₦airaland Forum

Seyilome: Olenyi I have assembling the dish and I will follow ur steps as been given.tanx boss

twinskenny: whos is in Ilorin Please? i need to purchase 90cm dish asap i am new to this area... i will appreciate quick answer

olenyi: First of all couple the dish together (dis might be difficult except u look at ur neighbours already coupled own). Locate ur ''east'' from ur proposed dish mount point (making sure u have a clear line of sight to the horizon up to the sky). Mount ur dish (also looking at ur neighbours own for the exact mount setting)Then fix the metallic f connector at both ends of ur cable. Screw one end to the lnb at the front of the dish. Get an extension box to help bring ur ''mains'' to a point near ur mounted dish. bring out ur tv to the dish point and put it on. Connect ur receiver also to the extension box. Now screw on the other end of the cable to the point at the back panel of ur receiver labeled ''lnb input''. Connect the av wires and put it on also. (IT VERY IMPORTANT U FOLLOW THE SEQUENCE OF MY INSTRUCTIONS.)

press menu on the remote. Press ok. Enter 4 zero's for the pin and scroll down to manual scan. Press ok. Now using the right volume button, start scrolling through the satellites until u get ''astra 1N/2abd. When u get it, scroll down to frequency and using the left volume button now, start lookin for 12.5 something something. When u get it, scroll down to frequency, Press zero and select edit. Enter 12.523. Scroll down to ''symbol rate'' and enter 27042. Change the ''polarization'' to ''v'' if its not so.

Phew!!!!!

If u've gotten to this point, Then u're doing great.

Now go to ur dish. And standing at the back of the dish or hanging from a ladder, (and with ur eyes on the two red signal bars at the top right hand side of ur screen) and with ur lnb positioned in such a way dat the point which u screwed on the cable is at 4 o'clock assuming u have an imaginary clock in ur head. Start raising the dish slowing up, up , up until it's pointing to the sky still with ur eyes on the signal bar for when it will turn to green to indicate u've gotten a signal (remember it should be facing east). Bring it down slowly. Now shift the dish a tiny bit horizontally to the right. (remember u're at the back of the dish)

Take it up up up again and down. Right, up up up and down. Slowly. Keep at it until u hit green or until u get to ur south. If no green. Den start repeating the steps again but this time, shift horizontally to ur left.

When u hit green, adjust the dish a little to maximize the signal percentage and then tighten the 4 screws by the side of th dish and also the ones holding it to the pole arm all this while slowly and wit ur eyes on the signal so dat it doesn't go down.. When this is done, rotate the lnb a little clockwise and a little anticlockwise to get the best position for max signal and tighten.

Hmmm.... Tired now

We're almost dia.

When dis is done, press the ''ok'' button to scan. Afterwards, exit everything until it starts showing at the home screen.

Regards.

olenyi: First of all couple the dish together (dis might be difficult except u look at ur neighbours already coupled own). Locate ur ''east'' from ur proposed dish mount point (making sure u have a clear line of sight to the horizon up to the sky). Mount ur dish (also looking at ur neighbours own for the exact mount setting)Then fix the metallic f connector at both ends of ur cable. Screw one end to the lnb at the front of the dish. Get an extension box to help bring ur ''mains'' to a point near ur mounted dish. bring out ur tv to the dish point and put it on. Connect ur receiver also to the extension box. Now screw on the other end of the cable to the point at the back panel of ur receiver labeled ''lnb input''. Connect the av wires and put it on also. (IT VERY IMPORTANT U FOLLOW THE SEQUENCE OF MY INSTRUCTIONS.)

Now as the receiver is a new one, ''ok'' every option on the screen until u get to the home screen and u see ''no or bad signal'' press menu on the remote. Press ok. Enter 4 zero's for the pin and scroll down to manual scan. Press ok. Now using the right volume button, start scrolling through the satellites until u get ''astra 1N/2abd. When u get it, scroll down to frequency and using the left volume button now, start lookin for 12.5 something something. Press zero when u get it and select edit. Enter 12.523. Scroll down to ''symbol rate'' and enter 27042. Hand the ''polarization'' to ''v'' if its not so.

Phew!!!!!

If u've gotten to this point, Then u're doing great.

Now go to ur dish. And standing at the back of the dish or hanging from a ladder, (and with ur eyes on the two red signal bars at the top right hand side of ur screen) and with ur lnb positioned in such a way dat the point with u screwed on the cable is at 4 o'clock assuming u have an imaginary clock in ur head. Start raising the dish slowing up, up , up until it pointing to the sky still with ur eyes on the signal bar for when it will turn to green to indicate u've gotten a signal (remember it should be facing east). Bring it down slowly. Now shift the dish a tiny bit horizontal to the right. (remember u're at the back of the dish)

Take it up up up again and down. Right, up up up and down. Slowly. Keep at it until u hit green or until u get to ur south. If no green. Den start repeating the steps again but this time, shift horizontally to ur left.

When u hit green, adjust the dish a little to maximize the signal percentage and then tighten the 4 screws by the side of th dish and also the ones holding it to the pole arm all this while slowly and wit ur eyes on the signal so dat it doesn't go down.. When this is done, rotate the lnb a little clockwise and a little anticlockwise to get the best position for max signal and tighten.

Hmmm.... Tired now

We're almost dia.

When dis is done, press the red button to scan. Afterwards, exit everything until it starts showing at the home screen.

Regards.

