olaolu11: Let me answer your question this way. I removed my "bad" followcome 9ah battery from my generator and used it with the solar panel for TV all through the weekend. I forgot to remove it on Monday and went to work. According to my wife, at about 11:00am noise stated coming from the inverter. She then put on the TV and he noise stopped. I got home at about 4:00pm to see the battery all swollen. What caused it? The panel charged the battery to full and kept pushing more juice into it. The sound stopped because my wife shifted some of the load to power TV. If she had removed the battery, there won't be problem. I expected it to stop charging automatically when it is full but it did not so the battery got spoilt. I learnt a valuable lesson, don't assume. So I don't underload my panels with battery again. Maybe the gurus in the house will shed more light. But I believe you can use anything above 80ah. I have used 7ah severally within sun hours to watch TV without any problem. Attached are pix of batteries I have used but which I now use solely for my fan. I believe everything is dependent on your solar array. I installed and used 7ah for light only for my mum with 20watts panel. I still plan to increase same to 40ah-80ah and 100watts-150watts panel.
Explain the above, did you connect panels directly to batteries, charge using inverter or you used charge controller?
Because no good inverter will overcharge your 9AH batteries, I have used 18AH batteries and inverter charges it fine no overcharging occurred.
olaolu11: SSorry,its when charging with generator. Not with grid. Guess maybe because the generator is low for all. But shouldn't a 2.5 carry it?
As you said, when you switch off loads, it's start charging then, the generator needs to be checked, I'm not a generator person I don't have Idea about generators.
Yes, Luminous.
I have tried charging the 500va with a small generator of 1kVA before, the Gen always Trip off, I invest in Solar instead of buying Gen.
olaolu11: This is for luminous inverters. And based on experience with mine, whenever I am charging my 200ah battery with grid, it will stop charging except if I switch off all appliances and leave battery only on it. But the scenario does not happen when charging the 100ah battery.
Your inverter/Battery has fault, you can charge 200AH with even 500VA, I used it for more than 3 years, there was no charging issue.
Same manual recommend only 100-120ah
It's only mean it will take longer to charge.. that's all
It works like UPS na, how does load affect charging?
When you have grid only Charging will be activated, and when it's fully charged it should stop
mogreen22: but I stream @7mbps does it mean download and streaming speeds are different?? I feel network that streams @7mbs should be able to download at that speed too. I might be wrong though
mogreen22: I’m seeing people’s comments on how bad Swift is but reverse is my case. Since this lockdown started. My Netflix has been steaming in 7mbps 4K 2160 without buffer. Downloads are like 2mbps. It’s weird cos I never used to get speeds like this. Maybe they have increased the throttle on the unlimited supreme to 7mbps cos I know for over 2 years highest I got was 3mbps. Know it’s really fast. Might be because of the lockdown too though
It would make sense if they actually increased to 7mbps.
Malevonent: Nice display. Could you elaborate on how you hooked it up. I have 2 of such lying around.
The connection is quite Simple, I use 1 Shunt and Two meters.
I used speaker wires..
There are 4 ports on the meters, See the connection below: Battery + goes directly to the Battery Battery - goes to the Shunt where load is connected in my case inverter. Shunt -/+ connect to the middle section of the Shunt on meter 1, then interchange on meter 2 to get Charge and discharge
JaySterling: I was responding to someone who said my resting voltage should be 13v
Yes, you are correct. At fully Charged, I get a over 26V too under No Load..
I don't know why people Take resting Voltages, when your Inverter only disconnect under Load.
For Me, I use Under Load Voltages and it's most accurate for me...
See below I started at fully charged about 25.7 V there about.. Now I have discharged 400wh approx 17% DOD on 2400Wh battery Voltage still above 25.1, which tally to the Graph posted.
Someone is saying Solar does not live to expectations, and another is saying he is having too much power up to the point of willing to share to next flat
eleojo23: Wow, from AliExpress? I guess I should have had a little more faith
I think this one will deliver more bass because it has a dedicated 20w subwoofer which delivers heavy bass punches. I can't play it at max volume without constituting a public nuisance.
The Soundcore Motion+ may beat it in terms of surround effect. I expect the Soundcore to have better balance between highs and lows and overall stereo effect.
eleojo23: In the spirit of getting energy-efficient appliances, here is a woofer speaker for anyone who is looking for a good sound system with low power consumption and impressive sound.
I was looking for an energy efficient sound system for my DC TV 'cos I can't stand the sound from it, it's plain annoying (no trace of bass at all) . So I looked up AliExpress and was seriously considering the Soundcore Motion+ soundbar but the corona thingy stood in the way. So I decided to search locally and I saw quite a number of DC options that work with 12v battery but most consumed nothing less than 60w.
I decided to give this 40w rechargeable woofer speaker a try and was pleasantly surprised. It has an inbuilt battery that can last for 2.5-3hrs depending on the volume. So I charge with my inverter or PHCN and use it with the TV. It gets fully charged in less than 1hr and lasts for 2.5hrs on battery. Trust me, the treble is good and the bass is heavier than most soundbars (I am a 'sound person' so I know what I am saying ). It has Bluetooth, FM, Aux at the back, USB and SD card slot. There are also treble and bass adjustment knobs. The size is 21 inches X 7 inches X 5 inches
It's available on Jumia. I believe those of you in Lagos can get it offline for less than the Jumia price. These Jumia and Alaba sellers better prepare a commission for me for this free advert
Oh, so I have people who think like I do, The Soundcore Motion+ may even beat this with 4 driver 10w+10w+5w+5w.
My home theater consume about 50 watts, in terms of sounds, Motion+ produce all the sound I need, my wife always tell me it's too loud.. I only put it on 50% Volume portable but does the Job..
ojeysky: If you have the battery protect connected to your inverter and BMS in the way he suggested and assuming you've bottom balanced your cell then fine. However it seem you want the inverter to do that instead hence am not sure how the BMS will disconnect the inverter since there is no ground of the battery protect in the equation (as Will explains).
However yes "case closed" and make I also close with will's statement "If you are not using a BMS (not recommended, for advanced users only)" all the best with that Bro, me I never advance reach your level
ojeysky: You have your answer between 13:40 and 14:05. He only used the battery protect because of the challenge he had with the BMS but he rightly gave the hint suggesting not to try this on a normal situation
Yeah, all for protection, he did protection off the BMS with LVD, if inverter can do that then I'm good. My conclusion was BMS protects and balance Cell.. If Inverter can protect then, I will leave inverter to handle it, then BMS continue to do it's balancing..
ceaser: Talking of not using BMS, here's an 18650 gone ballistic. Note that I've several modules like this working successfully without BMS for months and still going good.
But this one nearly burned down the shed.
Your example is off, no proper soldering, I cant even attempt this type of connection, even with BMS, your cells are not properly connected, hence BMS will be useless..