₦airaland Forum

adubam:
If you are buying foreign used and stick to routine maintenance with the right fluid you will not have issue with transmission.

Alright Thank you

kadbus:
pls i need solutions to my 406 that is consuming a lot of fuel pls

F=Did you solve the high fuel consumption of your 406? if yes, how did you resolved it

wisesystem:
Hope we all had a pleasant weekend. I did.
Its been about 5days now since I reported some issues my car was having(misfiring and engine stalling), ended up running a global scan on my lion using my Mech's PP2000 which revealed as it did the last time I scanned that my lion's lower lamba O2SENSOR was faulty. I had always thought that the only effect a bad o2sensor had to do with increased fuel consumption and so even when I agreed to get a new O2SENSOR courtesy of the scan result,I still wasnt convinced I would be seeing the end of the engine misfire and stalling soon. Well, we changed the lower lamba O2sensor and that was the end of the problem!! Still wielding in disbelief, I went online to learn more about SYMPTOMS OF A FAILED O2SENSOR and was amazed at the things a faulty O2sensor can accomplish: Engine Missing; Engine Pinging; Rough Idle; Increased Fuel Emissions.

My experience also taught me the usefulness of scanning a car for issues, most road side mechs know little about the effect of little parts like sensors on a car, most of them wanted to either 'service the car nozzle' or check the fuel pump. Thanks to the pp2000 the changing of a lowly sensor did the magic! So once again and like Ikenna would say a pp2000 is a must have for all lion owners. My story ends.

Did changing the 02 sensor solved the high fuel consumption? pls reply

Please Fellow Peugeot users, how often do I change my car timing belt (Peugeot 206)? Somebody advise that I should change it yearly regardless of whether there's any wear sign. The last time I changed it was April last year when it has almost cut...

Nafizzey:
Please Fellow Peugeot users, how often do I change my car timing belt (Peugeot 206)? Somebody advise that I should change it yearly regardless of whether there's any wear sign. The last time I changed it was April last year when it has almost cut...

If you can get OEM timing belt and roller(s) that should take you for 4years or 80,000km….even PAN this day don't really have good belts like gates and dayco. The last belt i got from PAN for EW10 was not gate or dayco and i was told to change after 50,000km.Exchange rate has made price of replacement parts very expensive…as for 206 engine(TU3 i guess)get the OEM belt from PAN or any reliable source.

Please can any one recommend a good Peugeot mechanic in Port Harcourt. Thanks .

gambus007:
If you can get OEM timing belt and roller(s) that should take you for 4years or 80,000km….even PAN this day don't really have good belts like gates and dayco. The last belt i got from PAN for EW10 was not gate or dayco and i was told to change after 50,000km.Exchange rate has made price of replacement parts very expensive…as for 206 engine(TU3 i guess)get the OEM belt from PAN or any reliable source.

thanks pls like how much do I budget for that?

Nafizzey:
thanks pls like how much do I budget for that?

call this number 07067534003 he is PAN official sales representative. You need to be patient with him..busy man.

Please Car gurus here I need your input here, my Car 206 check engine light has been blinking for days now from Tuesday precisely, though I don't feel any changes from the car making me surprise what could be wrong. I call my mechanic to explain he said since the car is still moving fine, I should manage to weekend when he returns from Sallah break.

I hope there's no danger in still moving with the car though i don't do long distance, just office and work? from experience Car gurus here please Gazzuzz

Can you scan
(

Nafizzey:
Please Car gurus here I need your input here, my Car 206 check engine light has been blinking for days now from Tuesday precisely, though I don't feel any changes from the car making me surprise what could be wrong. I call my mechanic to explain he said since the car is still moving fine, I should manage to weekend when he returns from Sallah break.

I hope there's no danger in still moving with the car though i don't do long distance, just office and work? from experience Car gurus here please Gazzuzz

OkoroPeugeot:
Can you scan
(

No I don't have scanner

Good day Gentlemen. My peugeot 307 is having faulty which i couldn’t detect the problem up till now, the problems are below:

If i start the car it will start but will not respond even when you press the accelerator.

Secondly, as it is on it will be giving one sound like tht big grinding Engine “pubb pubb pubb pubb” pls who has any idea about it?

aleeyu200:
Good day Gentlemen. My peugeot 307 is having faulty which i couldn’t detect the problem up till now, the problems are below:

If i start the car it will start but will not respond even when you press the accelerator.

Secondly, as it is on it will be giving one sound like tht big grinding Engine “pubb pubb pubb pubb” pls who has any idea about it?

Please go and scan your car. Stop guess work.

Greetings everyone. My vehicle (Peugeot 406) have some AC issues. When the AC is on, only the air vents on the passenger side will be chilling while the 2 air vents on the driver's side are not.
What could be the problem and how can it be resolved? I have visited several AC technicians and they seem clueless about the issue.
Pls help a brother.

