Richdotcom: Good day fellow nlader, I am about getting a car which happens to be a naija used car, but I heard a lot of sad stories that the engine might be ringed or gearbox might be dead.... How do I identify a ringed engine, if I run a scan will the problem show up?
Thanks
Do a relative compression test and check the engine oil. For a ringed engine,so far the ringing is done by Kazeem, the compression of the cylinders will never be even and then a newly ringed engine oil will still be fresh . If you need a professional to do thorough vehicle inspection of all the vehicle system backed up with a comprehensive report that will give you the true value of the car so as to have the best bargain with the seller. Call autologic @ 08061166316.
airfresher: Please my good people in the house, help me out on this issue,I have a citreon evasion 1.8i 1998 newly rebuilt engine.For the first time we want to start it it refused to start,first we thought that is fuel pump,but the fuel pump is ok. The mechanic just told me that there is no current in the plugs,which may be reason why fuel pump not getting current too.So he said we will look for a rewire that will check the problem.but i want to get first hand information here before meeting the rewire,so that when he start speaking latin i will know where to wait for him.please i need advice on this.
You get "'spark"" from spark plug not "current".The topic of this thread will more will more meaningful if you can replace the word "current" with "spark".
gbolly707: Good day, i drive a toyota camry 2000 and i scanned the car and i got the following codes P0300 --- random/multiple cylinder misfire detected P0171 --- System too lean ( bank1) P0128 -- Coolant thermostat ( Coolant temperature below thermostat regulating temperature) P0420 ---Catalyst System efficiency below threshold ( Bank 1) p0440 -- Evaporative emission control system malfunction P0441 --- Evaporative emission control system incorrect purge flow P0446 --- Evaporative emission control system vent control circuit malfunction P0136 --- 02 sensor circuit malfunction ( bank1 sensor 2)
the app also categorised problem areas as 1) catalyst 2)Evaporative system 3) Oxygen Sensor 4) Oxygen sensor heater 5) EGR system
Gurus in the house, I need help interpreting these codes and of how to explain to a kazeem what to do exactly Thank you
This is beyond what a kazeem can handle .Pay a learned professional techie to fix this for you. Call autologic @ 08061166316 if you are in Lagos
Etoo: @honmusa, my mechanic has started the elimination method today. He replaced the MAF sensor and advised that i drive the car till Saturday ( since i drive only from home to office and vice versa) for the smoke to clear. As im waiting for that, I needed the gurus in the house to inform me whether the effect of d change is supposed to be immediate or gradual. Thanks
why are you complicating a simple procedure? I said start from the O2 ,remove it (dont change it),run the engine and check if you still have a black exhaust smoke. It an immediate thing !!!!
ozor1: you said the plain truth bro ,I appreciate them in every way I can
If you can be appreciating somebody that use trial and error to resolve problem in this 21st century in a open forum like this then I will have to concur that there is no hope for science and technology advancement in this country again .This is indeed a lost generation !!!!
https://en.m.wikipedia.org/wiki/Oxygen_sensor From the name you can easily guess what it does. It analyses the o2 content in the exhaust charges to send an input data to the engine computer module to make a decision. The decision the engine computer depend on the types of o2 Sensor feeding it. Upstream O2 sensor:This input data from this types sensor is mainly for fuel management system decision making. Downstream O2: This also serves as fuel management sensor to a certain degree but is mainly for catalyst monitoring .
erico2k2: ok now I have a bit of time, I will explain a bit I presume your sensors have 3-4 wires if so its a heated sensor when your sensors was tested was it in the cold with a volt meter? if yes then reading 5-6 means its dead, the pure test for a working heated sensor is for you to heat the sensor with a touch flame and read it it goes up when very hot and drops back when you stop heating it.here bellow
This method is too crude to ascertain truly you if u have very efficient running O2 sensor. Best method is to run a live data on the o2 sensor and intentional introduce lean and rich condition and watch the o2 sensor response.
princemillla: Pls elucidate further. Which fan, the rad fan?
And if it's connected direct, how should I correct it. Pls Can't cope with this 3k fuel from sango to ikotun anymore
If you radiator is directly connected ,take it to a competent technician that can revert the connection to factory default. If you are in Lagos ,you can call my number @ my signature for that .
This topic has been thrashed several times on this forum. The ultimate aim of any vehicle powertain system is to achieve 100%(14.7:1) stoic ratio which is the condition where your car will run at optimum condition with lowest possible emission and best fuel mileage without unnecessary running lean. To achieve stoic condition ,the principal condition is temperature and fuel trim which is being managed chiefly by the following sensors: engine coolant temperature sensor and Air fuel sensor. To achieve stoic ,your car system need to switch to close loop condition from open loop and the faster this can be achieved the better for your vehicle emission level and fuel mileage . However if you put your car in a condition that make your vehicle system to remain at open loop or slow to achieve close loop due to overcooling of your engine (fan running direct,thermostat removed etc )then expect to consume more fuel than necessary accompanied with more emission release. Apart from higher fuel consumption ,running at open loop for a longer time will destroy your engine faster as thorough and adequate engine lubrication will be never be achieved.
Etoo: @Honmusa, pls can u name the sensors and the locations on the vehicle so that I will start off with the elimination method. Thanks for ur concern
Start with O2 sensor ,disconnect all the O2 sensors(upstream and downstream) from their connectors and check if you are still getting the black smoke from your tail pipe. If you don't get the location ,call my number @ my signature.
