons @#16,000

sharp sand 10 tons @#25,000

Transportation to site:#7,000



Total amount spent on roof gutter is = #874,862

Total amount spent on building is = #3,743,610

Total amount spent is = #4,618,472

Awesome! Bros, welcome to the builder's club because you over qualify sef :Dlovely breakdown of figures.

spyder880: Awesome! Bros, welcome to the builder's club because you over qualify sef :Dlovely breakdown of figures.

How much will a reasonable size gate cost?

Will join in fully when it reaches the point of finishing.
That is where i am interested.

blank: How much will a reasonable size gate cost?

check this out

https://www.nairaland.com/716689/fence-gates-pictures-prices

Thanks. Don't know how i forgot that thread.

Wood for the roofing akun,
2x4X12 #450 x 340 = #153,000
2x6X12 #750 x 80 = #60,000
3x4X12 #700 x 20 = #14,000
2x2X12 #250 x 400 = #100,000
4"Nails #450X2 = #9000 + 1 bag #5000 =#14000
3" 1/2 #2250
Some chemicals to paint the wood before using =#24,100 + kerosene @#135 per liter x 65 liters = #8775
Transportation #30,000
Total #406,125

woods!!!

more

after painting

more pictures later in the week.

some Carpentry work

more pictures tomorrow!!

roof work

more!

more!!

more tomorrow or next

Good job

trust101: Wood for the roofing akun,
2x4 #450 x 340 = #153,000
2x6 #750 x 80 = #60,000
3x4 #700 x 20 = #14,000
2x2 #250 x 400 = #100,000
4"Nails #450X2 = #9000 + 1 bag #5000 =#14000
3" 1/2 #2250
Some chemicals to paint the wood before using =#24,100 + kerosene @#135 per liter x 65 liters = #8775
Transportation #30,000
Total #406,125

I guess these wood are 12ft in lenght? Because some saw mills cut 2x4 in 18ft sizes which will change the overall estimated quantity. Well done.

Wonderful

I have a question.

Is it better to buy your own materials and give the builder or should you leave it for them to do so?

Learning.

spyder880:

I guess these wood are 12ft in lenght? Because some saw mills cut 2x4 in 18ft sizes which will change the overall estimated quantity. Well done.

YES IS 12FT.
THE PRICE IS THE BEST I COULD FIND AROUND.
THANKS FOR YOUR KIND WORDS.
MY PHOTO GUY ISN'T AROUND TODAY BUT WORK IS GOING ON SITE.
THANKS.

blink182: Wonderful

THANKS AND I HOPE YOU ARE ENJOYING AND LEARNING FORM THE BEST (spyder)

blank: I have a question.

Is it better to buy your own materials and give the builder or should you leave it for them to do so?

Learning.

Depends on you, if you have the time and knowledge then you can buy and give to the builder. The stress is on the knowledge. But this sometimes saves the builder the hassles of explaining why some faults happened with the construction, he cannot be blamed for faulty materials if the owner is the one that bought. Depending on a lot of other factors sha.

blank: I have a question.

Is it better to buy your own materials and give the builder or should you leave it for them to do so?

Learning.

MY THINKING IS IF YOU WANT THE BEST BETTER BUY IT YOURSELF AND I DON'T WORRY IF SOME GETS MISSING.(YOU HAVE TO KEEP YOUR EYES ON IT).
THANKS.

trust101:

THANKS AND I HOPE YOU ARE ENJOYING AND LEARNING FORM THE BEST (spyder)

Yes o, learning a lot.

spyder880:

Depends on you, if you have the time and knowledge then you can buy and give to the builder. The stress is on the knowledge. But this sometimes saves the builder the hassles of explaining why some faults happened with the construction, he cannot be blamed for faulty materials if the owner is the one that bought. Depending on a lot of other factors sha.

Thanks.That is why you are the best.

trust101:


Thanks.That is why you are the best.

Thank you bros, you are really doing something great here. Loving it so much.

spyder880:

Thank you bros, you are really doing something great here. Loving it so much.

You are welcome and thank you too for your contributions.

No work was done today and the person to take the pictures of what was done yesterday isn't around.
Monday we shall all have some pictures to enjoy

@trust101, Kindly help me with your floor plan, I wish to pick one or two things in the concept. Will also appreciate if you can help me with contact of Roman tile seller. My email is boladepiver@yahoo.com. Many thanks bro.