Olenyi's Posts
Nairaland Forum › Olenyi's Profile › Olenyi's Posts
1 2 3 4 5 6 7 8 ... 28 29 30 31 32 33 34 35 36 (of 82 pages)
Phinity318: i dy gbadun ur job in 3D HD FULL 1020p..Full HD is 1080p bro; 1080p. ![]() |
staddos: Hi Olenyi and other gurus in the house, which satellite is best to use for ones settings during installation of amotorised system? Is it Rascom-QAFR @ 2.9 degrees on C band or Astra 4A/SES-5 @ 4 degrees on ku band? Does it really matter if you use C band or Ku band since there is only one Clarke's belt on which we have all satellites. In your experience which do you recommend? Guys your views would be greatly appreciated.What's the size of ur dish? If its a 1.8 and u intend using ku, u could use intelsat 20ku and nss7 as ur reference points. For a bigger dish say 2.4m, use intelsat 906 3642 V 8545 for ur east and cnn 3983 V 25000 for ur west and intelsat 10-02 4025 V 7324 for ur middle point as ur reference points. Regards. |
Tmvince: My boss @olenyi.. Last month i was a newbie, nw all thanks 2 yhu i've gotten better @ nailing some signals. Buh nw i have another question, pls where can i nail fta channels that shows movies?What of joy tv? Are u not ok with the movies it shows? Regards. |
Sexynick: Pls house,i the use of biss key legal?I should think so. Regards. |
What of cabs/mass transit buses with fleet number 419 or 666? Won't u enter those? Do u check number plates before u enter? |
4llerbuntu: iv been meaning to ask about the loop out port on decoder. does it go into the other TV directly or into another decoder?Its meant for another decoder. Its the RF out that is meant for tv. Regards. |
Seyilome: Oga Olenyi and other ogas pls an installer installed amos 5 for me and I could nt see oromia channel. Pls how do I knw if he included 17e what are the other stations are included at 17e. Peacehttp://www.flysat.com/amos5.php http://www.flysat.com/e16a.php Regards. |
ezo4fta: Pls gurus help me...on my 90cm dish with a 2 in 1 discovering lnbf, one facing multi tv(with quality of 90%) and the other facing dstv(with quality of 79%,78%,77% and 72% on various tps.) But my mbc on dstv with 72% quality is always freezing in d evening .pls help me...Noticed dat myself someday back. Could be from a lot of factors. Regards. |
pboy2buzy: 5).Cctv9----dstv position(36'E)Ur intelsat 20 signals are poor compared to ur dish size. I believe this is from ur lnb skew/dish alignment. But it can be managed. Regards. |
[quote author=GH-ONE]Surprisingly, I used my 4669XII decoder and couldn't hit green on Irib. But when I replaced with 4922A,the green came.[/quote]@pboy2busy. Do take note. @obnelly, How far about ur irib hunt. Do update us. Regards. |
hazard1759: sir, RDV n d oda channels are stil nt poppn..my LNB is @ 8 o'clock..pls help SULIEMAN3: are u sure you hooked up to 16e/17e if yes, check these TPs if any of them is green. 10804H30000 and 12562H30000. But 10804h30000 is currently off.Also u can't do this sitting inside the house. U need to go out and adjust ur dish a little bit up/down till 11024 H 03333 pops up to at least 50-60 percent. Then check again that 11881 V 27500 is still green. Tighten and go ahead to blindscan. Regards. |
Kennethmomoh: Hi guys please help:Can't be done bro. If u have the cash, I would advise u upgrade to an HD receiver like 4922 at less than #10500 for maximum viewer enjoyment. Regards. |
ZUBY77: Watching football... |
mayamiko: is it pssible to track mult tv channels in malawi?and I gave u this reply since 21th olenyi: Check these maps. If ur location is covered, then u can get it. |
pboy2buzy: I changed d dielectric to horinzoltal d tpz went blank,so I had to return it to d vertical,and d signal remained as shown below with IRIB not popin up......what cud b d cause of dis.....please helpRemember a change in the dielectric position should all go with a change on the polarization setting on ur receiver. Also, place that C-Band in such a way that the block head is at 7/8 o'clock. Regards. |
pboy2buzy: My enemies are at it again ooooo.......after misplacing my diaelectric plate,I went to improvise as instructed in d forum (cuttin an "alumaco" glass to shape)....afta fixing it,I got all d rest channels(at 90% except IRIB....I don't knw y it fail to pop up...here are the photosWhoever cut that ur scalar ring for affix the KU did a bad job by cutting it tooooo big. And now, u need selotape to hold it in place. As for the irib, am beginning to wonder why its behaving as it is doing. U are not the first to complain about this same thing here. But try this, Change the glass ''dielectric'' to horizontal from the present vertical position that it is now. And also change the polarity in ur receiver also. Lets see if this will solve the problem. Also try rotating the lnb; first a little clockwise, then a little anti clockwise. Regards. |
