₦airaland Forum

Nigerian Immigration is the most corrupt govt agency. Contactless has become contactful and of course with contactful, bribe ensues. If you do it yourself they will use everything possible to frustrate you. Bunch of retards

Ivoryred:
is not up to 1 week, but before it was approved, they requested a document from me, which I had to upload and within space of 2hrs, it was vetted.

For the documents= I used national population certificate ( used for travelling out of the country) and my local government certificate gotten from liaison office in Victoria Island. Your vetted print out and payment receipt. All in original copies and photos copies too.


Yesterday made it 8weeks after capturing.. still waiting for it to be out. Finger crossed 🤞


Which state and office did you choose?

Thanks for replying.
I chose Benin, i thought you did yours in Benin.

Please, i didn't get you correctly. Does it mean they emailed you and asked for the document or did you go to the center to make enquiry?
Mine is approaching 3 weeks since i paid, yet still not approved.

Is local govt of origin compulsory?

Ivoryred:
yes. Thank you

Please long did it take it to be approved. Mine is still waiting for approval and today was suppose to be my appointment.
What documents did you go with?

Many thanks

Please how did you guys resolve yours. I'm having same issue

oluplus:
Guarantors' form is not required. I have captured.

Did you pay the 7k?

Ivoryred:
Hello everyone, good morning

Can I change my sister passport office from Edo state to Lagos state?

For one month now, they have not approve my sister passport application to (vetted) because we thought Benin City will be faster than Lagos since she stays in Edo state.


I choose Lagos for my capturing, mine was so fast, and capturing done since 2weeks. Am currently thinking of changing it to Lagos, so that she can come over to Lagos and do it.

Has your sister been captured?

Kingdavid579:
Glamstar is new to the market, very very new.. U fit buy and drop reviews later if you want to taste something new.

I have bought it, it's ok but the only problem i have is inability to set the timer to less than 6 hours

Who has used Glamstar AC. Please what's your review?
Secondly, i got this Glamstar inverter AC. The issue i have is how to set the timer, that's such that it will turn off by itself. What i see in the remote is 6hours. Is it that i don't know how to set it or that's the minimum it can run before it goes off?
There's not much on glamstar online, hence my coming here. Thanks

Adonike:
I love Akwa Ibom state so much.. U need to see how that place was couple of years ago!
As a Corp member in 2016/2017, I remember how we use to do our CDS meeting inside the hospital n that was when the renovations kicked off. Nice work done so far!!!

Kudos to the governor n people of AKS..
I missed Adadia Beach Market..
Ekpene Ukim..
Ituk Mbang!
Nung Udoe!!
Ikot Itie Udong!!
Nung Ukono Ufok!!
Idu!!
Ibiaku!!

God bless my NYSC Uruan LGI; Mrs Uduak-Obong Andy.

Imagine how it was when i served there in 2009. No light, no water, over grown with bush, ancient structures. We use to go to the ravine to fetch water. I'm so happy it has taken a new look

zaynie:
Are you back mama?
Make I quick run for you o!. Cos 2015 we rock this place together.
2018 we carry belle together!
I have to avoid you if you're pregnant make you no go infect me 😂

You sayyyyy? I no back anything o. Was just strolling by
Good ol days! Howz Atinuke? Regards to all

Good evening everyone, saluting all the preggies and the TTCs here.
Any of my old teamies here? Dec 2015/ Feb 2018 set.
FloraEC, zaynie, nnekakie, tatacherie, ahnie, in fact too numerous to mention, i remove headrest for you all.
Have missed this thread, hope the love is still as strong here.
Have a good night rest all ❤️

drmuchin:
THE ONE I BOUGHT HAS NO NAME
IT HAS A GLASS TOP AND COOKS VERY FAST

Does it work with normal aluminium pot?

Darkseid:
Buy the glass type, the one in the first post gave me the kind of shocking that I won't fail to tell my grand children

Can it work with normal aluminum pot?

adeniyi65:
These

Please can this work with aluminium pot or does it need special pot

mountmoriah:
You are welcome sir, good morning to you.

All the woods we sell and supply in benin are machine saw woods or saw woods, from benin, achi, to the east.

Very rear before u find a sawmill in these regions with falada or alamole woods.

We have a very big sawmill before Edo State University.

All the works I have done in benin was done with straight good iron woods, the carpenters must use anti rust uk standard nails for the joining, from Wall plate 3x4, to King Post 2x6, 2x4 for the beams and strut joints, 2x3 for the purlins and semi hard for 2x2 ceiling noggin.

We are also trying to let house owners know that they don't need ceiling noggins for project they will install pop ceiling or boards, expect they are using pvc, 2x2 ceiling noggin is necessary for that one.

I will create a ticket for that.

The prices I gave u is for machine saw woods.

Straight woods.

Is yours 18ft as normally obtained in Benin? There must be a difference for the wide price margin

rotecch77:
1. You need to change the heater element( the thermostat there is just to control the hotness of the boiler element)
Solution total replacement of the element.

2. The flexible connectors from the hot line that connect to the hot point of the shower is blocked

( solutions total replacement of the flexible ) cost btw 500-1000

Thanks Rotecch 77. Any idea of cost of replacing the element?

walexProjects:
Solutions
1.The main water heating element which is the Thermostat is faulty and needs to be replaced.

