More pictures.

This is how far we have done.

rotecch77:
10m with high class finishings

Sure sir
When close to 6m has already been spend.
No roof yet.

madridguy:
So lovely.

But why Nigerians girls no dey put on bikini in breach.

Hum2020:
Sibce you have the documents abd the community head signed when brought the land it mesns you have no problem let him look for another land for his cousin abd use lawyers to follow them

You said it all.

rotecch77:
twyfor and thailand wc are many in design but price range from

twyford 11500-150,000
sweet home range from 40,000-85,000

you can chat me up on whatzap for more explanation and pucs of diff type with there prices

Can you please post some pictures with prices .

Hello good morning all what is the current price of 4x4 ft slate please.

papabaks:
Good Morning guys. I so much love what I have read so far on this page. I must say you guys did an outstanding job.

Meanwhile, I will like to know on an average scale how much will it cost me to set up a two (2) hectares of plantain farm in Ogun state.

and how much will it cost me to acquire the processing tools like washer, slicer, fryer dryer and packaging into ships?

Thank you guys.
papabaks@gmail.com

You just wrote all l wanted to write too mine is also in Ogun state Abeokuta.

Arnoldfish:
1.3m plus for wiring alone? fittings not inclusive? ahhhhhh

l've just done mine last two weeks the electrical quoted almost the same quote with yours.
In short l will advise you to reduce the number of wires that he quoted where he wrote 20 buy 17 ,where he wrote 10 buy 8 do that to others too and made sure you are around with them when the work is going on if they need more you will buy more .

I was able to save over N300k after completing the job.
On the workmanship it just to much try and cut in between N180-200k.
Best of Luck.

ceelog:


Why don't you and a few friends take a 3 day holiday and paint the house. After everyday have some fun in the evenings and Crack jokes.

DIY is fun and I have participated in a DIY house re-painting.

It seems you are not residing in Nigeria.
How many people know what is DIY in Nigeria when there are cheap Labour.

diordaves:


Please note that 30ft is the recommended height minimum of water towers. This measurement is very popular amongst homeowners but in all practicality 30ft can easily go wrong. Because when you're quoted 30ft it is for the entire thing without allowance for the part that would be dug and buried below street level.

So depending on your soil condition or the implementation method of the installer, if for example 5ft (or even more) is buried beneath street level, that leaves you with about 25ft or less in practical actual height of your tower. This is about the height of the upper floor lintel level or maybe a bit more. With this scenario, you may suffer constant or occasional water pressure at home. You only have good pressure when your tank is full; half tank, no pressure. Your water tank should be 1 meter minimum above the lintel level for good water pressure.

So "close eye" and do 40ft tower and rest. 40ft is the best no maintenance water tower. With building always add 10% to any recommended minimum.

What if the house is a bungalow must it be 30ft high.

pejuakinab:
Please advice.
Is it wise to plaster the inner walls first before
putting asbestos ceiling in some rooms and POP in some parts?
Thank you

You have said it already plaster then ceilling.

spyder880:


The air conditioners are all 1.5 hp. We made adequate provisions for the wiring, original Nigerian made Cutix cables, 6mm wires were used on all of them to connect them to the DB.

Okay many thanks.

spyder880:
The back and side of the house. .....

Please how many HP are the Air- condition and which mm wire did you used to run the them.

Jamal090:
This tread displays some of our Electrical Installations(Conduit piping, wiring & fittings)

CCTV Installations (Analog & IP cameras)

Inverter installations

Some of these are ongoing or completed projects

Call/chat us up for your Installations 07068736170, 07010816900

Please is 10mm wire okay to run water heater or 2 Hp Air condition.

Hello electricians in the house please is 10mm wire okay to run water heater or 2 HP of Air-condition.

Timtol:
Morning here and Happy weekend.
Work resume on Thursday (Yesterday) but met some issues on ground with robbers trying to steal our pumping machine and more than half rings stolen despite the plans we made to secure the place.
Given community water and regretting a later.
The machine was removed and the pipes broken,wires were cut and many more.
Then: Out of bound to fetching of water on this site.

Sorry on this bad incident but l think the site was fenced.

EmekaDesmond:
Good morning all. Please I have a question, and would appreciate a helpful answer..

My wife's NYSC Call-up letter is bearing Rivers State as her State of deployment, but the Orientation Camp address is the address of Akwa-Ibom State NYSC orientation camp address.

Where should she report for her orientation exercise?

It starts the day after tomorrow. Thanks.

This is not NYSC forum go to NYSC l am sure you will get the answer.

dubemcapital:
Nigerian wire is still the best for now, here are the list of wire for the whole project :


1.5 mm G -- 8 coils
1.5 mm R -- 12 coils
1.5 mm B -- 8 coils
2.5 mm G --- 2 coils
" " R --- 8 coils
" " B --- 8 coils
4 mm. R -- 2 coils
" " B --- 2 coils
6mm. R -- 1/2 coil
" " B ---1/2 coil
10 mm R --- 1 coil
10 mm B --- 1coil
TV cable --- 2 coils

Totaling = (I will fill in once I consult record)

please I can not see 16mm wire on your list.
What is 16mm wire use for and which one did you use for AC.

ChiefSupplier55:
price call me 07016144456

why is it always difficult for Nigerians to give prices of goods online .

Focusmind:


I like this white one. How much is it and how much is your white American wooden doors

why is it always difficult for Nigerians to give prices of goods online.

chizagi:
best quality long lasting steel, wooden, bathroom doors

Pictures and prices please .

Timtol:

5 Chinnese truck,with the excavated ones before rammer then after rammer a tipper of sharp sand to top before rammer again.
You can deduct your answer from there.
Thanks

wow!!! Many thanks.

Timtol:
The site is getting different gradually as the fence start coming up and the building taken shape. Filling finished but because of the rain that rained heavily in Lagos/abeokuta axis we need to top it up.
Machine was unable to move on the laterite soil which caused a major setback.

please how many trucks do you used for filling and at what price per one.

BuildingEngr:

What’s the total square meter?? That will determine the cost.. call or WhatsApp 07033876712

How much is per sq m and where are you base please.

Adedward:
u can used correct wooden doors it will not pass that price

Please which wood is that .

saydfact:


We did surface wiring so it wasn't expensive at all..... Conduit wiring are usually more expensive but I think we still spent close to 400k on tbaf... Including payment to PHCH, pole and related expenses.....

Thanks

okay many thanks.

saydfact:
Our wiring was done with Nigeria Cables.....


this is one product you cant compromise on - for whatever reason..

Dont just try it...

please like how much did you spend on the wiring only, if possible list of the wires.

spyder880:


Yes we did.

Thanks sir

spyder880:
We've hung all internal doors. .....

pls did you fixed the doors before tilling?

spyder880:


The total cost for the doors and frame plus keys and handle with staples is N24,000.00

Many thanks.

spyder880:
We've hung all internal doors. .....

Please how much is this doors and is this frame.