ibro360: pls how do i rebuild power steering pump as i plan on doing such for my golf 3.

why would want to rebuild a power steering pump ?

based on UK standards i have never heard any mechanic saying he wants to rebuild a steering pump as long it is working fine leave it alone

as long the pump has enough fluid it should be fine if it dies most due to wear and tear get a replace

How mechanic go chop

ZIM DRILL:

why would want to rebuild a power steering pump ?

based on UK standards i have never heard any mechanic saying he wants to rebuild a steering pump as long it is working fine leave it alone

as long the pump has enough fluid it should be fine if it dies most due to wear and tear get a replace

tnx my power steering is so soft but makes alot of noise i drain n replace it wit abro transmission fluid it d noise stopped for a while n continued

Piyke: Hello everyone,

This tread is for car DIY enthusiasts to share their DIY history or list planned ones. I guess (Siena's will fill the whole Nairaland )

Here a list of my past DIYs (on 2003 Accord 4cyl, LX, US spec)
1. Fuel pump assembly change (2011)
2. Oil and filter changes (Every 3 months)
3. Power steering o-ring change( this was to fix a whine that occurs each time the car was cold) 2011
4. Serpentine belt replacement. (2013)
5. Transmission fluid replacement (2013)
6. Throttle body cleaning (As needed)
7. Replacement of AC relay (2011)

Planned DIYs
1. Replacement of Automatic tensioner
2. Power Steering rebuild (replacement of seals. Current one leaks from one of the seals)
3. Coolant flush.

As you list yours remember to state the vehicle and trim. You never know you may solve a fellow Nairalander's problem.

I have now performed all above listed DIYs. That for the coolant flush can be found in this thread: https://www.nairaland.com/1541197/coolant-drain-flush-refill-diy

I will open a thread to deal with the Power steering rebuild and the replacement of my Automatic Tensioner. Watch out for it if interested!

1.honda civic brake master cylinder re-kit
2.adding of extra speakers.
3.bleeding of golf 3 brake system.
4.making all 4 wheels of golf 3 brake active,because d back brakes wer blocked wit nails by road side mechanics.
5.changing of oil and filters.
6.removing and washing of fuel tank.

Piyke:

I have now performed all above listed DIYs. That for the coolant flush can be found in this thread: https://www.nairaland.com/1541197/coolant-drain-flush-refill-diy

I will open a thread to deal with the Power steering rebuild and the replacement of my Automatic Tensioner. Watch out for it if interested!

pls wer can i get d o-ring of honda accord 2005 V6,the power steering pump makes a whining noise every morning and d fluid reservior hav small bubbles.

Do you know if you have the right fluid in the first place the wrong fluid will boil

ibro360: pls wer can i get d o-ring of honda accord 2005 V6,the power steering pump makes a whining noise every morning and d fluid reservior hav small bubbles.

To further nail the diagnosis, does the whine increase when you turn the steering to any side at startup?
Does the whine reduce after the car has heated up?
Does the sound return with full force after the car has cooled down and you start it again no matter the time of day?

If the answer to all these questions are yes then the most likely cause is PS inlet o-ring (This is the hose that goes from the reservoir to the pump. loosen the size 10 bolt and you'll find the o-ring). I got mine from the US but I'm sure if you take it to a parts market you should be able to get it. Best of luck. It would not take up to 10mins to replace

Piyke:

To further nail the diagnosis, does the whine increase when you turn the steering to any side at startup?
Does the whine reduce after the car has heated up?
Does the sound return with full force after the car has cooled down and you start it again no matter the time of day?

If the answer to all these questions are yes then the most likely cause is PS inlet o-ring (This is the hose that goes from the reservoir to the pump. loosen the size 10 bolt and you'll find the o-ring). I got mine from the US but I'm sure if you take it to a parts market you should be able to get it. Best of luck. It would not take up to 10mins to replace

tnx alot all d answers to ur questions are yes, i will try to get d o-ring.

