₦airaland Forum

Few people mentioned that some Redmi devices network goes off for few seconds(refresh). Pls is this true and what models of redmi don't do this cause I can't be using phone and data wee b going off few times a day.

So network wee just go for 10secs for no reason. Pls does this happen on note 11 pro. I thinking of getting 1 soon

Miracood2:
It's a general thing on Redmi phones.

The network will just refresh itself whenever it wants. Mine happens like 6 times daily. Although it takes less than 10secs to complete the refresh.

Modified: As I was making this post, the network refreshed itself

This type?

footprintD55:
Does any1 here sell steel plate rack?

You mean battery balancer and charge controller? Yh sure, I can do that, I'm in Ibadan too. Check my profile for my number

Stephendeals:
Please I need someone who can install Battery Balancer and controller on inverter battery

location is Ibadan

If ure living in a 2story building or higher with limited space. Ur panels nogo see better sunlight with this design. Best is roof. He can always sign an agreement with his landlord Incase of roof damage and make payment down to let him no hes serious. Note, the payment must b refunded if rood is left intact

oweniwe:
Does the tenancy agreement also forbid something like this?

If not, just get a higher pole to keep the panels out of little children's reach. I have seen pole holding 3 panels up to roof line.

So I don't think the tenancy agreement is a problem

I have heard of this on a particular yohako inverter. I guess it's not from Felicity itself. Nah our people dey run am

zeestone99:
I saw it real. Nobody told me bro.
I have installed a 10kva Felicity. Guess what, that 10kva is a 5kva Felicity inverter that was labelled 10kva inverter.

There is also one guy me and earthrealm was trying to troubleshoot his setup. Everything was fake. His Felicity 100a charge controller was actually 80a. Those guys relabeled it to 100a.

They have upgraded from just labeling panels to labelling inverters and charge controllers.

Good choice of battery, contact valto for prices

yemi2plus:
Thank you!

Actually, I am looking towards lithium batteries, I read that they're more cost effective in the long run.

What would an ideal budget be for the set up?

Ask zeestones

isangjohnson:
Who gets 1.5kw 12v PowMr hybrid inverter for sale?

How much?

ganie:
I have a tizeti wifi I can sell to you...I am in Lagos.

Wats d size of d bedframe

Seunisco:
Wardrobe and bed frame for sale
The mattress has been sold already.
Reason for sale( relocation back to parent’s house, outside is tough)

Both are very very neat and clean

Wardrobe price: 70k
Bed frame: 65k.
Prices are not fixed , they are negotiable. Please send in better counter offers.

Location is Ibadan.

WhatsApp: 091.24263967

My battery doesn't float at all. Cause if nah 30a 27.8v e take reach 97%. Nah that same reading e go take enter 99%. BMS den put off charging feature n only allows cells discharge feature while active balancer discharges the cell that triggered the 3.65v.
The charge controller at this moment only displays the amps which my inverter is taking(eg if I av 270w of load on my inverter, the CC only will show 10a.)
The moment the active balancer reduces the the voltage of the 3.65 to 3.50, BMS activates charging and CC shows 30a again for few secs n drop to 10a again.. d cycle continues like that. This is also the case with jbd BMS wey get passive balancer

TechGeek777:
Hello bro, how does your LiFePO4 battery act when floated with your Crown Ricco Plus inverter, does BMS shut power from CC and power the load via battery power?

OR

Does it leave the battery in a floated state and allow power to pass through CC > BATTERY > LOAD?


Note: This question applies to when Load is connected and pv is available during the day!

I had to check back on our conversation. Can you snap ur CC screen where d amps is displayed. I want to know if the 9a is the panel output or your CC's output

dbshaywhy:
It display amps.... And highest I've seen so far is around 8-9 amps.... On some Sundays if checked... Coz I work Monday to Saturday.

I mean instant power coming from ur panels per hour or does it displays amp. If it does, aw many amps max av u seen on it b4? The charge controller is meant for 30a but can handle Abit higher. Say 35a. So if ur 2 200w does give u up 25a. U can add 1 more 200w. But if u get above 25a. Just change d controller.

dbshaywhy:
Its only brings up total harvest and not daily... Or is there a way out I could find this?

Ure very correct. Funny thing b say. I saw some1 post the item online, I say make I check out the spec on Google, d next time I opened my alie app, the item was part of the list dey were offering 50% discount on. I sharply buy am.

Olamak1:
That must be "Choice item!"E no dey get refund. The enticing baits on such items are the low prices put on them.

