Hello Dear Sirs
We have suitable prices with high Turkish Quality
please conntact me on +905537023802 call & whatsapp
Mr. Metin

Export specialist

TLAX:
y

Last year purchase for turkish doors

3ft - 80k
4ft - 120k

It increased from 65k/105k while i was sourcing for money so i am not sure it has increased again.

PortalSSDoors:
Hello Dear Sirs
We have suitable prices with high Turkish Quality
please conntact me on +905537023802 call & whatsapp
Mr. Metin

Export specialist

Stop with this contact me nonsense.

Start a thread, fill it with pictures and prices (yes, we know price changes but we'll have a comparative baseline) and watch sales come in after proper vetting.

You are in an audience of people actively building houses and the best you can do is "contact me" ?

EgunMogaji:


Stop with this contact me nonsense.

Start a thread, fill it with pictures and prices (yes, we know price changes but we'll have a comparative baseline) and watch sales call me in after proper vetting.

You are in an audience of people actively building houses and the best you can do is "contact me" ?

"good product sells itself" not too much of advertising ,

Hat he need to do is what you rightly said ,attach pictures and see if people will not respond

EgunMogaji:


Stop with this contact me nonsense.

Start a thread, fill it with pictures and prices (yes, we know price changes but we'll have a comparative baseline) and watch sales call me in after proper vetting.

You are in an audience of people actively building houses and the best you can do is "contact me" ?

i concur

EgunMogaji:


Stop with this contact me nonsense.

Start a thread, fill it with pictures and prices (yes, we know price changes but we'll have a comparative baseline) and watch sales call me in after proper vetting.

You are in an audience of people actively building houses and the best you can do is "contact me" ?

No major difference between the please contact me door Seller and the woman that sells puff puff on the streets. At least we go see the puff puff before we buy am.
Poor presentation and i run away from this kind of people

twinskenny:


i price 2k litter now 49k for geepee

i do hope is geepee though rubber not plastic.. they said they have plastic for 38k

Bros which one bi rubber again, to my knowledge most tanks are made with plastic oh, expect those of metal steel. Abi Naija done invent something better with rubber?

kopell:
Bros which one bi rubber again, to my knowledge most tanks are made with plastic oh, expect those of metal steel. Abi Naija done invent something better with rubber?

They were actually supposed to be produced as a rubber so as to be able to withstand enough stress and variable temperatures. but u know nigeria now...there will always be a second product.

The plastics are the lower grade, they break easily being of a brittle nature.

Larwin:


They were actually supposed to be produced as a rubber so as to be able to withstand enough stress and variable temperatures. but u know nigeria now...there will always be a second product.

The plastics are the lower grade, they break easily being of a brittle nature.

Correct sir.. If u no sabi na where d problem dey be that.. They all look alike

twinskenny:


Correct sir.. If u no sabi na where d problem dey be that.. They all look alike

This explains what happened to my tank. I now believe that I may have been sold an inferior product.

PortalSSDoors:
Hello Dear Sirs
We have suitable prices with high Turkish Quality
please conntact me on +905537023802 call & whatsapp
Mr. Metin

Export specialist

Post all your door designs and price in the thread listed below, specially for Doors.... it will help you advertise too.

https://www.nairaland.com/3246443/doors-discussions-doors-qualities-sizes

Hajji M.

EgunMogaji:

This explains what happened to my tank. I now believe that I may have been sold an inferior product.

But you no tell us what happened to it o. Enquiry mind want to know, so we may be on the lookout..
My plumber and brother always go to buy my water tanks... to avoid mago-mago.
May be next time I will send Oga mi Twinskenny for the procurement.

Hajji M.

mufutau55:


But you no tell us what happened to it o. Enquiry mind want to know, so we may be on the lookout..
My plumber and brother always go to buy my water tanks... to avoid mago-mago.
May be next time I send Twinskenny for procurement.

Hajji M.

It developed cracks and various leaks though certain folks on my site are "sunwo nna's So maybe it's original and why it's so resilient.

EgunMogaji:

It eveloped a cracks and various leaks though certain folks on my site are "sunwo nna's)
So maybe it's original and why it's so resilient.

Now I see.. Leakage; you are right may be due to bad quality or vandals on site.
Everything get fake for Naija o, even we have fake human-beings.
God help us either way.

Hajji M.