Greetings dear bros!
List of DIY's I've done on my Toyota Camry 03 include as follows:

A/C Relay replacement
Upper engine mount replacement
Engine splash shield replacement
Engine oil & filter changes (every 3 months)
Horn replacement
Engine Air filter change
Cabin Air filter change
Throttle body cleaning
Rear light bulb changes
Tyre rotation

Future DIY plans:
Power steering flush
Automatic Transmission Fluid change
Air fuel sensor replacement

Good day people
CAr, Jeep Liberty 4x4,3.7 Petrol,2004
DIYs Done
1 change of Drive belt
2,Regular Oil change + FIlter @ 3k miles
3 Replaced Alternator
4 Battery changed
5 Front and Rear Break pads changed plus calliper service
6,front and rear wiper blades changed
7,Tyre rotation
8,Brain Box changed
9,Head lamp reflector cleaned
10,after mkt antennae instaled
11,Rear and front axle fluid drained and re filled
12 Tail glass gas thrust changed
13,Hood/bonnet gas thrust replaced
14, Crank and cam shaft sensors replaced.

Planned DIY

1 main project Change of Entire Rear axle assembly, expecting replacememnt soon on a container from the US
2 Change of automatic gear fluid,
3 change of transmission filter plus gasket.
4 change of O2 sensor Bank 2.1(the one Before the Cat COnv.

Mecksmail: Greetings dear bros!
List of DIY's I've done on my Toyota Camry 03 include as follows:

A/C Relay replacement
Upper engine mount replacement
Engine splash shield replacement
Engine oil & filter changes (every 3 months)
Horn replacement
Engine Air filter change
Cabin Air filter change
Throttle body cleaning
Rear light bulb changes
Tyre rotation

Future DIY plans:
Power steering flush
Automatic Transmission Fluid change
Air fuel sensor replacement

When you change ur transmission fluid do you also change the filter inside?

I am a passionate 'DIYer'.

2007 Honda Accord SE, 2.4L I4; Alabaster Silver Body with Black Interior - Sold
1. Changed disc rotors and brake pads
2. Repaired power steering pump. Fixed whine noise on power steering pump by replacing o-ring
3. Changed engine seating
4. Changed engine oil, cabin air filter, engine air filter and oil filter
5. Flushed and changed coolant
6. Did resonator delete
7. Installed Air Filter Minder device
8. Did underside & underhood routine inspection after a major travel & after the rainy season...walkaround inspection of car body, tires & wheels

2010 Honda Accord EX-L, 3.5L V6; Pearl Black body with Black Leather Interior - Current
1. Changed ATF
2. Change engine oil, carbin air filter, oil filter and topped up coolant with distilled water
3. Did resonator delete
4. Replaced entire airbox (air intake filter and box) with K&N Cold Air Intake System...will upload picture if required
5. Install Air Filter Minder device - Planned
6. Replace OEM front brake discs with Aftermarket Drilled and Slotted Discs - Planned

**Wash engine after any major travel and after each service (oil change) to remove spilled oil and keep engine clean and looking good
**Take to the pit (lube bay) for lubrication, general routine inspection - body, tires, wheels, lights & underside inspection after any major travel
***Polish interior (seats, dash, side walls) once in a month
****Polish body once quarterly

PS: ALWAYS USE MANUFACTURER'S RECOMMENDED OIL AND FLUIDS and believe me your car engine will be happier.

davo3286: I am a passionate 'DIYer'.

2007 Honda Accord SE, 2.4L I4; Alabaster Silver Body with Black Interior - Sold
1. Changed disc rotors and brake pads
2. Repaired power steering pump. Fixed whine noise on power steering pump by replacing o-ring
3. Changed engine seating
4. Changed engine oil, cabin air filter, engine air filter and oil filter
5. Flushed and changed coolant
6. Did resonator delete
7. Installed Air Filter Minder device
8. Did underside & underhood routine inspection after a major travel & after the rainy season...walkaround inspection of car body, tires & wheels

2010 Honda Accord EX-L, 3.5L V6; Pearl Black body with Black Leather Interior - Current
1. Changed ATF
2. Change engine oil, carbin air filter, oil filter and topped up coolant with distilled water
3. Did resonator delete
4. Replaced entire airbox (air intake filter and box) with K&N Cold Air Intake System...will upload picture if required
5. Install Air Filter Minder device - Planned
6. Replace OEM front brake discs with Aftermarket Drilled and Slotted Discs - Planned

**Wash engine after any major travel and after each service (oil change) to remove spilled oil and keep engine clean and looking good
**Take to the pit (lube bay) for lubrication, general routine inspection - body, tires, wheels, lights & underside inspection after any major travel
***Polish interior (seats, dash, side walls) once in a month
****Polish body once quarterly

PS: ALWAYS USE MANUFACTURER'S RECOMMENDED OIL AND FLUIDS and believe me your car engine will be happier.

@ bolded,
Needed

davo3286: I am a passionate 'DIYer'.

