AshipaEk0:

Stop SPAMMING because of Gotv ogbeni.
Compose yourself
Use this one

krasican:
Please who sells HDMI splitter in onitsha

Ameboperoo:

It will work. Another way is to use av splitter.

dammywapes:
Thanks so much sir , this is also what one TV repairer told me after no early reply here. you know it's viewing center d av cord ave to be extended so i bought flexible wire to extend d av cord hope it will work cos i will b using it on sunday to show Chelsea match

abohwun:
If I understand him well he has more than one lnb on a disecq which he wants to share and it is not possible to my understanding. Using a splinter will enable him to share one lnb per splitter and the boxes must be on the same tp/polarization when viewing if not it will not work, I stand to be corrected.

pryncipal:
Yes it is possible.
First get a Eurobox spliter, connect your lnb cable to the port mark in, then connect your decoder a to one of the port marked out , Finally the other decoder to the second port also marked out, In the event of Diseqc switch take the second cable to the port of your Diseqc switch of the other decoder if you are running a multiple lnbs You can chart me up if you encounter any issues.

rapthugx:


Buy AV plug n AV wire of the required lent in addition to the AV splitter plug I mentioned earlier. Go to a good shop that sells satellite dishes n cables they should have these items. Good luck.

Rajman45:

Thanks bros...... But the two TVs are not close to each other. One in parlor, when the other one is in the bedroom

rapthugx:

Sorry I can't help you on the number of channels or scrambled part. To connect the decoder to two TV sets, buy AV splitter plugs (see pictures below) insert them into the av ports of the decoder n connect with AV cables to the TV sets.

Rajman45:
Gurus in the house, am trying to connect my two TVs with a trends TV Decoder, but it's not working. I'm getting about 11 channels (mbc, bbc, etc), which i think am not suppose to and there are all showing scrambled. What can i do to solve this problem. It's the latest trends TV Decoder and it no place for RF out or in.... Am only seeing DVB T2, DVB C, and DVB S2 as ports. The incoming antenna is connected to DVB T2

Everfrank:

1. Signal is transmitted via rf so decoders must have rf out port. A modulator must be used for decoders without rf out port.
2. If you can afford use a modulator per decoder for all the decoders for better video quality. A modulator converts AV video into rf video.
3. Take video with coaxial cable from rf out port, or from modulator, of each decoder to a combiner. A good splitter used in reverse will do. Assuming you have 16 decoders to shoot 16 channels you can use 5 pieces of new 4-way splitters. Using coaxial cable:
- connect one splitter to the signal-in of your mixing booster in reverse order. A 42db alcad booster or a 20db telavees booster will do.
-then connect your four remaining splitters to the four points on the first splitter also in reverse order. That will give you 4×4=16 points where you'll fix(mix) your signal inputs from 16 decoders, or from modulators as the case may be.
Mixing of decoders is a task that requires patience and time. It's easier if you are using modulators. Those akewu astel modulators of 4k each will do just fine.
Below mixing guideline is without modulator.
- get a good tv with functioning remote control preferably LG. LG displays the number of each rf channel on the screen for easy mixing.
- connect one coaxial cable line from your mixing booster output to the rf in at the back of your nearby tv- with a tv plug.
- your decoders are to be mixed in one after the other. On the TV rf system the channels start from 21 up.
You'll need a female tv plug for each decoder. Buy the iron type. A pack of f-connectors and one good AV wire. Mixing is after all your 16 decoders are functional with their signals and are showing your desired channels.
1. Power on your first decoder and connect it to the TV using the AV wire.
2. With the decoder remote press menu and enter system setting. Scroll down and select UHF and change the number to 21. Save and exit.
3. Change the tv input from AV to RF.
4. Use d tv remote and enter menu of then setting and search the tv. If you are very conversant with searching tvs then use manual search as its flexible and faster for mixing work. Otherwise select auto search and wait.
4. After searching then your first decoder will appear on the TV as channel one(with uhf number 21).
5. Then check the video for clarity. You may need to adjust the gain of your booster to get optimum video quality.
6. After your channel one is satisfactorily clear then you repeat step 1 to 4 for each decoder to mixed them.
7. The catch here is that each decoder must be on different uhf channel. As channel 21 is your first decoder put the second one at 23, the third one at 25, the fourth one at 27, the fifth one at 29 and so on. The rule is as you start with an odd number then use odd numbers for all decoders. Ditto for even numbers. This gives a gap of one number between d decoders to prevent jamming and interference.
You'll have to be patient as some decoder will outshine others. This is because you are using assorted decoders with different clarity strength. It's better to place decoders with the sharpest video last and vice versa.
After all your decoders are mixed harmoniously then you shoot your signal out. It can reach 100 meters then boost it and continue.

