₦airaland Forum

Morning house,is the FTV still working with 4922?

Nice work broda...keep on with the research;I think what you posted earlier makes sense.The difference between 1.8 and 2.4 would roughly be around 10%-15% signal...especially if you calculate using FEC to signal strength ratio...Once again,keep up the good work,maybe I'll try this out after my exams this semester

Lov4sat:
I also use 90cm dish I have tried all the method posted here (tilt your dish up by 1inch yet no way, skew your LNB to 2 oclock I did this all through yester-night when I get home still no way) which magic others that are receiving it used to track this bard 26 E I don't know I am getting 28.E quite well but 26.E is still a no no thing for me PLEASE MAKE SOMEONE US OOO (Especially those of us in Rivers State that have tracked this birds.

Guy I feel ur frustration,do you have a 90cm dish so I can help u track d one at 7W,I barely post here cos of my academics,I'll try as much as i can to create a chance in the weekend...were are u in PH

cabes:
aq
am in edo state sir

From the much I know,E! is ku-band not c-band...

cabes:
Tanks bro
Pls need ur help am currently receiving sony, and hbo,cnn on east but hav Nt b able to tack E! and disney channel. Pls what should I do.

where is ur location?

abohwun:
this is the cost of complete set up not only the dish. 1.8m is 12500k-13500k in my area. while 2.4 is btw 35k -40k.

is it plus decoder and installation fee?

abohwun:
with 2.4m it cost around 50k but with 1.8m around 30-35k it depend on type of receiver you are buying whether strong or cheaper one.

Here in PH,1.8m is around 16-22k

Ameboperoo:
That sat is below our horizon in Nigeria. Forget about it.

Even going beyond 80 deg in northern Nigeria is a herculian task but not impossible!

Explorers:
But why is it not breaking at the middle despite the heavy vehicles that will be plying it, because i can't see any support here.

That's why it's a cable-stayed bridge....the whole weight of the structure are on the two giant pylons...

I have nothing to say!!!

Kene1245:
Good day house , I have a problem with my SRT4675Adecoder for the past 7 days now , it keep showing loaders Menu. and I can't do anything on it . please help!!!!!!!!!!!!!!!!!!!!!!!!!

I also have the same problem!I tried upgrading with 1.39 on strong website but it freezes at the last stage of ugrade!

Pls I need a link to download software for 4675A but not the latest version...I need a version less 1.39

House I need a software version older than 1.39 for 4675A...pls send to opssonopsson@gmail.com

Usmandebrave:
i check my using q23g around 7am to 8am today is working fine.

I'm using 4950

My sp24 @34.5W is off since yesterday,is it general?

@Eldorado382 Do you have 16E in your combination?I bet that should be the culprit;It will always try to do an OTA upgrade when switched on.It's only a fake patch that can wake up the box!

Eldorado382:
Thanks 4 ur response but watch my image to know if it z original but d little i know z dat d (i & o) symbol at d back switch show that it z fake

I'm sorry but your box is fake,so the original patch can't help you on this one!

Before you guys start blasting me,I want to reiterate the fact I'm neither a strong marketer or MTN ambassador,I'm just that random fta ethusiast like anybody else!

I've said this before and keep on saying;If 4922 starts autorolling today,these guys screaming freesat,wondersat et al would throw these toys away.I still can't fathom why people would rate this "new generation" boxes over strong boxes.Most of these new boxes came to be in the advent of PV and cannot rub shoulders with strong;just because a sweet-talking blogger who was paid to advertise a certain box says 'x' brand is better,you adopt the same view.This can be likened to saying etisalat is better than MTN!

Same here too!I think the problem is from IMG!

steppin:
Don't be too sure. Besides, some people here turn their dish at least twice month.
So, no stress.

Come on man!I'm not blabbing,make your finds and report back,All MBC packages beamed outside Nilesat doesn't last;specifically that of badr,it comes on and off!

Guys,just save yourself the stress,those new channels on badr 7 will soon be discontinued,all these years they've been coming on and off or scrambled!

Valto:
qsat 28g software, sent to your email

Thanks a million!!!

ify4king:
wat software are u looking for?

autoroll for Q28

Valto:
here have it https://drive.google.com/file/d/0B0RADSNmMIPRTFhFSGhWcHRnQmM/view

I can't download the file, you have another link?

@Lincolnola There are still good RF modulators out there with good pictures but slightly expensive;there's one I bought 3yrs ago for #3500 with options to set the RF Channel no (21-69),RF IN and some other options.After using it for over 3yrs,I give it to a friend who does CATV business.Go for quality instead of the common brands sold for #1.5k-2k which will have to generate the picture randomly.The other method suggested by doctorHindus may harm your box on the long run because the "LOOP OUT" wasn't made for that!

Anybody with the link for autoroll for Q28?Ify4king

satelliteDISH:
Pls guys, help me to confirm tvc news and tvc entertainment on 16E. mine is not showing. What is happening to its frequency 11294H45000?

It's red here too,they've been coming on and off for over a week now!

Ospina really saved our ass,that guy is too underated!

On my setup,12522V30000 is just barely 65% and all the other T.Ps are working fine.After the upgrade,I tried tracking multitv separately on a single dish (All these while,I always attached it to 16E as secondary using flexible wire) but couldn't hit green;I had to skew my LNB to H polarisation (7 or 8 O'clock) and hit 88% without hassles;What I'm saying is that any persons have issues with 12522V30000 should just skew to 8 O'clock and you'll hit green in no time.Then for those who have 16E on their combination MUST make sure they DON'T use the same T.P for both birds as some receivers will see the two T.Ps as the same i.e Don't use 12522V30000 and 12522H30000,Instead use 12525V30000 for 28E and 12521H30000 or any other close T.P but they should not be the same.Some strong boxes are even guilty of this.Then again,If you're using a diseqc,DON'T use ports parallel to each other for 16E and 28E.We've gone a long way and achieved giant strides here,these are issues already discussed in part 1 of this thread,I don't think basic Ku-band problems should be an issue after we've tackled trickier C-band issues.FTA rules!One love!!!

Chinedu7:
Diseq is more than capable of doing that, you will be amazed.

That happened to me a few times,sometimes some polarisations wouldn't even turn green!

Chriswazo:
OK,i will. what's SCC sir?

SCC is short for single cable connection