Properties › Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by temi4fash(m): 4:19pm On Sep 07, 2020 |
jesusson2020: Less than 15tons, the 15tons of payloader in Berger will over fill the red truck.
And that 15tons is sold for 38k.
13.5 is sold for 33k How can i contact you?? |
Properties › Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by temi4fash(m): 4:10pm On Sep 07, 2020 |
jesusson2020: For sharp sand, no china truck can carry 30tons.
2 of this will carry 30tons and the sand will even remain. How much is this?? Can we get a clearer picture?? What about this one below? is this up to 30T?
|
Properties › Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by temi4fash(m): 4:08pm On Sep 07, 2020 |
n3xt: Maybe the 30 tons in Berger is different. I know my Mack truck will load 30 tons in Berger Sand almost 3 times. Wooow So your truck have to do 3 trips to get 30 tonnes of Sand. |
Properties › Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by temi4fash(m): 4:03pm On Sep 07, 2020 |
jesusson2020: When you come to Berger Ajah where they are selling the sand, 30tons, of payloader will fill 2 china trucks and still remain.
the red truck in the middle is the china truck i am talking about,is on queue in Berger Ajah.
The payloader you see in this picture is what they use to sell the sand in Berger Ajah
The 30tons language is what supplier's use to sell to end user. Which means the red truck is about 15 tons thereabout. |
Properties › Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by temi4fash(m): 3:57pm On Sep 07, 2020 |
n3xt: Can you share the pics of the truck that can carry 30 tons sharp sand at once? A friend just shared this picture with me 30 tonnes of Sand and Granite... Your thoughts on this
|
Properties › Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by temi4fash(m): 2:43pm On Sep 07, 2020 |
fendorf: if you have trucks that can deliver 30tons Biko hook me up with one lol Does it mean there is no truck that can load 30 tonnes of Sharp sand at ones?? |
Properties › Re: Granites And Sand Supplies by temi4fash(m): 2:37pm On Sep 07, 2020 |
olays: For Accurate and Cheap supplies of granite, hard core, stone dust directly from Quarry and Sand (sharp, laterite i.e. filling, plaster and dagbolu). kindly contact Olays Global Services at . We are available for both small and large supplies. We supply as follows:
- 15 Tonnes - 20 Tonnes & 30 Tonnes respectively...
All our supplies comes directly from its source. We deals with both individuals and company (Construction Companies, Developers, Engineers and House Owners ) Call us today for an order, a trial will definitely confuse you and remember that "integrity is our watchword". Thanks.
Regards, Olayinka How much is 30 tonnes?? |
Properties › Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by temi4fash(m): 2:30pm On Sep 07, 2020 |
jesusson2020: Yes granite is 3200 per ton,
Your transportation for china truck is way too much, china truck will charge u 80k to deliver within sangotedo from quarry.
If you have good road, you can use mack trailer to deliver for 60k. Sorry what is the tonnage of the china truck?? Can we see a picture of what the china truck looks like?? jesusson2020: I'm a China truck driver, i started driving China truck during the lockdown, after quitting uber, i have also worked in a construction site b4 my career in driving started.
Please stop manipulating the public.
In Berger Ajah and sangotedo
13tons payloader will fill China truck to full capacity.
China truck itself is 13.5 capacity.
And its sold for 3300+1500 gate total 34500, are you now charging 35500 naira for delivery to a site in sangotedo?
China truck driver charges between 15k to 20k depends on negotiation. Are you now trying to make 20k or more in each supply?
That's greediness oh it is sold for 33k for 13 tonnes |
Investment › Re: I Want To Go Into Sand And Chippings Business. I Need A Mentor Plz (@ph) by temi4fash(m): 12:22pm On Sep 07, 2020 |
KristaPretty: The best way to get is is directly from the Dredge Site for sand and the Quarry for the chippings. It's like getting directly from the factory. Try to make researches on companies who do these things there in PH, if you were in Lagos or Ogun I would have directed you.