There will be more hints for anybody that has reached this stage. Just ask questions.

pryncipal:
For you to connect two diseqc switchs you will need a 22k switch (splitter), that will enable you to combine both switchs, or an 8 way diseqc switch is another option.

Profchicky:
Please I need someone to help me explain how I can connect two diseqc switches (8-LNBS) to the Decoder. .

logonlaredo:


read this searched page/pages
www.nairaland.com/search?q=splitter&board=58

iliyande:
house please I need your help......
what do I need to connect my GoTv to 2 television?

Chinedu7:

Save your money, no need to buy any box that can spoil tomorrow, just get yourself 3 av splitters, 6 av heads buy 2 in 1 cable, run it and have better pictures than through RF. AV splitter is about #100 each, AV heads #20 each and the cable should be 3x of the yards that will take you to the room. It's cheaper and more durable and you can split for more rooms if you want.

Pictured: AV splitter

Chinedu7:

Save your money, no need to buy any box that can spoil tomorrow, just get yourself 3 av splitters, 6 av heads buy 2 in 1 cable, run it and have better pictures than through RF. AV splitter is about #100 each, AV heads #20 each and the cable should be 3x of the yards that will take you to the room. It's cheaper and more durable and you can split for more rooms if you want.

Pictured: AV splitter

lincolnola:
Gurus,

Pls, how do I connect my 4922 decoder to another TV in the room as it doesn't have RF out?
Thanks for response.

Chinedu7:

Bros, your best option is still through RF but you must make sure that the DVD and Startime have RF output, if they do then you are close. Now visit the menu of the decoders and the DVD look for RF output channel of all the boxes, select numbers that are reasonably far from the other. Like no1 - 10, no2 - 15, no3 - 20, this is just to avoid clash. Of course before selecting the channel numbers you should first connect the 3 RFs in one 4-in-1 or 8-in-1 combiner, anyone based on number of channels you wish to combine. Now, for clearer pictures you may need RF amplifier to boost the signal. Once this is done, now you need splitter to split into the rooms of your choice and auto-search the 10 televisions. Note: you can use 16-in-1 or 4-in-1 splitter multiple times.

Omoakin5:
good day house.I need help oooo.I want to send DVD,gotv and Startime to 10 room,I have got gotv through rf but Startime and DVD is not showing. I have buy av to rf converter and signal booster .I use d av converter for d DVD and Startime still am unable to get DVD and startime to the room.my question is what did I need to buy to make d three signal work in all d room.pls my people oooo@oleniyi,chinnedu and all d guru

paulowas:

pls Bros,i ve a couple of quetions for you;1 can i receive measat@91.5e here in naija? 2 how can i enter cccam and biss menu in alpha box ?3 can i use two way splitter to combine two lnbfs to one port of diseqc switch?thanks!

blexxonmak:
MTN Worlwide TV (4132 R /DVB-S2 MPEG-4/ 11250-2/3 QPSK) on NSS-12 @ 57E. Regards

mosescollon:
Yes. use dual LNB or use splitter.

mosescollon:
Yes. use dual LNB or use splitter.

Boss44:
Please house... Can i install 2 strong SRT 4950 on One dish of 90 cm ?

