timesup234:
This is a small house from the number of windows I counted on one side. A four bedroom duplex can be built for 18 million to 100% complete stage. If you check my previous posts you will find out I have been giving the cheapest quotations on this thread. My problem is with that dude who said he built his house to roofing stage with 850k land inclusive

Hordbaz:
For tiles installation Contact us on 08028543646 /Whatsapp 08114178911

twinskenny:


what make of cable is this?

topsy23:



The quote can only be questioned IF the plan of the house is available...

2.5mm and 4mm quantities are okay based on the size of the building and am very sure each room will have AC including sitting room and each toilet will also have water heater...

The only quantity that looks suspicious is the 1.5mm red BUT if external light as included it's okay... Also I noticed that there is no green or yellow colour which is the earth cable in 2.5mm and 4mm cable .

ChiefSupplier55:
Steel doors here

Dfameguy:
[Hello Nairaland am osinachi by name i deal with buildingmaterials such as tile granite marble doors sanitaryWare

Here are some of the tile and their makes

THE SIZES OF TILES

1200x1200 made in spanish

600x 1200

100x 100

600x 600

800x 800

4500 x 4500

4500x900

7500x 7500

300x 300

400x400

Type of tiles

Verified tiles

Porcelain tiles

Ceramics tiles
ETC

Swimming pool tiles

Quarry. Tiles

Bricks tiles

Mosaic tile

I.E

Floor tile

Wall tile

Glossy tiles

Maths tiles

All size and colours are available


Makes

Spanish

China

Italian

Nigeria

India

Contact us with this no 08182369377(WhatsApp ) or email osinachicolins20@gmail.com
Our office location is at divine plaza Odu-nade market opposition GTB bank Odu-nade b/stop orile badagry express way Lagos

We here to offer you reliable services with affordable prices

dotman10:
Hello people!

A trial actually convinced me

Not long ago on this platform, I requested for a professional Carpenter and aluminium roofer for my mini 3 bedroom project, and got contacted by ADEDWARD, whom I initially doubted for some reasons. One of the reasons for my doubt is that he quoted far below others and even when I still choose to reduce the quantity quoted, he promised to work around it and still make it work. Hence, I was afraid he might be a scammer.

I read some comments about him here and some have actually criticized him on this same basis. Yet, I still chose to work with him because when I engaged him, he sounded like someone who knows what he is doing. More so, he was the only one reiterating to me the importance of using quality wood for the roofing and the negative consequences of not doing so.

In a nutshell, I decided to give him the job and alas! He proved me beyond reasonable doubt. I am a very hard person and he was able to manage me still, even when I call him with crazy voice complaining, he will calm me down and tell me I will be happy at last. I know such quality is not common with people with such hand work as I have worked with few.

I will always recommend him to friends and family, and to you all nairalander with similar projects now and in the future....

TheLawyer:


Do you actually mean a land document?if yes, it's better a lawyer does it. But if you mean land verification, Yes, we can do that. It involves many things depending on the property in question. A lawyer is better to do your verification because of the many things to check during verification / investigation. And most times we work with surveyors. You cant do without a surveyor when it comes to land transaction.

My client was interested in a property. so he showed me the documents and sought for my advice. After going through it i advised him not to purchase it and he was surprised. he expected me to do some Jack Bauer stunt before coming into conclusion. He asked why I submitted so.

After going through the document I realized that it revealed that the original was missing and also, the so called photocopied deed of assignment was not even signed. I told him to run away with his hard earned money

segzy14:




Is this a turkey door ?
A good turkey door doesn’t fade easily, it is made of steel and can’t be burgled easily.
I have installed turkey doors for various projects and they are still fine.

segzy14:


What is the height of the fence?
What has been done and what is left?

You can chat me on WhatsApp:+2347035596641
To give you a precise estimate for materials and Labour or you can visit this thread.


https://www.nairaland.com/4277674/process-materials-required-fencing-property
.

money121:


@chizagi can you come and defend this!

emmadejust:
Turkish security doors

segzy14:



Many of us don’t pay attention to the general notes on our structural design, it is always stated there by the structural engineers. For example, you can’t use 3/4” for casting of parapet.

chizagi:
dpenedable long lasting steel, wooden, kitchen, bathroom doors

chizagi:
original long lasting steel, wooden, kitchen, bathroom doors

castrokins:
I have been a tenant for the past 4 years at a property and just a month into the 5th year. Before the end of my 4th-year tenancy, I made a deposit of more than half of my annual rent, say 75%. But the property owner is threatening me with notice to quit just the month after the end of my 4th-year tenancy. Note that my 4th-year rent expired in April 2019, the deposit I made is effective from May 2019 and the notice came in yesterday. What do you advise? Do I take my deposit and quit? In the threat notice, it is claimed I am a tenant at will and I have discovered a tenant at will is one who's holding on to a property after the expiration of rent. Given that I made part-payment to renew and it was accepted, is it right for the owner to claim I am a tenant at will??

mountmoriah:
there are two ways to do these art works, and I will show you, but please, follow the details carefully, we have precast and direct designs.