For the sand, you can always see wholesalers and dredging owners and companies by the seaside. For the Chippings in PHC, a Nairalander supplies to that area https://www.nairaland.com/2899293/granite-stone-supply-rivers-state. His link.
Goodday. Can you direct me to where i can get granite in lagos?? |
|
Properties › Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by temi4fash(m): 9:31pm On Sep 04, 2020 |
Chekitaut: Location i give you quote. Transportation Cost: From Abeokuta Berger 80k Ojota To Owode/Ogudu/Maryland 85k Oshodi/Ikorodu 90k Mile 2 95-100 Abule Ado/Iyana Iba/Okoko 110k V.I to Lekki 110k Lekki to Ajah 120k Ajah to Ado/Shogotedo 125 Shogotedo to Eleko 130.
*From Ijebu: Eleko 80k Bogije 90k Ajah 100k Lekki 105k
*Ijebu bucket design is 25ton max, only few have 30tons design bucket.
Note pics below is 26tons from Ijebu. For those that counts tyres. The industries required faithfulness you have to pay for it, its not cheap. Whats ijebu bucket design?? |
Properties › Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by temi4fash(m): 9:11pm On Sep 04, 2020 |
iguwagboe: Granite 3 quarters 30 ton for cheap sale ...call 08036219469 now Location |
|
|
|
Autos › Re: Where Do Rad Auto Works Parts Come From Anyway? by temi4fash(m): 8:09pm On Aug 30, 2020 |
Do you sell Honda City parts too?? |
Car Talk › Re: When Things Go Wrong by temi4fash(m): 1:27pm On Aug 27, 2020 |
radautoworks: Nothing. He had been getting sloppy and had a few warnings prior. Things like breaking clips when taking skid plate of and not saying anything when we had some, not cleaning up after himself... I think he got comfortable because we have been paying all of them all through the crisis whether they worked or not. It was the straw that being the camel's back. Such a shame because he's talented. Oh thanks for the clarification.. Some of the talented people lots of times get lackadaisical, overconfident. |
Car Talk › Re: When Things Go Wrong by temi4fash(m): 11:01am On Aug 27, 2020 |
Woow this is great. But i would like to ask, From the tech stand point: Since he has been sloppy for a while but was never like that initially: Can we say he was going thru some unresolved issues? Should a query not have suffice instead of outright termination?? Would love if you could shed some light on this radautoworks: Before I start, I'm posting this because no matter how good you are, things go wrong and it's not only the good we share, we share the bad as well. This story cost us both personnel and money but despite everything had a happy ending.
So a customer had a pretty new Mercedes that needed a full pump replaced. Pretty simple except... One of my techs decided that rather than do what we trained him to do and check all the lines and tank and clean/flush all associated parts he was simply going to go the kazeem route and not bother. WELL... apparently what was in the tank was so bad that it immediately ruined the newly installed pump. Story didn't end there (this was relayed to me second hand so bear with me if some detail is missing).
SOMEHOW not only did it ruin the new pump, the motor started having problems... The car was brought back for him to rectify his error (yes, terrible move but I was not consulted and found out after the fact). Long story short, the motor of this Mercedes was ruined and could not be rebuilt...
Now, this is the part I wanted to emphasize. We immediately acknowledged our error, brought in a replacement pump and motor (both of which have a one year warranty) and refunded the customer. We also had to let the tech go as it wasn't a lack of knowledge but quite simply negligence. This was particularly painful to me because I know what the tech was capable of in the past but he had recently been regressing and getting sloppy.
Did we lose the customer? No, because of how it was handled. Not only that, we got a referral out of it. All this happened while I am away for an extended period and I am incredibly proud of how my staff handled it. I only heard about it because they needed my okay to cover the cost of the replacement motor.
So there you have it, there will come a time when we will mess up. The difference is with us, we own up to it and rectify it. My staff understands that it's not that things won't go wrong, it's how you handle it when they do go wrong.
