RobinHez:
how do i get my account back after upgrading on q26g?

Your account is glue to your qsat after upgrade insert sim with mb goto eutelsat 36 and scan for channels and save

hugman:


Your account is glue to your qsat after upgrade insert sim with mb goto eutelsat 36 and scan for channels and save

ok thanks....after upgrading, the channela are still intact , is it strange? or do i have to do a factory reset?

texas07:
I have done my upgrade but is not showing me connect to server on my q23g. Wht may b d problem nw and even my Q28g is not even showing

Insert sim with mega bit try change ur sim mtn or glo

RobinHez:

ok thanks....after upgrading, the channela are still intact , is it strange? or do i have to do a factory reset?

No need, that how it upgrade now,

RobinHez:

ok thanks....after upgrading, the channela are still intact , is it strange? or do i have to do a factory reset?

No need, that how it upgrade now,
Activate your Xcam and sim setting

hugman:
No need, that how it upgrade now, Activate your Xcam and sim setting

ah....sorry bro if i'm asking stupid questions o, ( how do i activate the xcam?

RobinHez:

ah....sorry bro if i'm asking stupid questions o, (
how do i activate the xcam?

Hope your qsat is working now,
Your qsat q26g don't need xcam for now but to activate it goto menu-setting - press 1512 on your remote

hugman:


Hope your qsat is working now,
Your qsat q26g don't need xcam for now but to activate it goto menu-setting - press 1512 on your remote

i havent gotten the welcome to server message yet, but thanks anyways.

Please any. Positive info on AONE

texas07:


Is ur qsat showing nw

Yes

hugman:
FOR THOSE QSAT THAT ARE NOT SHOWING PLS DOWNLOAD THE FOLLOWING FIRMWARE May 2015

FOR QSAT Q26G https://drive.google.com/file/d/0B0RADSNmMIPRQmlLbVlzQ3V1STg/view?usp=sharing

FOR QSAT Q23G
https://drive.google.com/file/d/0B0RADSNmMIPRRXYzam12U1VjR0k/view?usp=sharing

FOR Q13G
https://drive.google.com/file/d/0B0RADSNmMIPRaVREbDdqcHJBVVU/view?usp=sharing

FOR QSAT Q11G
https://drive.google.com/open?id=0B0RADSNmMIPRcFh0ZncxVENtTE0&authuser=0

QSAT 11+
https://drive.google.com/file/d/0B0RADSNmMIPRRkQ5MXBUQS01VzA/view?usp=sharing

QSAT 13+
https://drive.google.com/file/d/0B0RADSNmMIPRQ2NWSVYwQ1lqaU0/view?usp=sharing

QSAT 16+
https://drive.google.com/file/d/0B0RADSNmMIPRY3FnZ1hCYW9WbFE/view?usp=sharing


METHODS TO UPGRADE QSAT FIRMWARE

1. BY FLASH DRIVE

2. ANDROID PHONE WITH NO VIRUS SD CARD


1. BY FLASH DRIVE
UPGRADE OF FIRMWARE IN QSAT RECEIVER

1.Remove sim card b4 upgrading

2. is wise to use generator because any blackout in power supply render your iks qsat receiver dead on the spot

3.download precise firmware of the receiver into USB flash drive file usually end in .bin

4. insert USB flash to your iks receiver
on remote control
click menu button -
click upgrade
click USB/card upgrade
select the precise qsat firmware and click to start upgrading
after it completed your qsat receiver



BY ANDROID PHONE

HOW TO USE ANDRIOD PHONE TO UPGRADE FIRMWARE
IN QSAT RECEIVER
it safe to upgrade qsat firnware with andriod phone first
scan ur andriod phone with active anti virus to ensure that
there is no virus on the phone and on the sdcard
pls use fresh sdcard for easy identification and no
problem in the process of upgrading and ensure your
andriod phone is properly charge and stable battery
1.Remove sim card b4 upgrading
2. is wise to use generator because any blackout in power
supply render your iks qsat receiver dead on the spot
3.download precise firmware of the qsat receiver into
andriod phone on sd card , file usually end in .bin
4.after downloading the qsat firware connect USB from ur
andriod phone to your qsat receiver
on remote control
click menu button -
click upgrade
click USB/card upgrade
select the precise qsat firmware and click to start
upgrading
after it completed your qsat receiver will reboot itself
5. now goto menu-setting-xcam-acamhd change active
to on
6. goto setting -ethernet config and click and change to
gprs goto to config and select ur sim network.
your qsat now working with the new firmware perfectly

Good morning hugman
I noticed for the upgrade you only stated for the rest model of qsat. But Qsat 28G Is not among the software u listed. Pls how can I get the link to download the new software for upgrade. Or if I use the one for 26G will it work.

hugman:


Insert sim with mega bit try change ur sim mtn or glo

I have mega bit in my sim but d issue dia is dat it dnt tell me welcome to server it doesn't show dat 2 me

hugman:


Hope your qsat is working now,
Your qsat q26g don't need xcam for now but to activate it goto menu-setting - press 1512 on your remote

Bros what do i do my qsat 23g is showing bad signal

wisekriss:



Good morning hugman
I noticed for the upgrade you only stated for the rest model of qsat. But Qsat 28G Is not among the software u listed. Pls how can I get the link to download the new software for upgrade. Or if I use the one for 26G will it work.