Everfrank:

1. Signal is transmitted via rf so decoders must have rf out port. A modulator must be used for decoders without rf out port.
2. If you can afford use a modulator per decoder for all the decoders for better video quality. A modulator converts AV video into rf video.
3. Take video with coaxial cable from rf out port, or from modulator, of each decoder to a combiner. A good splitter used in reverse will do. Assuming you have 16 decoders to shoot 16 channels you can use 5 pieces of new 4-way splitters. Using coaxial cable:
- connect one splitter to the signal-in of your mixing booster in reverse order. A 42db alcad booster or a 20db telavees booster will do.
-then connect your four remaining splitters to the four points on the first splitter also in reverse order. That will give you 4×4=16 points where you'll fix(mix) your signal inputs from 16 decoders, or from modulators as the case may be.
Mixing of decoders is a task that requires patience and time. It's easier if you are using modulators. Those akewu astel modulators of 4k each will do just fine.
Below mixing guideline is without modulator.
- get a good tv with functioning remote control preferably LG. LG displays the number of each rf channel on the screen for easy mixing.
- connect one coaxial cable line from your mixing booster output to the rf in at the back of your nearby tv- with a tv plug.
- your decoders are to be mixed in one after the other. On the TV rf system the channels start from 21 up.
You'll need a female tv plug for each decoder. Buy the iron type. A pack of f-connectors and one good AV wire. Mixing is after all your 16 decoders are functional with their signals and are showing your desired channels.
1. Power on your first decoder and connect it to the TV using the AV wire.
2. With the decoder remote press menu and enter system setting. Scroll down and select UHF and change the number to 21. Save and exit.
3. Change the tv input from AV to RF.
4. Use d tv remote and enter menu of then setting and search the tv. If you are very conversant with searching tvs then use manual search as its flexible and faster for mixing work. Otherwise select auto search and wait.
4. After searching then your first decoder will appear on the TV as channel one(with uhf number 21).
5. Then check the video for clarity. You may need to adjust the gain of your booster to get optimum video quality.
6. After your channel one is satisfactorily clear then you repeat step 1 to 4 for each decoder to mixed them.
7. The catch here is that each decoder must be on different uhf channel. As channel 21 is your first decoder put the second one at 23, the third one at 25, the fourth one at 27, the fifth one at 29 and so on. The rule is as you start with an odd number then use odd numbers for all decoders. Ditto for even numbers. This gives a gap of one number between d decoders to prevent jamming and interference.
You'll have to be patient as some decoder will outshine others. This is because you are using assorted decoders with different clarity strength. It's better to place decoders with the sharpest video last and vice versa.
After all your decoders are mixed harmoniously then you shoot your signal out. It can reach 100 meters then boost it and continue.

There will be more hints for anybody that has reached this stage. Just ask questions.

Everfrank:

1. Signal is transmitted via rf so decoders must have rf out port. A modulator must be used for decoders without rf out port.
2. If you can afford use a modulator per decoder for all the decoders for better video quality. A modulator converts AV video into rf video.
3. Take video with coaxial cable from rf out port, or from modulator, of each decoder to a combiner. A good splitter used in reverse will do. Assuming you have 16 decoders to shoot 16 channels you can use 5 pieces of new 4-way splitters. Using short short coaxial cable:
- connect one splitter to the signal-in of your mixing booster in reverse order. A 42db alcad booster or a 20db telavees booster will do.
-then connect your four remaining splitters to the four points on the first splitter also in reverse order. That will give you 4×4=16 points where you'll fix(mix) your signal inputs from 16 decoders, or from modulators as the case may be.
Mixing of decoders is a task that requires patience and time. It's easier if you are using a modulator. Those akewu astel modulators of 4k each will do just fine.
Below mixing guideline is without modulator.
- get a good tv with functioning remote control preferably LG. LG displays the number of each rf channel on the screen for easy mixing.
- connect one coaxial cable line from your mixing booster output to the rf in at the back of your nearby tv- with a tv plug.
- your decoders are to be mixed in one after the other. On the TV rf system the channels start from 21 up 79 I think.
You'll need a female tv plug for each decoder. Buy the iron type. A pack of f-connectors and one good AV wire. Mixing is after all your 16 decoders are functional with their signals and are showing your desired channels.
1. Power on your first decoder and connect it to the TV using the AV wire.
2. With the decoder remote press menu

ohiza:
Hugman let me ask U something, start from the decoders,what next after decoder den after stage by stage until the last stage of transmission...Thanks

hugman:
Casual sketch
1. From decoder RF to combiner
2.from combiner to splitter
3. RF booster in every 100 meter
4..........