2007 Honda Accord SE, 2.4L I4; Alabaster Silver Body with Black Interior - Sold
1. Changed disc rotors and brake pads
2. Repaired power steering pump. Fixed whine noise on power steering pump by replacing o-ring
3. Changed engine seating
4. Changed engine oil, cabin air filter, engine air filter and oil filter
5. Flushed and changed coolant
6. Did resonator delete
7. Installed Air Filter Minder device
8. Did underside & underhood routine inspection after a major travel & after the rainy season...walkaround inspection of car body, tires & wheels

2010 Honda Accord EX-L, 3.5L V6; Pearl Black body with Black Leather Interior - Current
1. Changed ATF
2. Change engine oil, carbin air filter, oil filter and topped up coolant with distilled water
3. Did resonator delete
4. Replaced entire airbox (air intake filter and box) with K&N Cold Air Intake System...will upload picture if required
5. Install Air Filter Minder device - Planned
6. Replace OEM front brake discs with Aftermarket Drilled and Slotted Discs - Planned

**Wash engine after any major travel and after each service (oil change) to remove spilled oil and keep engine clean and looking good
**Take to the pit (lube bay) for lubrication, general routine inspection - body, tires, wheels, lights & underside inspection after any major travel
***Polish interior (seats, dash, side walls) once in a month
****Polish body once quarterly

PS: ALWAYS USE MANUFACTURER'S RECOMMENDED OIL AND FLUIDS and believe me your car engine will be happier.

Please upload the pics for our benefit

davo3286: I am a passionate 'DIYer'.

2007 Honda Accord SE, 2.4L I4; Alabaster Silver Body with Black Interior - Sold
1. Changed disc rotors and brake pads
2. Repaired power steering pump. Fixed whine noise on power steering pump by replacing o-ring
3. Changed engine seating
4. Changed engine oil, cabin air filter, engine air filter and oil filter
5. Flushed and changed coolant
6. Did resonator delete
7. Installed Air Filter Minder device
8. Did underside & underhood routine inspection after a major travel & after the rainy season...walkaround inspection of car body, tires & wheels

2010 Honda Accord EX-L, 3.5L V6; Pearl Black body with Black Leather Interior - Current
1. Changed ATF
2. Change engine oil, carbin air filter, oil filter and topped up coolant with distilled water
3. Did resonator delete
4. Replaced entire airbox (air intake filter and box) with K&N Cold Air Intake System...will upload picture if required
5. Install Air Filter Minder device - Planned
6. Replace OEM front brake discs with Aftermarket Drilled and Slotted Discs - Planned

**Wash engine after any major travel and after each service (oil change) to remove spilled oil and keep engine clean and looking good
**Take to the pit (lube bay) for lubrication, general routine inspection - body, tires, wheels, lights & underside inspection after any major travel
***Polish interior (seats, dash, side walls) once in a month
****Polish body once quarterly

PS: ALWAYS USE MANUFACTURER'S RECOMMENDED OIL AND FLUIDS and believe me your car engine will be happier.

hi please what did you use to polish your interior and car body and where did you get them from?

Recently completed DIYs apart from previously listed:

1. Fuel filter cleaning.
2. Servicing of right front wheel brake calliper: A worn seal was leaking brake fluid that made the handbrake light come on despite the handbrake not being engaged. Brought down the calliper, took it to Camp (Enugu) where the offending seal was replaced then I remounted it and bled the system.
3. Adjusted handbrake height (4-7 clicks): I have noticed that Accords unlike Toyota's need more frequent adjusting of drum brakes.
4. Inspected and cleaned spark plugs.
5. Attempted replacing PCV valve: Can you imagine, got a Berck and Arnley PCV valve (From US) for the I4 03 Accord and while fixing it the part broke on tightening. I just cleaned the old one with petrol and put it back. I am going to leave a 1-star review for the part on Amazon from where I bought it . Thank God the old one still rattles.
6: Cleaned EGR valve

Still plan the following:
1. Transmission filter replacement
2. Change brake fluid
3. Replace air cleaner element with OEM (Part already arrived)

1. CVT transmission fluid replacement and filter cleaning
2. Coolant flush
3. Rear light replacement
4. Air filter washing an its compartment cleaning.
5. MAF cleaning
6. Engine washing
7. Returning the fan to auto control after mechanic/auto electrician changed to work all time
8. Mending and fixing the plastic uder the engine and inside front tyre compartment
9. ..and lots more

My recent diys

https://www.nairaland.com/852138/how


May be the mod can move or to cartalk please

My recent diys

https://www.nairaland.com/852138/how


May be the mod can move the thread to cartalk please

For me, I'm more of an exterior guy. I don't do too many engine related DIY unless it's not too difficult. I use a 2008 Honda accord.