Abeg how much does it cost to return an item back to china. Seller not replying messages, item came bad n AliExpress require I send item back

Does ur 2 panels produce up to 390w at peak. If yes, it best u change d charge controller if u wantu to add more panels.

dbshaywhy:
Good morning professionals... Is there a way of increasing my solar panels as I currently used 2 200W panels for 12v system with Mercury tall tubular battery of 220AH...
Note.... My cc is an old epever tracer 3210a of 30 amps... I've included the copy of the stated manual.
Thanks.

Ofcourse
25.2v+ is still full bar with load on it. It might b lower than that depending on the wattage of load on d battery. The moment u put off all load u will get ur 26v or 25.9v which is still full bar.

temi4fash:
The battery is Icell AGM Battery

The load is just lighting bulbs, the energy saver ones.

Sometimes even before any load, once the NEPA goes off, we have the drop in voltage even before any load.

But the load is the energy saver in the house

U didn't state ur battery type, also d wattage of load on it

temi4fash:
Hello Sirs,

I was not in the house for some days, i noticed my inverter charged my batteries up to 28.6V when still connected to NEPA.

Immediately i put it on load it dropped to 26.5 and rapidly up to 25.9V and stabilises there and do not drop rapidly again.

What can be the problem?

Lol

StarGraphicX:
70k boss

Phone, charger, box and receipt?

BrickDevo:
Available
6gb + 128gb
6.67" Amoled screen 120hz
115k fixed

Abeg which 800w or below pressing iron is ok to buy. Not something that will stop heating after few months of purchase.

I stay in Ibadan. My WhatsApp number dey my bio.

Hollawayn05:
Hello great minds
Kindly refer to me a solar expert in 8badan that lo help look into my system

They can be place in wells too instead of surface pumps.

gsparks01:
these are for boreholes not wells right?

Aw much is the 3gb 1060

fredkellz:
I have two gtx 1060 3gb graphics card for sell working perfectly....other cards are also available,8gb to 12gb too call to let me know the one you want. whatsapp or call 07038372440.....location is lagos

U welcome boss

odimbannamdi:
Thanks for sharing, boss.

I thought I saw 20k on this before. Hope u no brand new of this is currently 18k off Alie

stylishwears:
Hello, selling this lovely smartwatch I was gifted
Zeblaze vibe 7 pro, only opened to check it.
Price: 25k. Location: Lagos
Whatsapp: zero7zero3111o249

Do u av 6kg cylinder and 6*6 bedframe

Has any one here used battery isolator for a 12v solar system here. Most of the articles i came across online is majorly in automobile application. I av two 12v battery, 1 is in excellent condition, d oda is fair, I don't want to parallel them cause in due time, their performance will b equalized. So I came across a suggestion of having 2 batteries connected in parallel but are separated with an isolator which allows Dem to charge n discharge individually.

I thought as much. It's very close to 2kw last I checked. How did you remove d wire connected to d submersible though.

TechGeek777:
Finally did the test today with "CLAMP METER DT3266F"
Surge: 16.64amp * 230v = 3,827.2w
Continues draw: 8.2amp * 230 = 1,886w

The reduction in consumption is as a result of stronger/better wire used (2.5mm² Comester)

Below is the initial test done in Q1 of this year.
Max Surge = 19amp * 230v = 4,370w
Continues draw = 11amp * 230v = 2,530w

Boss there is a 5kva 48v variant of the inverter but my supplier said he's out of stock

TechGeek777:
I believe this 2kw+, measured our newly installed pump last two months, steady draw was 2.2kw - 2.4kw+, while surge was heading to 5kw.

I will measure it again with clamp meter since we recently changed the wire from meter control box to the surface of the underground pipe to 2.5mm comester.

The pump depth 180ft plus from ground to surface, while from surface to thank is above 30ft.

I strongly believe most 1.5hp consuming 2kw+ are 2hp labelled 1.5hp.

But I will do the test again, perhaps this week when I have the time to know the difference now that new wires are used.

Boss abeg how much can I get this type of carburetor

GAZZUZZ:
Already equipped with a CNG/LPG/Petrol carburettor.

3.1kva fireman generator

2 units available

₦170,000 each.


08033910382 ogba Lagos

6mm for 50yards distance... There will b voltage drop oo. It's better u get 10mm

EmperorVamo:
1 400w Solar Panel 3 145,000 (435,000)
2 40A Charge Controller 1 85,000 (85,000)
3 8 L-R Roof Mount 2 8,700 (17,400)
4 6mm2c Wire 50yards 2,150 (107,500)
5 Solar Kits lots 6,400 (6,400)
6 Service Fee 1day - (50,000)
TOTAL INVOICE - - N700,000

See quotation I was given for only panel integration

I just dey laugh since morning