₦airaland Forum

freshp:
@Olofofo
Pls kindly Consider him. . .i have seen his contributions for some time now.i think he will do good

@lov4sat,
That i am recommending you means a lot to me. . .please keep the Flag of FTA Flying.
Goodluck.

@Freshp

Thank you very much for your support. like I said before I will try all my best to sure that I keep to the rules of the house.
May God richly bless you my broda

Tomi247:
I really enjoyed every one of u in this thread.Pls is it posible 4 me to watch multi tv on srt 4653x bcoz hav tryed all my best but it always on audio alone.Pls if there is any way out help me pls, Thanks

Go and get SRT4669x to watch multi tv cos 4653x is not an mpeg 4 box

Fred4life:
But no audio on dat fta tp fo dstv

yes but if your infinity has audio then you should as well have on those channels too

@Olofofo

I beg I am applying to be a member of the backyard group. I promise to abide by the rules of this group please kindly consider my application my email is ovighojay@gmail.com, sincere thanks for your understanding

@All, can some body confirmed if multi tv signal is still on and running? cos mine is red and no channel is up in cluding infinity tv

Olayinkaoj:
The website is written in Arabic, so no information can be gotten by me from there

Olayinkaoj:
The website is written in Arabic, so no information can be gotten by me from there

The site can be translated in english though I do not have a big dish as there is no space to mount it

williams85:
no i don't recieve it
can u recheck the tp
goint through lyngsat.com it not there

@Williams85 may be you need to check very well again

yemoxtra:
Now fta dstv new Tp 11844 v or h 27500 with many good channels try it now - ss9,ss blitz, mworld,Amagic,channelo and many more

QONFIRMED!!!!!!!!

odilibe:
that is south africa beam,

does this require the 6969 thing to enable you see the pictures and audio?

guente02:
Preparing to Update 4 the First Tyme with serial Cable. . . any Fore-warnings?

Just make sure you update with generator to avoid fried box cry

@mdd4

well if you say that it is the lnbf, then you maybe right but I advise you check ur connections properly b4 concluding that the lnbf is faulty.
I once had a case like that some time back and I later found out that it was not my lnbf but the connection that has the problem.
I also advise that you try another dish if you have any spare one to see if it is the lnbf that is the problem then log on to www.lynsat.com for sat freq and SR for Africa at least this will go a long way too. happy hunting

@All any info on CRTV yet

All 36east are now scrambled

femtek98:
is there no way we can use 4653x to watch all channels in 4669x i upgrade it it search the signal kilonsele vox and other but did not display i only hear sound what should i do?

go get an mpeg4 box

@ALL
all DSTV channels don disappear from my box is anybody having same problem??

@all enjoy DSTV NOW B4 THEY CHANGE THEIR MIND OOOOOO!!!!!!

gadotor:
@ALL CROWN ROYAL TV OR CRTV ,THE NEW INFO I GOT FROM THEM TODAY IS THAT THEY UNABLE TO COME ON AIR LAST SIMPLE THAT THEY WERE UNABLE TO FINISH WORK ON THEIR UPGRADING,BUT PROMISE ME TODAY THAT THEY WILL BE ON AIR FROM WENESDAY THEY WILL START TESTING,ALSO THE SAY SOMETHING NEW TODAY THAT IS LIKELY THAT THEY WILL COME OUT WITH NEW CHANNELS AS WELL,I WISH THEM ALL THE BEST.THANK YOU

THANK YOU VERY MUCH MY BRODA FOR THIS INFO, I HAVE WAITED FOR THEM TO COME ON AIR FOR SO LONG A TIME

where is crtvooooooo!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1

mdd4:
Weldone gud pple in the house, pls i need help, my oga's dem pls i ve be trying to install a 1m dish with a universal LNBF guys with all the exprience after all there is no reception at all inrespective of the freq, srate, could it be dat d LNBF work with d 1m dishand d strong receiver, pls i need help.

Which of the birds did you track with the 1m dish?

Akerekoroabijawara:
My wife is heavily loaded n we are expecting a baby very soon.pls wish her safe delivery n pray make the pikin be boy so dat he will be assisting in tracking those stuborn birds.