EgunMogaji:


It developed cracks and various leaks though certain folks on my site are "sunwo nna's So maybe it's original and why it's so resilient.

if its crack then that's plastic

twinskenny:
if its crack then that's plastic

So the best is rubber made then?

Hajji M.

twinskenny:
if its crack then that's plastic

The minute that you mentioned plastic and rubber I knew I had been had.

They finally got me

Just looked at the receipt, I paid N28K on Sept 20, 2015.

EgunMogaji:

The minute that you mentioned plastic and rubber I knew I had been had.
They finally got me

Just looked at the receipt, I paid N28K on Sept 20, 2015.

Do not lament, we are all learning... its better this way... than multi-million Naira purchase.
And you have been doing real good.

Hajji M.

mufutau55:


So the best is rubber made then?

Hajji M.

Yes Sir

EgunMogaji:


The minute that you mentioned plastic and rubber I knew I had been had.

They finally got me

Just looked at the receipt, I paid N28K on Sept 20, 2015.

Hehehe sorry sir...sometime its better to go with plumber

twinskenny:

Hehehe sorry sir...sometime its better to go with plumber

Actually, I still won't go with Plumber.

I'll get an education ahead of time. I've found that when I go to the market with artisans, they push me towards certain vendors and/or products.

It's just my style to be solo since I can take my time and really loiter and I know that it's not all artisans that are guilty of this.

Larwin:


They were actually supposed to be produced as a rubber so as to be able to withstand enough stress and variable temperatures. but u know nigeria now...there will always be a second product.

The plastics are the lower grade, they break easily being of a brittle nature.

I still stand to be corrected tank are plastic not rubber guys, 3 type of plastics low density and high densities ok, low once are the once supposed to be used for tanks ok. Pls do your research well guys .

kopell:
I still stand to be corrected tank are plastic not rubber guys, 3 type of plastics low density and high densities ok, low once are the once supposed to be used for tanks ok. Pls do your research well guys .

I have never seen any tank that is rubber in Nigeria. I only see plastic tanks. What I know as rubber are the materials they use to make things like car and truck tyres and those other soft rubber products like rubber handles for tools and even motor parts.

Plastic on the other hand are tougher to bend. These are the materials which make all tanks, gallons and some chairs in Nigeria. There may be fake tanks, but not rubber. Rubber is softer than plastic.

EgunMogaji:


This explains what happened to my tank. I now believe that I may have been sold an inferior product.

That is not reason it's crack, some of them are design for chemical only. Look for the symbol on it, will tell you what is made for.

kopell:
That is not reason it's crack, some of them are design for chemical only. Look for the symbol on it, will tell you what is made for.

You can't make that assertion unless you've examined the tank personally.

I want to encourage every builder to include power room In Their design.
This is intended to accommodate your inverter and batteries.
Also include it in your wiring plans.
You may also design your roof to face south so u can easily mount your panels.

Enjoying 24/7 power in my house since i moved in December last year.
I have a total of 4kw in solar panels. A 5kva inverter, 16 units of 6v225ah Trojan batteries and a classic 150 mppt solar controller all protected by state of the art surge protection devices.

I am grateful to God for His blessings.

My cars are parked under the solar wooden stand. I would have used galvanised pipes but due to cash constraints. Something like this can be done too. This can be improved too... I welcome ideas.

Just like it was mentioned few pages back, we need to encourage each other. Going green is very good.
Note: you have to do your home work properly b4 buying inverter or solar panels else you will be dissapointed.
To buy my current set up today, you need nothing less than 3 million Naira. So you need to plan well.
Even as a person who has installed several units in Nigeria (www.facebook.com/apexsolarnigeria), I can't boast that I know all. We keep learning everyday. I've made several mistakes in the past. Client education is very important and the first step. But most clients don't have time to listen and in few months they will start crying solar is bad.
In solar, I used to say 1+1 is not always equals to 2. Sometimes it's equal to half. Lol

abunafiu:
I want to encourage every builder to include power room In Their design.
This is intended to accommodate your inverter and batteries.
Also include it in your wiring plans.
You may also design your roof to face south so u can easily mount your panels.

Enjoying 24/7 power in my house since i moved in December last year.
I have a total of 4kw in solar panels. A 5kva inverter, 16 units of 6v225ah Trojan batteries and a classic 150 mppt solar controller all protected by state of the art surge protection devices.

