₦airaland Forum

ojtech8291: long life and plenty property.

Thank u so much @ojtech8291

Theloveth: happy birthday mr Olenyi wishing you more of today in good health and wealths.hips hips!

@Theloveth. I really do appreciate. Kindly accept my warm regard.

UncleSmart: happy birthday my Proff Olenyi,
send my own share of the cake to my phone number ooooooo
God will Increase you in all things.
You will achieve more in life.

@unclesmart.

Am most grateful. Regards.

n9jaboy: Happy Birthday Olenyi! Wishing you many more fruit years ahead, and thanks for all your effort on this forum. Enjoy your day!

Thanks @n9jaboy. Wishing u same. Regards.

rapthugx: Oga HBD wish u more fruitful years ahead. God bless u. Abeg I hv been trying to catch ur attention on this, how can I add a 3rd lnb in my set up to get Amos 5. I have DSTV as the pri lnb and multi tv under it. Take a look at the pic. Thank u sir.

[img]http://img1.nairaland.com/attachments/1209386_my_set_up_jpg325ee4a811daa7cb0c51d7b55fc3f53c[/img]


U could attach another lnb under the multi lnb using a flat metal bar or anything to hold it in place. But u'll have to place it a little to the right of the lnb arm while standing in front of the dish.

Or better still, make Amos ur primary to ensure max signal for daarsat signal, then attach multi tv on top, den Dstv on top of multitv. (the two lnb's on top should lean a little to the left of each other and the primary lnb while u're in front of the dish.)

Regards.

Abass4real: Master of d Gurus wishing u d best in d 4th coming yrs HBD LLNPP

Thank u my dear @Abass4real. My warm regards.

rapthugx: My man how can I add a 3rd lnb to my set up
to get amos 5. I have DSTV as my pri lnb and another for multitv.
Pls label ur lnb the top one shld be Amos? Thank you

This here will help u better.


https://www.nairaland.com/847865/tips-how-track-w4-36e

Regards.

Omoakin5: Hbd olenyi more happy return

@Omoakin.

I do appreciate. My warm regards.

lakeside3020: Sir happy buffday wishing my coach a prosperous years ahead
With regards

@lakeside3020. Thank you. Am most grateful.

Boadu: Happy happy birthday to you sir! May you live to achieve greater things in life!!! I'm coming with my knife, so pls reserve the CAKE-cutting for me!!!

Thank u @Boadu. U needn't come with knife. The cake is already before u. So dig in.

https://www.nairaland.com/icons/birthday_cake.gif

naijaobi: HAPPY BIRTHDAY PROF OLENYI...
I wish you 500 years more...

Thank u @ naijaboi. But 500 years? Na. Not for me Abeg. Wouldn't like to be a burden to others if u get what I mean.

Regards.

@All.

It hasn't been easy. But it has all been sweet, worthwhile and all made possible by the ALMIGHTY HIMSELF.

This is wishing myself a most blessed and pleasant birthday celebration and a blessing filled future. Cheers.


https://www.nairaland.com/icons/birthday_cake.gif

Rhemite: Greetings Everyone, i told my installer to put my Dstv, Amos 5 and multi tv(joy tv) on my 90cm Dish and help nailed NSS7 FOR THE OTHER 60CM DISH. But he said that the 90cm dish can not be used but that we should get 1m dish for that. Is that a True Or can The 90cm be able to do the same work cos i don't want to waste fund. Also is there any other SAT he can Add to those three cos sometimes ago some talk about putting 5 of THEM on one Dish. Kindly Help ME Everyone cos am still on a Learning Process in Terms OF FTA. Thanks

Just like @fairchild said, its more than possible. I've come to realise that most installers who do exploits in FTA are all members of this forum. Any other person not here tend to find it difficult doing what we all take here as granted.

And that's how it should be. Dia should be a difference between us and others.

@Rhemite, show him dis as a reference.

Regards.

Malix: olenyi,pls check ur mailbox,i ve sent u a mail

Replied.

Regards.

Boadu: @ Prof Olenyi&Hon Ogojohn, I appreciate your explanations. I'm most grateful. Please one more thing: is there any particular feature which 4922A possesses that 4922 lacks?

4922 = no RF out
4922A = with RF out

Regards.

.

Boadu: Oooh I can't even find words to express my gratitudes to Prof Olenyi. Many many thanks sir! I'm very grateful for given me that detailed steps on how I can connect srt4922A to two TV sets!!!" Actually, we have srt4669XII, srt4330 in our house already. I bought this 4922A just this afternoon. Because according my dealer, this srt 4922A is the decoder we can use to connect TWO tv sets. Please I need a brief answer from you sir. Could we have used the other two decoders to connect to two tv sets? If prof Olenyi or any other Guru is around notify them of my post. Thanks

Of course. The two former could have done the job for u. Note; any receiver or electronics with ''RF out'' port at the back can connect two tv's. But it's the same channel that the two tv's will be showing. The channels will be controlled from the receiver.

Even receiver's or electronics without ''RF out'' port can still be made to connect two tv's if u purchase an ''AV to RF converter/modulator'' from ur electronics dealer (quite cheap for the basic one's).

I'll advise u get a ''dual view'' lnb and use it to replace ur current lnb . So u can connect the 4669x with the second tv to give u more versatility so the second tv can be independent of the first one and the channels can be changed as desired.

Regards.

Boadu: Hello mr olenyi,Obnelly and other Gurus, please I just bought strong 4922A.I am told this decoder can be used to connect to two televisions. please I want one Guru to show me how I can go about it. please Gurus,teach me the way to go.

Go to ur electronics accessories dealer and request for one iron tv plug - male and one female, two f-connector, coaxial wire (long enough to get to the second tv from the back of the receiver)

Now with the help of one f connector and the female tv plug, connect the cable to the RF-out port at the back of the receiver. Connect the other end to the antenna port of ur tv with the help of the other f connector and the male tv plug.

Put on the receiver and auto/manual scan ur second tv. The channel should pop up.

Regards.

Lol

staddos: Thanks Olenyi for your help. After doing all that you requested me to do I still had ER-2 showing on the G box.Finally I had to go for a new actuator (motor). On close examination of the two motor I realised that the inner tube and ball bearing of the old motor was not as firm as the new one I had picked from a friends shop.I suspected the the problem was from the motor. I replaced the motor with a new one and the Error message Er-2 disappeared and the 2.4m pan dish was dancing sweetly from East to West hunting for birds.Keeping the old motor as a back up for its electrical parts.

Glad ur dish is back in operation. Was worth the try sha.

Regards.