Precast are design from the floor with moulder then hang to either the windows, parapet, wall belt, angle e.t.c, precast in the second picture, but in this Case, this for parapet, but the same way, the window hood, belt, and Angle, e.t.c will be done in precast.

Direct window hood in the first picture, picture don't lie, I believe you understand.

They are aesthetic beautification of the exterior or interior of house or building, with pure cement and little sands.

1. Window hood

2. Angle Designs

3. Wall belt

e.t.c

I do windows with materials 4x4 windows precast for N4, 500, without materials N3, 000 ( Lagos and Ogun)

Check my signature for further details.

Olatunji67POP:
My name is Olatunji, a POP expert. I am into POP artworks and designs

Please consult me for your POP artworks and designs and you will NEVER regret you did. For superb works and affordablefees, I am at your service sirs and ma'am. phone number:07062567817

Nozzle:
There has to be a standard for labour pricing, so we dont under-price workers and over-price clients. Funny enough there are more supply of labour in lagos than anywhere else, yet our prices are still roof-high.
@goodfaith,

i sent you a pm.

i have a project in ibeju lekki that am about to plaster, a 4bedroom duplex and a twin 2bedroom flat. i try to avoid labour from that lekki/ ibeju lekki axis, from experience , so i decided to cross water and get one from ikorodu. when the guy give me bill, i was in shock!.

1.65m internal external and fence!!. (i am pretty sure he saw the size of the building and ofcos the building was in lekki/ibeju lekki axis)

i told him if i see any client give him that kind of money for plastering, i myself will go and learn how to plaster. after a month he is begging for 700k! i still feel i can get it cheaper.

we grind hard for this money.

Bro, have you seen the guys pre ious work? If he is good please you can send me his no as well. That is if he eventually does your work and you are satisfied then I will use him too

bixton:


Oga,
There's no need to argue the price. They are the ones doing the job.

Let them say how much is per partition or if its daily pay, how many partitions make up that pay?
And how many partitions are in the said duplex?

cash1115:
hello all,
I've noticed many people complain about the frustration of getting P.O.P contractors to give a rough estimate of a building. I've been called scam and such countless times simply because i asked for measurements instead of just quoting something off my head like those in the plumbing, wiring or roofing industry.
The thing is that ceiling differ from all the above simply because measurement depends on a number of factors. Lets say you need a rough quotation for a 3 bedroom flat we have to take into consideration how many other rooms are inclusive i.e laundry room, waiting room, living room, store, walkway, verander, balcony and en-suite. the sizes of each room also matter. Sure, rough estimates can be given if we are able to see the rooms physically, even without measuring.
Therefore,what we do is give you the price per square meter and we go from there. let's say a square meter is #3500 and the square meter for your bedroom is 50, that's 3500*50, and then you do the same for the other rooms. That's how you arrive at the final quotation. I won't just give you an amount off the top of my head simply because you say it's a 3 bedroom flat.
Mind you, the price per square meter is the workmanship and the material. you are not expected to provide the materials.

temi4fash:
8

Dats a big something

God would bless you

temi4fash:


How many bedroom duplex is this??

Adedward:
[quote gud mornin here, happy easter, its me A AND S ALUMINIUM VENTURES, as we are celebrating easter , and we should plan for how to get windows done, with us here,

Dominionng:


It is charged per sqm. Volume, location and most importantly type of design are major factors in deciding rates per sqm. Don't let anyone deceive you that there is a fixed rate per sqm for POP ceiling.
There is what I call
Budget designs(image 1),
Average design(image 2) and
Luxury design(image 3)
In budget designs, one is expected to use a bag of POP cement for 2.8 - 3sqm, 2 - 2.5sqm for average designs and 1 - 1.5sqm for luxury designs. So, since materials involve and time to achieve these designs ain't same, it is expected for rates to vary. Talk of quality ceiling or POP Precast vs Plasterboard is a discussion for another day.
At the moment based on the present hike in POP materials, you can get a good ceiling from 4,000/sqm. Maybe a little lesser if your project is in the eastern part of the country(POP materials is cheaper in the east at the moment).

Adedward:
depend the kind of one u want, am doing ordinary stainless, 20k with glass_28,k and framless, 40,000, with 10mm glass per square meters