2.You need to check the shut off valve of the cold water pipes running to the hot water. It might have been tampered with or broken.
Another major cause of this is corroded pipes.
You need to check the hot water and cold water connection around the shower area.

Get a plumber to fix it for you.

Nawa o, new heater already developing element problem. Phew! Will get a new plumber to check it out, this my own is confused

abuiltech:
In addition to what's the experts said, low pressure in shower is not always caused by malfunctioning water heater, the problem might be extensive, at times this might be due to the long time formation of mineral deposits (scaling) in pipes or in water heater tank, minerals like calcium and magnesium, are the culprits, this is very likely is if the water is hard or the building is old,

What to do

Get the plumber, and fix it, although he knows what to do but this can still be helpful

Step 1. Plumber can remove the water heater, and loop both hot line and cold line with flexible connector, he should on the shower, if pressure at the hotline its still same, the problem might be due is scaling, but he can try step 2

Step 2:

Remove the shower and plug the cold line, check the flow of water, if it's the same, it's might be due to scaling, especially if the pipe is copper pipe and building is an old building,

Step 3: but if there's is change in flow, just clean the shower but in and out, and fix it back, the problem of hotline low pressure should be solved, with that,

After which you can get the water heater repaired, or get the pressure relief valve replaced, or both, with this, you should have your hot water

Thanks for answering me but it's a new house, new heater and new shower, will minerals have built up so soon?
Thanks for arming me with these info

Pls who has experience with this. My sweethome water heater is not getting as hot as i wish even though it's set in high.
2. My shower set has a very low hot water pressure. Very discouraging to use

It's a great day for me, we moved to our house today. I want to immensely thank all contributors here. When we started our house last year, i knew next to nothing. With you guys it was an easy ride, i read up on stages ahead and our workers didn't know we were jjcs. I'm truly grateful. My prayer is that you all complete your projects in Jesus name. God bless you all

An emotional story. Poster, your mum needs to enjoy life, it's her turn to enjoy biko. Your dad will be fine las las

micgray100:
BIGGIE... May your days be long.. Thanks for your articulate reasoning... You will see TWINSKENNY here online since morning.. he won't tell me how to refund my money for 2 months,... He will now log in with other monikers to insult me.. Rather than attend to the issue at hand...

Thanks bro once again... I hope the house compel this TWINSKENNY guy refund my money ... Case closed...

Please in matters like this, twinkenny may not be able to bear all the cost. You guys have to share it. Since he has paid 50k out of the 100k and Spyder has paid 20k. Oga find it in your heart to forgive and move on. Please forgive me if i got it wrong

twinskenny:
you know how painful is it to pay for what you know nothing about? 70k out of my pocket in this Buhari time haba! I don try na.. funny enough I still paid this oga 65k two weeks ago for a business transaction. Like I said I don’t much to say about this any longer. Make it sound like he gave me a contract is very annoying…

Check the attached conversation.. me thinking am doing a Favour not knowing it will turn out this way..

He finalized with the guy I wasn’t aware. He told me he will like to pay through my account since he doesn’t know the guy much… innocently I accepted. Same minutes I forwarded the money to the Borelhole guy… you can see the way I was even begging him not to disappoint.

But you got the borehole man and money was paid through you. You are like a contractor here, you can't go blameless completely, that's the truth. Forgive me if you feel otherwise. You guys should find a way to resolve this. Name calling and vile words won't do it.

Jasobry:
What's the size you got?

The size you have in the picture is the full size, that what we got

michlins:
like I said, I can't help you.

You think you can stop my shine?

Is this the way to go? Gbas gbos with your customer.
Please find a way around this o. If it's possible retrieve the door and give her back her money. She asked for 3ft door, you should have given her exactly what she asked for, anything less is courting trouble. If you intended to remove some inches you should have let her know and not assuming for your customer. Learn to explain everything to your customer ab initio. The wahala with this door is already too much.

Jasobry:
Please where can i get this galvanised mesh and the cost

Where they sell gate materials in your city. Your welder will know. We bought ours btw 130k to 150k for our gate and fence grill

gandkiss:
Good morning Tilers in the house, please how many cartons of 40*40 tiles will cover a 12 by 12 room, with skirting.
Thanks

About 9 cartons.
I'm not a tiler, just from calculation i used in my build.

GoodFaith:
Got the 3/4 HDF 12,100 less than four weeks ago
At about cook rd
Other seller not in cook rd want 12500

Cool, thanks for the info. I got at Ugbowo.

PAPAFEELERS:
Good morning ALL,

Please who know the going rate ( price) of the following items

1. HDF board
2.MDF board
3. AGGER board

I know price flunctuates rapdily in Nigeri this days but will appreciate people experiences on this of recent

Thanks all for the headsup in advance

In Benin, i got HDF for 12500, mdf for 8500. This was last week wednesday

Nosa111:
??

The last i bought was in May and it was 4k

Mixedfruit:
come and clean up your mess

https://www.nairaland.com/6585823/only-yorubas-split-nigeria-without

Please lets not be distracted with this on this thread. The politics section is there for us to ventilate

ubom123:
Please I will like to know, How many bags of cement can be used for tiling a 4 bedroom bungalow. parlour, dinning, 4 rooms all ensuite (toilet will be tiled wall to wall), kitchen(wall to wall), visitor's toilet and sitout. How can i calculate please. Urgent reply will be appreciated. God bless us.

50 to 60bags.
I'm no professional, i only used mine as a reference