₦airaland Forum

rotecch77:
More

Good morning Rotecch, pleaae what's the total cost of labour for plastering this building.

And what's the best way to negotiate plastering work? Thanks

rotecch77:
I usually look at plate that will not be quickly outdated ( just simple design that will fit in the structure)

Square pipe and frame should be thick one I.e 2mm or minimum 1.5mm

Also the lock should be ready made type.

Thanks. These info. would be handy when negotiating with the welder.

rotecch77:
Nothing special about the door
Only that I give the pipe specification and the plate design I want.
Any listening welder will do same
Never the less if you still need his contact let me know

Thanks, that makes sense, what are the pipe specs and plate design one should be looking at in a good door?

rotecch77:
The door sample pics

I like these doors, please could you give the contact number of your door fabricator?

rotecch77:
Tiling about to start
Total area to be tiled both wall and floor is 1,800sqm (950 cartons of tiles)
All are Nigeria made tiles of good quality.

Total cost 3,5m.
Cost of tiles only o

3.5 M, that's serious!

rotecch77:
It’s made of pop materials
Thanks

Thanks, that would save some cost.

rotecch77:
Pop still in progress... mainly on down section
To save cost we just screed the slab and introduce cornice to the angles.

Good job Rotecch, what material is this cornice made of, is it POP?

RockOfAgesAlumi:
May be the quotation is for TOWER MATERIAL,

but if you don't mind this quotation is for THICK IMPORTED MATERIAL
with installation
1500 x1200=48k
1900 x 1450=52k
1200 x 1000=40k
900 x 1200=32k
900 x 1400=40k
600 x 700=20k
300 x 1400=20k
Thanks

Are these prices with burglary?

chuksbogus2001:
I am ready to tear it down . If professionals were of the openion that it's not good.

I understand you bro, I always asked them at my site to tear down whatever doesn't look appealing to me. We are at the stage of plastering and I have asked them to stop until i physically visit the site and remodel the spaces to my taste.

Am not a fan of high roof. I told my carpenter to do 14fts and he wanted to impress me, he did 16fts, by the time I woke up and receive pictures of what they've done. I told him to remove it, see pics below.

Anyways, the hight of your kingpost should be about 18 to 20ft. And it doesn't look bad though. Will advice you to leave it or follow @ n3xt advice if workable.

successmatters:
Another yoruba man here to defend his brothers, are you a crook like brabus?

You must be stu..pid, do I care about tribe. To h£ll with Yoruba and Igbo.

Nothing would happen to this tread. You uncivilized lots think you are the only people that are viewing this tread.

And I would be disappointed if that man apologise.

zuraking:
I don't know why adult with old white balls behave like eediots. Must everything be about tribalism? We have criminals in all tribe in Nigeria. If you aren't a tribalist, you won't count his post as anything.

My friend you've said it all, am just tired for some people. Just imagine what one was spewing. Imagine the level of uncivilized people we deal with some times. They carried tribe on their head like rock.

Keshinr0:
I swear what the nigga wrote just dey vex me.
Canada minimum monthly wage is $2900 that's about 1.4million.
They want to earn such an amount, but they don't want to spend up to #100,000 monthly

Please where did you get this information from. That's wrong, minimum wage is nothing close to that.

n3xt:
If this design work for you, the mold can be readily available when you’re ready.

Your location?

Thanks. Will chat you up on whatzup

n3xt:
Rotecch77 sure have. I have too (about 36m) but not in Lagos at moment.

Rotecch77 used it in one of his project here. I believe it’s more economical and faster than using woods.

Thanks, when would yours be available? Will also talk to Rotech77.

n3xt:
Have you considered using steel mold for your concrete parapet instead of woods?

For roof carcass, I’d suggest you buy from Lagos in order to minimize cost or get a reliable person to help you source from other state and deliver to your site. You can get standard wood in Lagos a little more expensive though.

Thanks n3xt. No, i haven't thought of that. If it is economical, why not. Any link to read more about that or anyone that I can talk to for rentals?

saydfact:
You won't get 12ft in Lagos ooooohhh...
for hardwood the best is 11ft BUT most wld be just a lil over 10ft..

so use 10ft to do your calculation and hope you know for overlap, you'll use about 3ft. leaves you with 7ft (if you understand)

I see. Thanks, Will do that.

Good morning my wonderful people, am at the point of doing concrete parapet and roof carcass. The first question is, is it true that the 12ft(3.6m) hardwood planks are not the true length, that's what am using for my calculations but my carpenter is saying the lengths are shorten now adays, and what are the true lengths of hardwood planks in Lagos and surroundings.

To minimize cost, what's the best way getting the concrete parapet and roof carcass done, since am not on ground to get somethings done myself.


Thank you for your responses.

jiday4:
Banku and Mokere are very close to Isheri North and always flooded when there's heavy rain and also when dam is open from Abeokuta.
The best area along Lagos Ibadan Express Road to buy land is Arepo,Magboro but not Gaun area .
I hope the info help

Thanks for the info. I actually have two landed properties there, I bought them since 2016. Was planning to start something there before covid striked.

KolaShangOne:
Isheri North experienced serious flooding when there is heavy rainfall or when the Dam is opened.

Don't go there.

Please what part of lagos/ibadan express is isheri North?

Also see the attached map. Is this area inclusive?

Trump is a gonner

Mjolnir:
Opinions are like anuses, everyone has one, carefully weigh ypour options and the kind of tenants you are targetting, as far back as 2008, i rented a 2br with visitor toilet and both rooms ensuite, thus 3 WC FOR 350k, in woji axis, and it was gr8. everything depends on location and target tenants.

my dads old house in the village, his rm isnt ensuite, and we hv told him severally, for us to make it ensuite for him, he has vehemently refused. , guess he doesnt understand the concept of toilet being in the same space as the room. for an 800k rent 2br house in present day nigeria. they sure deserve and will like the 3 WC arrangment, for a sub 250k a year rent, its a no brainer putting 3wc based on cost/clientel

I love this topic, i wish i was here 6 weeks ago to read these comments, it would have helped me in the decision I made just last week.

SurveyorGeo:
contact Checkitaut

Ok. Thanks

Good evening Guys, please what are the prices of Sharp Sands and Granites. I have a site around Iyana-Ipaja area. I feel the prices they are giving me for 15 tons is on the high side. They said the tipper are loading from Ogun State.

Also, can I get a contact to deliver in the said area.

Thank you for your responses.

SOLD! SOLD!! SOLD!!!

kllinxman:
1.4 serious buyer

Sorry, just seeing your message. I've been away. Send me an email if still interested, so that we can talk better.

TGIF

More photos

Still hot

Attached is my Tokunboh 2008 Mazda Sport 3 for sale.

Just been cleared from the port with clean and complete custom documents.

Clean in and out and runs fine

Is situated in Ikeja, Lagos to view it.

It is going for 1.75M (Negotiable)

For best offer, send me an email to

jefflamipo@gmail.com

or call this number 09096496127

SOLD!

GM

Morning