No new software for qsat q28g , I will let you know when the firmware for qsat q28g is available
If your qsat q28g is not working be patience work in progress.....

texas07:


I have mega bit in my sim but d issue dia is dat it dnt tell me welcome to server it doesn't show dat 2 me

HOW TO RE CONFIGURE YOUR QSAT FOR SIGNAL

Goto - menu- setting-Ethernet
config- click link type and change it to GPRS-click config
and select ur sim network-exit - goto installation- antenna
setting on satellite choose eutelsat 36 e press ok then move
to down to transponder n select 11747/27500/H press ok
then press ur blue button to scan n change manual scan to
blind scan and press ok

mumu9gerian:

Bros what do i do my qsat 23g is showing bad signal

HOW TO RE CONFIGURE YOUR QSAT FOR SIGNAL

Goto- menu- setting-Ethernet
config- click link type and change it to GPRS-click config
and select ur sim network-exit - goto installation- antenna
setting on satellite choose eutelsat 36 e press ok then move
to down to transponder n select 11747/27500/H press ok
then press ur blue button to scan n change manual scan to
blind scan and press ok

HOW TO IF YOUR SIM HAVE INTERNET CONNECTION

insert your sim into your qsat power off then turn it on again, if your qsat display connection successfully means your sim have Internet

hugman:


Do factory reset
factory reset - setting - system-factory reset then enter
password 0000 click yes
after the factory reset press exit - menu- setting-Ethernet
config- click link type and change it to GPRS-click config
and select ur sim network-exit - goto installation- antenna
setting on satellite choose eutelsat 36 e press ok then move
to down to transponder n select 11747/27500/H press ok
then press ur blue button to scan n change manual scan to
blind scan and press ok

I have done all that

hugman:


No new software for qsat q28g , I will let you know when the firmware for qsat q28g is available
If your qsat q28g is not working be patience work in progress.....

OK I would be waiting...I was told by my technician that qsat company said that money to bring back the server is too much that for now they can't do it. That was he told me this money..well just like u promised I would be waiting..oshe....

Mine Q23g shows network successful bt it's showing scramble channel

Pls house. Can qsat show CANAL @22W?

hoyin01:
Mine Q23g shows network successful bt it's showing scramble channel

You must upgrade to the latest firmware b4 it will work

hugman:


You must upgrade to the latest firmware b4 it will work

I sent u a mail. Pls reply.

Guys,my qsat q26g keeps disconnecting..Scramble channel..I cant watch a whole movie without losing the signal.Not to mention it was offline since i bought it last week.How reliable are these servers?Or could it be an issue with my sim card connection?


Good morning hugman
I noticed for the upgrade you only stated for the rest model of qsat. But Qsat 28G Is not among the software u listed. Pls how can I get the link to download the new software for upgrade. Or if I use the one for 26G will it work.[/quote]

QSAT Q28G FIRMWARE NOW AVAILABLE

QSAT q28g download this working firmware from hugman
https://www.dropbox.com/s/c3u3zcdlo20efwb/1512Combo_Q28G%28S2%20T2%29_CAR_V7.04.71_20150311.bin?dl=0

*

My Qsat 23g is nt showing since av done d upgrade pls help

hugman:
QSAT Q28G FIRMWARE NOW AVAILABLE

QSAT q28g download this working firmware from hugman
https://www.dropbox.com/s/c3u3zcdlo20efwb/1512Combo_Q28G%28S2%20T2%29_CAR_V7.04.71_20150311.bin?dl=0

Hi hugman. ..I just upgraded it but it's still not showing..do I need to rescan.though the station 's are intact. It will show connected to server and all the rest but still would not show. What the next step..

hoyin01:
My Qsat 23g is nt showing since av done d upgrade pls help

Follow the step on this page how to configure ur qsat for internet
If it show connection successfully then welcome to server mean your qsat is working

wisekriss:



Hi hugman. ..I just upgraded it but it's still not showing..do I need to rescan.though the station 's are intact. It will show connected to server and all the rest but still would not show. What the next step..

Congrat ur qsat q28g is now working for showing welcome to server, if you can't view any channels means a general problem

Wher can i Get Qsat28 and @ wat cost? I reside in Ikd @hugman

fatito1:
Wher can i Get Qsat28 and @ wat cost? I reside in Ikd @hugman

Go to alaba