I am grateful to God for His blessings.

Congrats boss... you must have spent some money to get the solar panel installed. I could remember in November last year when I make an inquiry about the solar panels that can take care of lighting and some socket that powered the TVs in my house, I was given 980k for 1kva.. All the electrical cabling has been done with a separate DB.

The second advice is very important when doing electrical installations, Electrical room is very important, all the batteries, solar/equipment is very important and also to have a separate Distribution board for solar/inverter even though you are not ready to install them now. Bye-pass can be use to have those lighting and socket powered.

I normally tell all my client to have those things in place even though they don't have the money presently to buy the equipment.

Lastly, Extractor fan must be install in the electrical room to extract the battery fumes because it is dangerous to health.

CONGRATS ONCE AGAIN...

abunafiu:
My cars are parked under the solar wooden stand. I would have used galvanised pipes but due to cash constraints. Something like this can be done too. This can be improved too... I welcome ideas.

Just like it was mentioned few pages back, we need to encourage each other. Going green is very good.
Note: you have to do your home work properly b4 buying inverter or solar panels else you will be dissapointed.
To buy my current set up today, you need nothing less than 3 million Naira. So you need to plan well.
Even as a person who has installed several units in Nigeria (www.facebook.com/apexsolarnigeria), I can't boast that I know all. We keep learning everyday. I've made several mistakes in the past. Client education is very important and the first step. But most clients don't have time to listen and in few months they will start crying solar is bad.
In solar, I used to say 1+1 is not always equals to 2. Sometimes it's equal to half. Lol

Wow!!!! 3million naira......Pls how many KVA did u install Sir... Can it power AC?

Thanks

topsy23:


Wow!!!! 3million naira......Pls how many KVA did u install Sir... Can it power AC?

Thanks

Yes it can power 2 units of 1hp AC though you need to put them on one after the other.

Now the maths:
To power 1Hp AC for 10hrs, that's 750w*10hrs= 7500wh or 7.5Kwh.
My batteries can only store 21600wh or 21.6kwh.
To ensure my batteries serve me for a long time, I need to observe 50% dod which means I can only dream 50% of 21.6kwh that's approx 10.5kwh.
In 10 hrs, I would have drained more than 7.5kwh(no system is 100% efficient) . Tats why we discourage the use of AC on my system. By the time I start enjoying the thing, you will hear Low Battery alarm.
The secret to enjoying this redoing your loads to minimum.
My running load is usually 200w during day and around 500w in d night. My fridge runs for 24hrs ( thermostat @position 4....which means it runs for 12 to 15hrs in a day).

My inverter is 5kva.

topsy23:


Congrats boss... you must have spent some money to get the solar panel installed. I could remember in November last year when I make an inquiry about the solar panels that can take care of lighting and some socket that powered the TVs in my house, I was given 980k for 1kva.. All the electrical cabling has been done with a separate DB.

The second advice is very important when doing electrical installations, Electrical room is very important, all the batteries, solar/equipment is very important and also to have a separate Distribution board for solar/inverter even though you are not ready to install them now. Bye-pass can be use to have those lighting and socket powered.

I normally tell all my client to have those things in place even though they don't have the money presently to buy the equipment.

Lastly, Extractor fan must be install in the electrical room to extract the battery fumes because it is dangerous to health.

CONGRATS ONCE AGAIN...

Correct sir.
Thanks for your kind words.
Quality 1kva is around that price.
2 batteries
1500w solar panels.. ..etc.

About the extractor fan, a low wattage is highly encouraged and should be automated ( temperature sensor) .

mufutau55:


Do not lament, we are all learning... its better this way... than multi-million Naira purchase.
And you have been doing real good.

Hajji M.

are we talking when the kobo kobo reciept show

abunafiu:
I want to encourage every builder to include power room In Their design.
This is intended to accommodate your inverter and batteries.
Also include it in your wiring plans.
You may also design your roof to face south so u can easily mount your panels.

Enjoying 24/7 power in my house since i moved in December last year.
I have a total of 4kw in solar panels. A 5kva inverter, 16 units of 6v225ah Trojan batteries and a classic 150 mppt solar controller all protected by state of the art surge protection devices.

I am grateful to God for His blessings.

I have a dedicated 2X4 feet space (external for batteries) and a 5X5 feet space (internal for electronics like inverters) in my gateman accessory building that is dedicated to power.