We siddon Dey look. |
koonlay5: Good day houseCheck out this link. Go through it slowly and follow the instructions. U can always come here for clarification on any gray areas. https://www.nairaland.com/1337636/pls-me-installation-settings-position Regards. |
Yinka4dad: Guys please what is the minimum dish to track irib tv am in nigeria ibadan.need ur urgent replyAnd u will not bother to read previous posts before u come asking questions here. ![]() Is the answer not just above u. |
[quote author=D.lee]@ pboy2buzy, you need to tweak your lnbf for you to pick that said transponder. If you have tweaked it well, that particular trasponder would have hit green even at 57%. I know you might not believe me but try it and you will come back here to testify your success over this problem. I remember back in the days when I hunted for TPA on that same satellite, my RDV on 12436 was hitting 73% and this trasponder (12245h) that is one of the t.p that has the strongest signal strength was hitting only 60-61%, did you see that? Hey bro,just go up and tweak that your lnbf, there is no pain in tweaking that your lnbf.[/quote]@Pboy2buzy. U've really drawn out all the MEN with this ur problem. Dats good sha. And i've come to realise that u are a bit reluctant to go out and work on ur dish. Is it that u just want a solution u can stay inside ur sitting/living room and solve? Pls don't let this energy we've all expended looking for a solution for u go in vain. Regards. |
Toluwalopemi30: hello guru in d House, pls what Frequency can i use to 16' East and 17'East @ a time.Use this 11881 V 27500. When u hit green, also check to make sure dat 11024 H 03333 is also green. Then blindscan. Regards. |
manshyne: Just received this from a friend: ![]() https://fbcdn-photos-g-a.akamaihd.net/hphotos-ak-frc1/s200x200/267341_544906635576862_339650018_n.jpg |
Guys, Check out this sat http://www.lyngsat.com/Intelsat-901.html Looks like dia are goodies for us in it. Regards. |
odilibe: Seems like you managed to lock eutelsat 36b @ 35.9east parameters only...and not 36a @ 36east parameter..you may need to re-track these satSeems this http://www.lyngsat.com/Eutelsat-36B.html Is what you are getting and not this http://www.lyngsat.com/Eutelsat-36A.html Try to input the tp's 11940 H 27500 and 12275 H 11200. Track with it by raising ur dish a little up and a little down to see if u will pick the signal. Best of luck. Regards. |
pboy2buzy: Nooo I don't receive ibru tvWith dat mesh, u should be getting more than 70% on ur channels. Get to work on ur lnb and see if u can get the signal up to 80-85%. And get back to us. Also I can see u haven't worked on ur C-Band lnb. What's holding u. Get to work bro. This is the weekend. Regards. |
blexxonmak: Okpofu n'agba ewu mana aji di ya n'aru ekweghi ka a malu.Lol. ![]() |
atuama justice: I have aljazeera new cards for sale.if ur intrested call 08072483549.#32000 only.With/without subscription? With/without decoder?? Regards. |
Oga ZUBY I see u. Abeg knack us akpako. How ur ppl for village. Send our regards to them. Regards. |
amingimba: My LokojaNot possible. Try 3m and above. Regards. |
blexxonmak: @pboy2buzy. Blindscan your decoder.@blexxonmak. U've starved us of the pictures of that ur earth station. Not fair oooo. Regards. |
pboy2buzy: I have blind scanned....it brings out over 200 and something scrambled channels@pboy2buzy. Now this your receiver is getting our my nerves. Which kind stronghead is it trying to form. But if u're using a friends box and the problem is still dia. This is what u do; 1) take ur receiver to ur friends place to verify that ur receiver can receive those frequencies. 2) Then disconnect ur Diseqc and connect directly. 3) Now xchange ur lnb with another one and tell us ur result. And by the way, were u receiving those tp's before and it just went off or u never were able to get it? In my time, i've come across two receivers that were hitherto getting intelsat 20ku. Then during a thunder storm, something went wrong. And do whatever u want, it didn't get intelsat 20ku but comfortably picks every other bird. My Regards. |
pboy2buzy: Diz r d pix olenyi: Also select another ku sat and input those freq. Lets see if it will work now. Some decoders have a funny way of rejecting freq's when another freq a little like it is already stored within that sat name. (remember to set ur Diseqc for the new sat)If this doesn't work. Then check ur connection with another mpeg 4 rx. ![]() Regards. |
1 2 3 4 5 6 7 8 ... 28 29 30 31 32 33 34 35 36 (of 82 pages)


...