Pobody's nerfect. |
|
Properties › Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by temi4fash(m): 8:02am On Aug 17, 2020 |
|
Properties › Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by temi4fash(m): 12:07pm On Aug 14, 2020 |
KIDfurniture: Quarry is in ibadan .. stone base is available in large quantity. If you re in ibadan and need some connect with me. I think the quarry is trying to sell off everything in site. New management is also needed. Its along lagos express oriental foods axis.. Snet you a PM |
Properties › Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by temi4fash(m): 12:05pm On Aug 14, 2020 |
KIDfurniture: Quarry is in ibadan .. stone base is available in large quantity. If you re in ibadan and need some connect with me. I think the quarry is trying to sell off everything in site. New management is also needed. Its along lagos express oriental foods axis.. Do they have granite? |
Properties › Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by temi4fash(m): 2:44pm On Aug 13, 2020 |
EgunMogaji2: I think it’s the Bakatari one.
Don’t feel bad if you don’t get the posted price. I consider my 25 tons for N100K a super deal. OK thanks |
Properties › Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by temi4fash(m): 12:56pm On Aug 13, 2020 |
KIDfurniture: Bought same quantity for 50k 2 days ago...quarry in ibadan is shutting down....transport to site 30k ..that is 80k Which quarry is this?? |
Car Talk › Re: Maintenance Tips For Honda Cars by temi4fash(m): 2:29pm On Aug 09, 2020 |
nas00: It's an electrical issue. My guess would be an ignition coil-related issue, but you never can tell till you run a scan. Do that and we go from there. Scan the car after a good drive (not after parking the car overnight or for longer periods). OK thanks I would just that and revert. Thank you |
Car Talk › Re: Maintenance Tips For Honda Cars by temi4fash(m): 11:11am On Aug 08, 2020 |
9icetoo: Scan the car. There will be codes. OK I would do that |
Car Talk › Re: Maintenance Tips For Honda Cars by temi4fash(m): 11:11am On Aug 08, 2020 |
GAZZUZZ: Only spirits can answer. Looool OK.. |
Properties › Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by temi4fash(m): 3:34am On Aug 08, 2020 |
Chekitaut: GRANITE! GRANITE!! GRANITE!!! Lagos Island, Victoria Island, Ikoyi, Lekki-Ajah Price@ N220,000 per 30tons Una... This is about 7k per tonne |
Car Talk › Re: Maintenance Tips For Honda Cars by temi4fash(m): 3:14am On Aug 08, 2020 |
thebigkendo: You need to provide more info.. What car? Model year? does the check engine light disappear when you decelerate below 4000rpm? Any change in engine performance when the check engine comes on?
You should get your car scanned. Thanks for this It's an Honda City 2007. It doesn't change the performance but it sometimes just Jerks a lil and we are good to go. It check engine light remains on. Even after the decelerating. But goes off when I put off the engine and put it on. Only comes on when I accelerate above 4rpm due to gear changes. It's an automatic drive. |
Car Talk › Re: Maintenance Tips For Honda Cars by temi4fash(m): 3:05pm On Aug 07, 2020*. Modified: 3:15am On Aug 08, 2020 |
I notice my Check engine light comes up when my odometer get to 4rpm. it usually happens when am on the highway and picking up speed.
It's a Honda City 2007 vehicle. And engine does not change performance when it happens only jerks a lil
What could cause this??
Cc luvinhubby nas00 thebigkendo Gazzuzz |
Car Talk › Re: Maintenance Tips On Cars. by temi4fash(m): 2:54pm On Aug 07, 2020 |
I notice my Check engine light comes up when my odometer get to 4rpm. it usually happens when am on the highway and picking up speed.
What could cause this?? |
Properties › Re: How To Build Your Comfortable House Earning Little (detailed) Pt 2 by temi4fash(m): 11:51am On Aug 04, 2020 |
|