₦airaland Forum

Call this number 08165520837 or 08156087872

Your problem are so numerous. Clear those codes with your scan tool.drive the car for 30mins and rescan the car to see which codes are left there.

As for your sluggish movement: I always tell my clients honda does not have a substitute for transmission oil. The recommended trasnmission oil is Dw-1 or z1. Am very sure those road side mechanics have done some Acradabada to your sweet v6 honda accord

As for your car going off (stalling): a complete tune up is needed I.e change spark plugs, service injector noozles, check fuel pump pressure, check fuel filter, now according to you you said you have changed the spark plugs and fuel pump

Now a quick question as regards this was it the complete fuel pump module that was changed or just the pump? Did you get the recommended spark plugs?

As for the sound you hear in your engine when the Ac is on take it down to your Ac technician

My 5cents. Don't thank me now thank me later

Go for a comprehensive scanning to determine the exact cause. Call 08165520837 or 08156087872 to scan. Bb pin 7BE1C522

Do you have black smoke coming out from your tail pipe? And also your car is due for tune up I, e changing of spark plugs, servcing of injector noozles, checking of fuel pump pressure, checking of fuel filter if its clogged up but answer my question first then I would take the rest up from there

What kind of scanning device was used?? With those disco lights on you should have codes. Go for a more advanced and comprehensive scanning and post codes here on later

Call this number 08165520837 or 08156087872

Avoid a trial by error . Go for a comprehensive scanning for a 2007 camry it should be a drive by wire. Run a scan first and return here by posting scan result, Then we wld take the next step based on the scan results. Even though your check light is not on go ahead and run a scan

Do you have the check engine light on, if yes then run a comprehensive scan. Am looking at your car having a problem with its idle control system. But go ahead and run a scan

Call this number 08165520837 or 08156087872

I disagree with you. Its a drive by cable that has their map sensors on top of the throttle actuator

@ siena tnx for the correction @ other men too tnx for the correction. Didnt read all through well.

What's the problem?

Was it toyota that said so or the the so-called road side mechanics? my dear go ahead and acquire your sweet sienna.

Bump!!!

Nice initiative this can also prevent those who feel reluctant from hacking their hard earned bought consoles from hacking them. I concur with this development as am gonna look up my library to see games I could give out

Bump

Morning

Bump

If you have changed all that and you are still getting same result I suggest you give it out to a competent technician

Its very abnormal to have your check engine light on or fluctuate. If it fluctuates its more hazardous. To be on a safe side run a comprehensive scan that can scan all components on your vehicle. Less I forget no details of car

Guess he is talkn about it in addition to installation. Find out first

Run a comprehensive scan that would scan all modules on your vehicle. I.e all components on your car. This would pinpoint what exactly nis wrong with the car. Call this number to run a scan. 08165520837 or 08156087872. Bb pin is 7BE1C522

Yes you should be able to get, any problem with your baby mama? ?

You have changed a whole lot in your car. Water temperature sensor would never produce a problem like this. Guess you are still scared of having the car checked upon

I want to believe you have the check engine light on on your instrument cluster. If you do run a scan first to pinpoint the exact cause of excessive fuel consumption. There are a whole lot in car that could lead to high fuel consumption. So pls run a scan first

Follow Gazzuz's advice

No details of car

The bank1 sensor is located in the engine bay almostbat the tip of the exhaust manifold that connects to the engine. When you open your bonnet check for something that looks similar to a spark plug attached with a wire.

As for bank 1 sensor 2. Check underneath the car. That same sensor also runs along the exhaust.

Bump!!!