₦airaland Forum

Akerewe:
Pls am interested in this kind of system, pls how possible is it to pass water tru 12 inch pipe to 1 inch pipe? What could be the method use in achieving that pls?

There are some materials needed for these operation with high skill personnel
Not “DIY” system

michlins:
a four storey building is 45ft, what's the ideal height of the tank stand and how do you intend to practically achieve it

You want me to go deeper on water supply System both in domestic and industrial system. Well it what I know but I will just explain it in simpler form

You see high rise building and sky scraper water supply system connection is a bit critical.
This is it l, most of these high building mostly have there water tank setup on ground floor and a well design transfer pump will be installed to do the job plus booster pump in each section of the building ( the explanation is much and the sep up is critical than what I can explain fully here.)
Again some also do have GIANT WATER TANK with about 12inch diameter pipe from the height of about 100ft with about 100bar pressure to supply any building around the municipal, this system doesn’t need any booster pump to get pressure in any building around bcs all building around will be tapping the water from the 12inch pipe with 1 or 2inches pipe to supply such into the building
Imaging the pressure you wi get from 12 inches pipe to 1inch pipe.
Here is the standard system
You can try visit any 4-5 star hotel or any high riise building you will get my explanation beta
Or any water cooperation around


It’s a whole lot of work ooo

Based on my experience in water tanks installation both in theory and practical.
If you have a building of 20-24ft it’s strongly advisable to do height of 30-38ft water tank.

If your building is btw 9-12ft (bungalow) it’s ok to do btw 15-18ft water tank height.

Here is it in theory and practical
If you need 1-2bar of water pressure which is just AVERAGELY ok for domestic building your tanks should be in height of 12-18ft in a bungalow this will give you 1-2bar which means a bucket of 20lts will filled up btw
2-3min
In practical plumber will run the supply pipe through ground which means the water tank still remain 12-18ft height to supply such pressure BUT if he try to run the water through roof it mean the height is just only 3-6ft which is VERY BAD bcs water heater will not run and shower also.

In case of a story building it’s the same theory and practical.

If your tank is 25-28ft and you run your water through roof same WATER SHORTAGE will happened bcs the height you have at upper floor is just ONLY 5-8ft ( the building height will be btw 20-22ft )
And if you run it through ground then go back up water shortage will still occurred in upper kitchen, shower etc ( it’s real ) means to filled up 20lts bucket it will take like 5-6min at 0.5 BAR mostly when your water reaches half tank … Any body can try this.

Most of my project I usually do 35-38ft ( duplex)
15-18ft bungalow.

Valuepaints20:
@rotecch
Happy new year my oga. I pray God will make you remember me this year and patronize me

I do remember you my oga
Only that we used other’s products for our painting projects, but we shall see what to do about your product ( value paint) soon.

hamtabfawaz:
Looks beautiful ✓


Well done brother.

Thanks chief, how work?

Another one …., now at 95pec completion

Another one 95pec completion

Preparation begins sorting out of best materials in town for the work as usual

More

Preparation in progress
We are using best of materials for all our work here as usual

More pics as we are progressing on painting

BrickDevo:
This house fine, i like the railings design

Thanks brother

Amosaloud:
Please how high was the tank stand/water stanchion and cost of doing similar? Many thanks in anticipation of your response.

Reach out to us on
08066619493 call/ whatzap for more details

Reeefe:
do they use separate pumping machine for each of those tanks. or each flat pumps for itself with their separate machine

1tank to serve 2 flats, each section(2flats) will pump water independently.
It’s only one bore hole that supplied the 5 tanks.

We did same here in year 2021, 8flats

Final laps race of the project pics
Painting now in 70pec stage

Last laps of the race on this project
Painting in progress

10 flats with super mkt

We gives thanks to Almighty God for the completion of the 1st stage of this project.
We also thank our dear client for the journey so far.
Now at stage 2 of this project( after successfully delivered stage 1 carcass)
(Finishings)
Plumbing
Electrical
Plastering/ rendering
Windows
Doors
Etc
Watch out

12 mini flats

folmus:
Waiting!

Pics will be uploaded soon.
But before that we have this coming soon ( 12 mini flats )


We gives thanks to Almighty God for the 1st stage of this project.
We also thank our dear client for the journey so far.
Now at stage 2 of this project( after successfully delivered stage 1 carcass)
(Finishings)
Plumbing
Electrical
Plastering/ rendering
Windows
Doors
Etc
Watch out

We gives thanks to Almighty God for the 1st stage of this project.
We also thank our dear client for the journey so far.
Now at stage 2 of this project( after successfully delivered stage 1 carcass)
(Finishings)
Plumbing
Electrical
Plastering/ rendering
Windows
Doors
Etc
Watch out

Bring your imagination and let’s turn it to reality

Painting resumed here

Another one loading

Installation loading

Still on

New month new deal we are here for your construction work

2023 … still available

Update

Available

uncleteeh:
Well, to the best of my knowledge, I know a Nigerian who owns a quarry in ABK, he employed some Chinese to work there, maybe that's what our people do.

Like2 people in Abeokuta.
You are right

Reeefe:
this makes more sense. whalai. easier to clean n best presentable

Thanks chief

Charisdesigns:
This setup looks neatly done

Kudos

Thanks brother

Reeefe:
I have an observation I want to know more about our bathroom plans in 9ja. most houses with bathroom n toilet space of about 4ft by 8ft usually rectangular. like putting the wc toilet at the end and then putting the shower in the middle and the washing hand basin in the beginning. main while. it's actually better to put the shower at the end wc in the middle and washing hand basin at the beginning, this model makes it possible to either install a glass or shower curtain to separate the shower area but it rarely done that way. IS THERE A JUSTIFICATION OR REASON FOR THAT?

It boiled down to the designer reasoning and client choice .
I have done some in the past and present like the way you explained it .
See attached pics