₦airaland Forum

Conner44:
You can create one by yourself. All you need is

A length of oil pipe/hose (the same type and size with the one running from your pcv to valve cover)

Two small pipes of similar diameter with your pcv hose fitting

Weld the pipes into a small container (vacuumed) with one sticking further into the container than the other (one pipe should be shallow and one should run half way deep)

Iron sponge (the type used in washing pots) that will be wrapped around the deeper running iron pipe inside the catch can

And hooks/hangers or a way to mount the can somewhere convenient in your engine bay (as far away from any major heat source as possible)

Also make sure the can you choose has a screw cover or you can weld a small tap/valve for emptying the contents out when it’s caught some oil.

I e done it before. I used one of all those aluminum water bottles that office workers usually carry around. On an EOD engine it caught some oil over the course of an oci and I’d recommend it to keep your valve train and intake manifold sludge free.

datola:
Nice.

Note, Amazon is not coming to Nigeria for e-commerce like Jumia and Konga business but for thier AWS.

ScamDemicEra:
.... there was never a country, it was an illusion.

GuyFawkes7:
in Benin City, it can be seen at Aduwawa/Ikpoba hill axis


My 2 cents tho

2saviourfriday9:
Time has pass

Pathokpo:
I hope he died a violent death. If you live by the gun you shall die by the gun

Silentgroper:
Big boobs is overemphasized.. In short it has expiry date, bum bum doesnt..