God evening great minds. I recently bought a peugeot 206 from a friend. I discovered that the radiator fan is connected directly Invariably indicating that the thermostat has been tempered with.
My question is can I buy a thermostat and install without having issues with the car?

nomaison:
God evening great minds. I recently bought a peugeot 206 from a friend. I discovered that the radiator fan is connected directly Invariably indicating that the thermostat has been tempered with.
My question is can I buy a thermostat and install without having issues with the car?

yes, you can, but d thermostat might have being removed, probably d resistor that controls fan speed in front of d car got spoiled (happens sometimes)...instead of buying & fixing it, d kazeem electricians just connect d fan directe, d worst ones even remove d thermostat while doing d connection...Pp2000 can show if d resistor has spoiled as it would log an error dat shows radiator fan slow speed isn't available & u have bypassed d fan

Elsueno:
yes, you can, but d thermostat might have being removed, probably d resistor that controls fan speed in front of d car got spoiled (happens sometimes)...instead of buying & fixing it, d kazeem electricians just connect d fan directe, d worst ones even remove d thermostat while doing d connection...Pp2000 can show if d resistor has spoiled as it would log an error dat shows radiator fan slow speed isn't available & u have bypassed d fan

Thanks alot

Hello house,
Please how much is OEM timing belt for 307 now? Is it true that OEM (PAN) timing belt for 307 are no longer in stock? If true, which other brands can I buy that has a quality close to that from OEM?
Thanks in anticipation.

Good day, Peugeot Lovers

Pls I would like to know, how much for an OEM speed sensor (3pin) for a 206.

I was told by a mechanic it's 8k. How true is this?

Pls guys, my Peugeot 206 fuel consumption is killing me. My thermostat is working perfectly and I have restored my fan back to factory setting. The only thing I’ve noticed now is that when I start it in the morning the rpm needle fluctuates until the engine is warm. I’ve spent a lot trying sort out this issue but nothing yet. The mechanics are confused as well. I even bought new injectors and no improvement

Martinss4140:
Pls guys, my Peugeot 206 fuel consumption is killing me. My thermostat is working perfectly and I have restored my fan back to factory setting. The only thing I’ve noticed now is that when I start it in the morning the rpm needle fluctuates until the engine is warm. I’ve spent a lot trying sort out this issue but nothing yet. The mechanics are confused as well. I even bought new injectors and no improvement

Sorry about your car issue but why did you change your injectors? did you run scan to know if it got fault code?Take you car to a good PEUGOET Mechanic or get someone who has Peugeot specific scanner and paste the fault code(s) here.

gambus007:
Sorry about your car issue but why did you change your injectors? did you run scan to know if it got fault code?Take you car to a good PEUGOET Mechanic or get someone who has Peugeot specific scanner and paste the fault code(s) here.

It was what my electrician told me. I still have the old injectors. I kept them. They said that the one in my engine had something like a 4 point sprayer and they changed it to one with a 1 point spray according to them. No improvement yet. I’ll find a person with a scanner in Benin here. If you by chance know anyone in Benin, I’d love suggestions. Thanks

Solomonmartins6:
It was what my electrician told me. I still have the old injectors. I kept them. They said that the one in my engine had something like a 4 point sprayer and they changed it to one with a 1 point spray according to them. No improvement yet. I’ll find a person with a scanner in Benin here. If you by chance know anyone in Benin, I’d love suggestions. Thanks

Serious abuse on that car….You need to get that car scanned.

gambus007:
Serious abuse on that car….You need to get that car scanned.

I finally got it scanned and it was discovered that my oxygen sensor wire had been cut and then the scan also revealed an idle air control valve issue. Will go and get a new oxygen sensor as soon as possible. I’ve learned my lesson. I’ll never let Mechanics guess work on the vehicle again. I don’t know if I should fix back my old injectors but the new ones seem to be working fine.

Solomonmartins6:
I finally got it scanned and it was discovered that my oxygen sensor wire had been cut and then the scan also revealed an idle air control valve issue. Will go and get a new oxygen sensor as soon as possible. I’ve learned my lesson. I’ll never let Mechanics guess work on the vehicle again. I don’t know if I should fix back my old injectors but the new ones seem to be working fine.

If you are sure that the current injectors are for your car, no qualms but if not, return to the previous injectors asap.

gambus007:
If you are sure that the current injectors are for your car, no qualms but if not, return to the previous injectors asap.

I got a new O2 sensor installed and so far, the consumption has been very low. Unlike before. I’m still observing the car tho. The places I went to in a day, ordinarily my fuel gauge would have dropped but so far it’s been okay. I’m no longer going to do guess work on my vehicle when it concerns the car. Will soon place an order for my personal scan machine. I’m grateful guys. This platform has been more than helpful

Solomonmartins6:
I got a new O2 sensor installed and so far, the consumption has been very low. Unlike before. I’m still observing the car tho. The places I went to in a day, ordinarily my fuel gauge would have dropped but so far it’s been okay. I’m no longer going to do guess work on my vehicle when it concerns the car. Will soon place an order for my personal scan machine. I’m grateful guys. This platform has been more than helpful

Good

Since I restored my thermostat and cooling fan back to factory setting. My fan kicks in about 97c and goes off at about 92c. And after a long drive, when I restart my car, the temperature gauge goes to about 100 and the fan comes on till it drops to about 92c. Is this normal?

@gambus007


Good day house, I reside in Lagos , please my 307 has been giving me issues. It doesn't fire well.

I have changed fuel pump , same thing , cleaned nozzles same.

Who knows any Peugeot Mechanic on mainland thanks.

omobaroja:
@gambus007


Good day house, I reside in Lagos , please my 307 has been giving me issues. It doesn't fire well.

I have changed fuel pump , same thing , cleaned nozzles same.

Who knows any Peugeot Mechanic on mainland thanks.

07034704942(Hamed) call him.

gambus007:
07034704942(Hamed) call him.

thanks

Good evening everyone, please where can I get clean tokunbo Peugeot 406 Automatic transmission with EW10J4 engine? I could have preferred the the Manual because Alot of people are recommending it, But i no like stress Abeg infact i don't know how to drive a stick shift