Changed my headlights with angel eyes/ leds . Also installed a hid ballast/bulbs underneath the bumper. Not easy AT ALL.

changed the logos to all red (front and back)

Installed under-car lighting (led)

Colored my brake calipers red..

Installed reverse camera and rear view mirror monitor

Installed parrot bluetooth hands free system(Ipod, USB, aux in etc)

Body decals

who killed this thread arggggggggggggggggg

erico2k2:
who killed this thread arggggggggggggggggg

LOL. I don't know. Probably tells you that Nigerians aren't too interested in this stuff.

Changed the display to a touchscreen GPS unit (from China) in my 2008 accord. Complete with map of Nigeria, video and audio player (through USB/Memory card) and reverse camera. Sweet...

og2711:


LOL. I don't know. Probably tells you that Nigerians aren't too interested in this stuff.

Changed the display to a touchscreen GPS unit (from China) in my 2008 accord. Complete with map of Nigeria, video and audio player (through USB/Memory card) and reverse camera. Sweet...

Nice who did U buy from did you order it direct?

og2711:


LOL. I don't know. Probably tells you that Nigerians aren't too interested in this stuff.

Changed the display to a touchscreen GPS unit (from China) in my 2008 accord. Complete with map of Nigeria, video and audio player (through USB/Memory card) and reverse camera. Sweet...

Sir how much was the cost of the whole installment and I like the pics I am seeing it would be very useful for someone like me who doesn't know so many roads in Lagos.

erico2k2:

Nice who did U buy from did you order it direct?

I was fortunate enough to travel to China last year so I just put it in my luggage.

dumo1:

Sir how much was the cost of the whole installment and I like the pics I am seeing it would be very useful for someone like me who doesn't know so many roads in Lagos.

I bough mine for RMB1500 (which was about 45k at the time) while in China. However you cannot get that price unless you're there. Go on www.aliexpress.com and they have many there. They quote crazy prices ($800 etc), but if you talk with the seller or browse extensively,you will get it for cheaper. Also insist on free shipping. Also they are of 2 variants based on the OS they run. This one i posted runs Windows Mobile and is cheaper, but i advice going for the ones that run android as they can be customized to no end.

E.g: http://www.aliexpress.com/item/-/32444076900.html

As for the installation, I did it myself at home. Once you know where all the screws and clips are located, its actually a piece of cake. If you don't want to, I can send you the link to a video on youtube so that you can guide whoever you decide to use (These panel beaters will just break everything if you leave them). If you drive the same car, i have a few spare reverse camera kits i can sell for a hefty profit..

Nice, Eriko2k2 for bringing this back. I've done quite a lot since this last post.

Piyke:
Recently completed DIYs apart from previously listed:

1. Fuel filter cleaning.
2. Servicing of right front wheel brake calliper: A worn seal was leaking brake fluid that made the handbrake light come on despite the handbrake not being engaged. Brought down the calliper, took it to Camp (Enugu) where the offending seal was replaced then I remounted it and bled the system.
3. Adjusted handbrake height (4-7 clicks): I have noticed that Accords unlike Toyota's need more frequent adjusting of drum brakes.
4. Inspected and cleaned spark plugs.
5. Attempted replacing PCV valve: Can you imagine, got a Berck and Arnley PCV valve (From US) for the I4 03 Accord and while fixing it the part broke on tightening. I just cleaned the old one with petrol and put it back. I am going to leave a 1-star review for the part on Amazon from where I bought it . Thank God the old one still rattles.
6: Cleaned EGR valve

Still plan the following:
1. Transmission filter replacement
2. Change brake fluid
3. Replace air cleaner element with OEM (Part already arrived)

All those planned, I have carried out. In addition, I've replaced my valve cover gasket, checked valve clearances, replaced vtc filter assembly, replaced vtec solenoid spool valve filter, changed secondary O2 sensor and a still have a few tasks planned. Will list them in a bit.

Weldon piyke as for me.I have got some job on my jeep liberty.but I'm not I 9ja till xmas so I'm getting the parts frm here and fixing them wen I gt gome.

Replaced my driver door actuator yesterday! Should be dishing out the DIY procedure soon. You can catch a lot of my repairs on my blog: www.diyautoworksng.com