PRAYERS ANSWERED AND YOUR WISH GRANTED

Anthofrie:
I was upgrading it and light went off. Since then the front display won't show, it won't boot. it will only show black on the tv screen. Kindly help me out

if you do read through this thread very well before carrying out the upgrading process you would have known that upgrading your receivers with PHCN is not advisable mostly if you are a niaja man.

anyway just find thesame model of your receiver and do receiver to receiver transfer.

Good luck to you

I beg na wetin una dey send coded make e still reach me too now my plate na reyanjay@yahoo.com

andymola:
@freshp, pls would u be so kind to help forward the stuff to my mail cos Aka Tonero said he's quite busy now Andymola4all@yahoo.com . @aka, tonero, but I'm not in a hurry so if freshp is busy too, I can wait till wen either of u is less busy. Thanx so much

seaylan:
@ lov4sat thanks 4 replying my post but i still need advice. I want to get an additional dish. Wat satelite can i hope 2 track and wich directn shld d dish be. D one i hv nw is trackin Astra1f (Astra 2b if u choose) and i get multi tv.

seaylan:
@ lov4sat thanks 4 replying my post but i still need advice. I want to get an additional dish. Wat satelite can i hope 2 track and wich directn shld d dish be. D one i hv nw is trackin Astra1f (Astra 2b if u choose) and i get multi tv.

I think you got the best sat any 90cm cud get unless if you plan going deep with bigger dish that is where FTA enjoyment is.
but since you can recieve multi tv stick to that or try sirius 4 and w3a which is some what kind of tricky to nail.
just read the thread carefully and you will sure get help

Anthofrie:
Help Help Help. I have try to do reciever to reciever firmware transfer but my reciever wont power on. The front display light don't show. Please, what can i do to bring back to life my dead reciever. Thanks in advance.

what happen to the receiver before it went off?

Anthofrie:
Una well done o!!! All d guru in d house. Pls my srt4663x don't power on again after upgrading it. What happen was that , during upgrading power went off since then it did not power on again. Please, kindly help me out. Thanks in advance.

Just do box to box transfer and it will be just fine but make sure that when next you are upgrading do not use PHCN use GENERATOR I BEG YOU!!

gadotor:
About (crown royal tv)or crtv crtv crtv ghana on astra 2b,i went to the their office and the new info is that their off for maintenance works to get their system to mpeg4 and hd ready,and they will start work on the 11th or 12th november 2010,thank you

Good work my broda. Keep up VIVA FTA!!!!!!!!

walexy1:
pls kindly send me link to those threads. can't seem to find them

Read through the thread carefully https://www.nairaland.com/nigeria/topic-357272.0.html

segunfms:
@all

where is our Nigcomsat

maybe it crashed into the sun

GBAM!!!!!!!!!

THAT SETTLES ALL

@oyefesobi
the issue of audio with all infinity channels has long been treated and moved passed read other threads carefully you will surely find answers to your problem.
the CRTV problem is general and we believe that they working on something and as soon as they are through they will come back on

seaylan:
Hello, I am truly a greenhorn so all blunders should be pardoned. I have just procured a Multi tv system(dish, receiver). I receive about 26 channels but the infinity channels don't come with audio. I have a Multi tv decoder and from my observation on this thred I don't think there is a software yet to upgrade the receiver in order to obtain audio. In fact if I had known and had been well-advised I would hve gone for the Strong 4669 receiver. The guys that did the installation were in such a hurry cos they had other jobs. Now I need advice cos I intend to procure an additional dish since I was told I could obtain more channels if I do that. Also I noticed that instead of Astra 2b, the satelite used is Astra 1f. Any advice from the house on the implication of this and on what to do? By the way I reside at Sango.

My broda the name of the bird has no problem maybe that is how the decoder manufacturer named it provided you get the desired channels no too border urself unnecessarily over nothing

Mine is down too maybe they are working on something

rich8:
all.thanks to u all for u efort thanks elort .but the problem am having now is the loader can not detect the receiver simple bceuse the loader do detect the receiver when the receiver is on i dont know why is like that please if there is any solution please give me a hand please

@rich8
You did not explain how you connected the receiver is it with a flash drive or RS232 cable to a pc.
1. it the rs232 cable properly configured and your software unzipped