Oshinmichael: Pls i have strong 4663xii and a 60cm dish .pls how can i use it to track joytv?

olenyi: First of all couple the dish together (dis might be difficult except u look at ur neighbours already coupled own). Locate ur ''east'' from ur proposed dish mount point (making sure u have a clear line of sight to the horizon up to the sky). Mount ur dish (also looking at ur neighbours own for the exact mount setting)Then fix the metallic f connector at both ends of ur cable. Screw one end to the lnb at the front of the dish. Get an extension box to help bring ur ''mains'' to a point near ur mounted dish. bring out ur tv to the dish point and put it on. Connect ur receiver also to the extension box. Now screw on the other end of the cable to the point at the back panel of ur receiver labeled ''lnb input''. Connect the av wires and put it on also. (IT VERY IMPORTANT U FOLLOW THE SEQUENCE OF MY INSTRUCTIONS.)

press menu on the remote. Press ok. Enter 4 zero's for the pin and scroll down to manual scan. Press ok. Now using the right volume button, start scrolling through the satellites until u get ''astra 1N/2abd. When u get it, scroll down to frequency and using the left volume button now, start lookin for 12.5 something something. When u get it, scroll down to frequency, Press zero and select edit. Enter 12.523. Scroll down to ''symbol rate'' and enter 19531. Change the ''polarization'' to ''v'' if its not so.

Phew!!!!!

If u've gotten to this point, Then u're doing great.

Now go to ur dish. And standing at the back of the dish or hanging from a ladder, (and with ur eyes on the two red signal bars at the top right hand side of ur screen) and with ur lnb positioned in such a way dat the point which u screwed on the cable is at 4 o'clock assuming u have an imaginary clock in ur head. Start raising the dish slowing up, up , up until it's pointing to the sky still with ur eyes on the signal bar for when it will turn to green to indicate u've gotten a signal (remember it should be facing east). Bring it down slowly. Now shift the dish a tiny bit horizontally to the right. (remember u're at the back of the dish)

Take it up up up again and down. Right, up up up and down. Slowly. Keep at it until u hit green or until u get to ur south. If no green. Den start repeating the steps again but this time, shift horizontally to ur left.

When u hit green, adjust the dish a little to maximize the signal percentage and then tighten the 4 screws by the side of th dish and also the ones holding it to the pole arm all this while slowly and wit ur eyes on the signal so dat it doesn't go down.. When this is done, rotate the lnb a little clockwise and a little anticlockwise to get the best position for max signal and tighten.

Hmmm.... Tired now

We're almost dia.

When dis is done, press the ''ok'' button to scan. Afterwards, exit everything until it starts showing at the home screen.

Regards.

TOLULOPE 1: How can ℓ̊ make infinity signal stable on
my Strong Decoder 4669XII Box..
Plz,ℓ̊ need help Frm U̶̲̥̅̊‎ gurus in d House.

Edox4: thanks bro.still on astra 2ab or has it change

SULIEMAN3: .
3. Yes, middle east softwares are peculiar to us, you can get them from wizkid files.
Regards.

ebenz4: @baodu. Dat is d software am using currently on my stb

Boadu: But does the middle East one work the same way as the Africa one? Is the middle East one not meant for middle East alone? Answer pls. The OTA software from mytv solves this infinity problem. But it also make you lose the Bis key feature. Problem oo.

ebenz4: Olenyi plz help me.. Wat soft can ℓ̊ downlod to my 4669xii to make infinity signal stable... Plz ℓ̊ beg U̶̲̥̅̊‎ ℓ̊ need ur reply

odilibe: @all..i may work on my mesh dish today...which mbc2 on w4 is it mbc2 uae? ...

Jossyboy2580: Pls am sorry 4 asking 2 many questions am a newbie dats y am scared f standing on my table and stil stretching for hours, tnx 4 ur undastanding

SULIEMAN3: Olenyi, good one from you.
actually i hv got an alternate account.
i faced the sentence immediately after i replied to a post posted by a member on "strong reciever thread" the guy was seeking for help in order to resolve the missing option that disappeared from his reciever. u know this has something to do with DARKSIDE. i thought that was the reason i got banned. untill when i thought back about your ealier well explained post, then i beared it as also oga at the top sometimes receives such sentence.
olenyi, Do have a good day. gud 9t.

Billbook: I am in intelsat 7/10 ku band. How will i move my dish to get joy news and the rest? I am in enugu.

Rextab: guys i need fake software for srt 4663x.the one for Hitv isnt working, anyone with a diffrent software pls send it to terinorextab@yahoo.com

SULIEMAN3: More than 42 hrs since yesterday, i was not able to post and qoute in this forum untill now.

Remmyjex: Am hapy to associat wt U my dear,hp 2 learn more frm u.

upright2010: i'm very sorry my oga. Pls don't be annoyed and i promise it wont happen again. U ar alws be my mentor so pardon me . Thanks 4 ur tiredless efforts.

Jossyboy2580: ok bro i'l try it on saturday. Thanks. Wat is d lnb skew my joytv is at 1 o clock and my dstv at 7 o clock, wat is d actual skew incldin d amos, pls dnt be angry dat am over bothering you

Boadu: Hello Gurus, pls I want you to recommend a quality diseqc for me. I've bought three different types of Diseqc, but they all reduce signal quality. Sometimes, the signals go red completely. Pls help me out.

mecussey: I thought TopTV was contesting?