0rex: I have seen ECUs do all sort of things to a car that's why I recommended trying with another ECU readily available not buying a new one. Take note, OP.
Every troubleshooting follows a sequence .Follow your trace from the bottom to the top,from simplest to advance,from input to output and not the other way round . This is will enable you to make a faster and a definite diagnosis .
0rex: I have seen ECUs do all sort of things to a car that's why I recommended trying with another ECU readily available not buying a new one. Take note, OP.
I have said it before ,what you have is likely a input issue.If you are feeding wrong input data into your engine controller computer definitely you will have an alter air/fuel stoic ratio which can be in form of black smoke or lean running engine. If you lack the skillset to run a live stream on your powertrain ,use the procedure of elimination by removing all your sensors one by one and checking against the black smoke coming out of your exhaust until you find the culprit responsible for it. Leave your ecu and injector alone ,concentrate on the sensors first .But if you insist on Kazeem system of throwing parts to to resolve issue ,I am readily available to supply you a many ecu as you want .
Etoo: Hi, I just finished from the mechanic, its not an oil sludge. The electrician said since no engine light is showing, there is no need for the diagnostics. The black smoke still comes out on higher acceleration and the fuel is highly affected.
I dont know whether the injector can be the culprit. A mechanic was telling of 2 sensors near the injector that possible could be causing it. Is there any other possibility I could check pending when the check-engine light surfaces?
no need for diagnostics since no check engine light ?? Please run for for dear life from that Kazeem that utter such gibberish cos he doesnt deserve to hold a spanner.
Precoris: I use a Nissan sentra gxe 2003. The car has been given me problem. The problem is stalling. I took d car for scanning and d scan detected blocking and knock sensors. I changed the both sensors d problem is still persist. Now, my rew,ire said I should buy another brainbox and coil. My question is could buying new brianbox and coil stop d car from stalling?
By the time that rewire is tru with you ,you would have finally swap everything on your car and the issue with still persist.Most of this clowns lack the proper technical to do a definite diagnosis and they only swap whatever error code show up on their scanner . Patronise a competent techshop to accurately diagnose and resolve this isthe issue. what you have is more likely ignition related /camshaft/crankshaft circuit issue. call autologic @ 08061166316 to resolve this issue for u .
Precoris: I use a Nissan sentra gxe 2003. The car has been given me problem. The problem is stalling. I took d car for scanning and d scan detected blocking and knock sensors. I changed the both sensors d problem is still persist. Now, my rewire said I should buy another brainbox and coil. My question is could buying new brianbox and coil stop d car from stalling?
erico2k2: Re kitting you Cat converter was waste of money as you just succeeded i n choking your exhaust system I'm sure they just used ordinary wire mesh.The core substance in your converter is platinum and Rhodium, one is oxidizing the other is a reduction agent..Your cat converter is just to treat deadly and harmful exhaust gas into less deadly and harmful exhaust gas B4 it passes to the atmosphere.As for your fan wired Directly, I'm struggling to see the relationship of that with your problem
Fan directly connected definitely contribute significantly to a car fuel consumption .Some cars will perpetually remain in open loop condition and some will take forever to achieve closed loop .The effect will spell doom for that engine apart from high fuel consumption.
tutuwater: I woke up yesterday morning to th horror of finding out that a thief had access to my car and was able to steal the ECU/ECM and the controls for the power windows. My car only have an immobilizer. My question is what are the best measures I can take to safeguard the ECU and car from vandals and theft.
Get a security device that can do intrusion detection function by sending a text message or sounding a alarm anytime you have external intrusion on your car even a mere touch on your car lock will send you a text message of a possible intrusion. Get tramigo T23
Pls I have this issue of my car bringing out black exhaust smoke after start up and whenever the throttle is matched on.
This is giving me a big concern considering the fact its a recently purchased vehicle and no "check engine" light is showing for me to diagonise it.
Kindly help me in your suggestions on how to rectify this. CC. SIENNA AND CO.
You ecu is probably getting a corrupt data from a faulty sensor .Get a scanner and run a data stream to identify the faulty sensor. If you have a scanner ,call my number @signature ,I will put you through to identify the culprit.
kaeforum: Remember i said theres a 50 50 chance of getting a good used engine, you ve been lucky so far.
50 50 chance is for people that are not skilled and are not knowledgeable enough to the right test to conduct to determine the condition of the engine you are buying. I have recorded 100 % accuracy in all the engine I have been buying so far since more than 5 years !!!!! Invest in the required knowledge and skill and you will see far into any dark tunnel!!!!!
Don't bother to recharge with Visafone recharge card as Visafone has already terminated the bb recharge service until you migrate to Mtn platform. You are automatically cut off after the end of your bb subscription period.
steveyen: Please guru in the house I also have this same hard starting issue. I have changed the two camshaft sensors and the crankshaft sensor but it still exhibiting the hard starting behaviour, longer cranking time etc.
I have scanned the car the only relevant code it gave is P0021: Intake Valve timing control Performance Bank 2. The other codes are heated oxygen sensor related codes.
The car is d same Nissan Maxima 2004 as the OP.
Please your help will be highly appreciated.
I will help you resolve this issue . call my number @ my signature.