Having heard your story and also experienced it but succeeded in the end. My little advice to you and others out there is to learn a skill, the real world in the labour market is gradually tilting towards skilled labour than paper qualification and it's an added bonus for graduates/job seekers. Instead of spending money acquiring paper qualification e.g NEBOSH & co. put that money into good use in acquiring a skill/trade. e.g welding & fabrication, Furniture making, Aluminium, draughtsman hope i got that spelling right, it's not a must u should be employed so take out time to think re-plan, my humble opinion..

IT CAN'T BE FIXED AND EVEN IF ITS FINALLY DONE SOME HOW, THE STRUCTURAL DAMAGE TO THE FRAME WILL ALWAYS BE VISIBLE ONE WAY OR THE OTHER. E.G A SITUATION WHERE THE END PART OF THE CAR SEEMS TO BE MOVING IN THE OPPOSITE DIRECTION/SIDEWAYS WHEN THE CAR IS IN MOTION AND CAN LEAD TO SERIOUS ACCIDENT AGAIN WHEN ON TOP SPEED... SUMMARY CAR FRAME IS COMPROMISED!!!

Simply get coconut, tigernuts & date palm/nuts all these u can get from those mallams pushing a wheelbarrow. Soak date palm/nut for awhile so as to be able to soften n remove its nut. Put all together n blend adding a bit of water, serve chilled once a day n watch ur husband become a bedroom Taliban n its 100% natural..

obitryce98@yahoo.com thanks

still can't reach u on the contact number u posted. Luv to talk and see how we could work something out thanks

Wish you were in PH, really would have loved to buy these off your hands immediately!! Your number ain't available..

contact Oroz on Nairaland, he's PH based and offers such service you are looking for.

I recently got a mail from a UAE based company about a Job opening and that they got my cv through a job site i registered and they took interest. Sent me a questionaire which i filled and emailed back. Recently i got an email from them with a letter of appointment asking me to proceed to a Travel agency to process and get my work permit to enable me resume on the 14th of May and that i will be reimbursed all my expenses made to get my permit once i submit a receipt of all expenses made, that this is to show my level of seriousness about joining them.

Sincerely speaking are they not supposed to be the ones to process and pay for such expenses? just my thoughts and its begining to make me have second tots!!

Any useful advice will be well appreciated thanks.

Oroz good morning & how much is the green corolla?

pls how much are your ball joints for lexus rx330?

Disconnect the Negative terminal of your car battery for 30 seconds and reconnect back. Then try opening the trunk using the remote key.

Another method i think could work with the already dug hole is to get a good carpenter & iron bender to construct the form work of the septic tank for casting and you get a pumping machine to pump out the water from the the already dug hole while the constructed form work of the septic tank is placed in the hole and all sides casted immediately while still maintaining steady pumping out of water from the hole at least for almost the whole day to enable the cast solidify. Just a tot that crossed my mind sha..

Got a neatly used one going for 50K last, Actron CP9580A Enhanced AutoScanner Plus. You could do ur research and if interested hit me up on 08077681911. Location is warri.

Hello please i had my AC Evaporator changed recently due to frequent loss of gas and the technician pressure tested my compressor and pipes before concluding it was my evaporator which had some drops of oil on the body. Ever since the evaporator was replaced, gas refilled my car doesn't chill as before and requires me increasing the fan to 4 to get a good feel. Also dew forms at the bottom of my windscreen despite the face vent and air re-circulation on. Car is a 2005 Lexus RX330.

Take your car to Benchuks Autos along refinery road for scanning/proper diagnosis and servicing.

Contact no. 08064402349

Had the door lining removed and the speakers inspected found one a bit torn, had it replaced. Has a USB like connection Simply disconnect old one and fix the new one.

New speaker na 5k, changed one 2months ago, having my dashboard re-wrapped next week. The guy did a poor job and has agreed to redo it. Also visited my mechanic who checked my drive shaft bearing, re-tightened some screws and also confirmed there's a bit of allowance with the drive shaft as designed which leads to that thud sound some times when it engages the axle/back differential. Confirmed it from anoda Lexus RX330 owner at the workshop.

pls do u have rear shock absorbers (KYB) for lexus RX 330 and how much is it?

Either wrapping or replacement of the dashboard, lexus, murano, infinity dem no put our harsh sun into consideration when dem bin dey produce these cars dashboards

Tot i was the only one experiencing this on my Lexus Rx330. Happens once in awhile, initially i thought it was a loose engine sitting but from my little research it might have to do with a failing center support bearing for the drive shaft . Am also located in warri & would love to know how you get to resolve yours.

Selling Cheap, never been used but pack unsealed.
Includes screen guard n pouch.
Location is warri, call 08077681911.

SOLD!! GOT A 33KVA NEATLY USED & WELL MAINTAINED FG WILSON SOUND PROOF GENERATOR FOR SALE. CALL 08077681911 FOR TALKS!!

2.5?

Sorry about your ordeal but firstly you didn't mention the type of business you do and secondly know your rights. Police has no right to go through your phone.
Kindly find below a 24hr/365 days Police complaints contacts to call immediately, whenever you encounter such situation and have your issue resolved swiftly by well mannered and educated senior officers ciao.

1. 08057000001

2. 08057000002

call this number TODAY 08038757343 for a free scan if u are in warri and around PTI!

very very wrong thinking!!!!

location?

Gave you his contact, all your questions can be answered with a call..

Contact Mr. Tochi on 07063800785 based in warri, refinery road..