₦airaland Forum

still available

MAKE: TOYOTA
MODEL: camry
YEAR MAKE: 2003
COLOR: Dark Gray
INTERIOR: Fabric seat
Air Bag: 2 air bags
LOCATION: Lagos
MILEAGE: 98400
VVT-i, 16 valve
direct from US,
full costom duty paid and complete papers.


Call/Whatsapp: 08081780767 for more details.

PRICE: #1,800,000 NEG0TIABLE

Hello,
what the cost to clear Toyota 2004? what your email. Thanks

ShyCypher:
I didn't mean to insult you but you never included this fee up there na so how would I know?
I'm interested but I have to know what i'm up against before venturin' in...

That's why I asked for clarification.

Please can I get quotation for a typical car (let's say $1000 max)? Thanks.

Good day,
Do you have between 2008-2011 Toyota carmy? what the price. A clean one pls.

Thank You
Sako

Hmm

In as much I don't support Lagos state, Bash Ali has ridiculed himself with some Abuja demonstration ( there are better way to get attention). Mean while holyfield foundation gave Lagos $3m to support boxing.
Help me ask bash Ali if he has any foundation, with all those money he made. U chop alone u toilet

Sir,
Can one mix the two. Like the block type at the water sink area and the wood ones at any other place.

Thanks

quote author=rotecch77 post=56286698]my own advice is, if it's commercial house in a middle or low class area use block type
*easy to maintain
*cost lesser
*very durable

I used same method here[/quote]

[quote author=bzm7 post=56229819]@sako28 Please I need theses doors too in PH. can you link me up.

[/quote

This is the welder number 0703 879 8438. You can call him and discuss with him. His workshop is at Agip estate side of PHC.

Muyesky:
A nairalander ordered steel doors for Port Harcourt ready to be delivered.

Oga,

how much is this steel door, for 4ft and 3ft.

Thank you
Segun

No problem my brother. Will give you the welder contact. Both of you can go to the kala steel market together and make ur choice. His workshop is at Agip estate.

Cheers

quote author=Truthinlife post=54099240]
Solid bro, I love it.
Will contact you soon.[/quote]

Oga Hajji,
My welder did it. It a 3ft door for kitchen. Bought the door plate November 2016 for approximately 9k, but now same plate is like 14k. All steel materials for the 2 doors cost approximately 70k(nov 2016 price).4 liters Anti rust for the 2 doors as at January 2017 is 3200 naira. And are PH price

Thanks

mufutau55:
Very good door. I like the design.
It will be nice if you also include net on the burglary.
So how much this cost for the 3ft or 4ft door?

Hajji M.

@truthilife, just finish installing my iron door in PH.

skimmer01:
Gate fabrication

Sir,
How much for this gate.

Thank you
Sako

NairaBaba:
Thanks for the observation, the only reason we installed to that height about 2meter is because of children horseplay. We will review it.

Oga,
I know that the reason for that height is because of the children, but is better to be on ground, for them to play with it than Up to fall on them. Below is a chart for you to understand the impact when that stuff drop. I will suggest you cover the cap and mouth of the fire extinguisher well and secure it well close to the floor. Im talking from experience, i face drop object accident on weekly basis most never give warning sign. Just find a way out to make that area more save.

Thanks
Sako

Truthinlife:
Thanks Empiree for your response.
Guys, I have asked this question directly at nairababas building thread but no one responded.

Can anyone please give me contact of a welder or where I can get these iron doors..pictures below; in Port Harcourt or any closer city around it. They look solid and fanciful. I will need 6 of the doors. I will appreciate any leads from anyone reading this. The sample pictures are as shown here... Hajj, nairababa, I hope you don't mind me displaying the pictures in this thread; I can delete them if you think otherwise.

Thanks.

Bro,
I am doing 2 doors like that in PH. should be ready in 2 weeks, i will share the pix, and if u like it,i can link you up with the welder. I prayer that he come up with something cool and nice.

Thanks
Sako

NairaBaba:
Updates

NairaBaba,
Nice work you have done. One thing you need to correct. That fire extinguisher height is a safety hazard. That a drop object that can cause serious injury in future. Fire extinguisher of this size or weight should always be at knee level or maximum waist level (appx 1m).
Nice job sir, God bless you
Sako

spyder880:
PVC ceiling started in this house.........

Sir,
What is the price of the Golden Ever PVC and how will you rate them when comparing to innoson pvc.

Thank you
Sako

Sir,
It will be good if you can add price to your pix. Some of us in the house will be interested.

Thank you
Sako

Slikbae:
You are right. Those saying all manner of derogatory things are actually the naive ones. How can a European nation or any other country stop another country from achieving food sufficiency. They haven't even stopped north Korean leader from making nuclear weapons. Most of our rice is imported from Asia, not even Europe. Why does the black man blame the white man for all our woes. Its really baffling.

My Brother Wakeup. why did USA support Sivimbi and Russia support Jose dos Santos back then In Angola? Read ur history well and u will see world politics is a different ball game and everyone protect their interest and what they will gain.

Sirs,
I received this quotation for casement windows.
1500 by 1200= N 32,000
1800 by 1200= N 34,000
1800 by 900 = N 32,000
1300 by 900 = N 24,000
1200 by 1200 = N 25,000
850 by 1200 = N 20,000
800 by 700 = N 13,000
600 by 700 = N 10,000
900 by 1600 = N 22,000
Is the rate okay?
Advise is welcome pls.

Thanks

Muyesky:
Jgf

Sir,
how much to get this door from you

Thanks

Hajji,
Thanks very much for the infor.

Cheers

mufutau55:
Material Descriptions
Copper Tapes - 25 Meters @1,500.00 = 37,500.00
Earth Rod @5,000.00 = 5,000.00
Copper Mat @ 4,500.00 = 4,500.00
Arrestor Copper @5,000.00 = 5,000.00
10mm Fable Cable-10 Meters @N250x10 = 2,500.00
Industrial Salts - 1 Bag @ 2,500.00 = 2,500.00
Charcoal @1,000.00 = 1,000.00
Total Materials = N58,000.00
Labor = N12,000.00
Grand Total Paid = N70,000.00

Above is what I spent on a Duplex building... for bungalow the Copper tapes should be like half (13 linear meters).
Hope this helps. The only thing I noticed is too much Labor... maximum should be 15k.
And make sure they are using real copper...

Hajji M.

Gurus in the house, i received the below quotation for thunder arrestor.
1 Copper tape=1600 per meter (need 22 meters)
2 copper mat=4000
3 thunder arrestor=7000
4 copper clips=100
5 copper nail=100 per pair
6 copper earth rod=4500
7 Industrial salt= 1500
8 Charcoal = 1000
9 10 set of clip and nails= 200 per set. (2000 Naria)
11 workmanship = 30,000.
Any advice please.

Me Four ooo,
If it good price and deal. i will order right away.

mufutau55:
Me three o.

Hajji M.

princejones:
0.55mm = 2030( Steptiles), 2060 ( metcoppo)

Thank bro,
Nice work you are doing here.

princejones:
what guage and which type of Aluminum coil,e.g first ,tower or foreign coil

Bro,
foreign coil of Steptile and Metpoco( 0.45 mm and 0.55)

Cheers

princejones:
“Never continue in a job you don't enjoy. If you're happy in what you're doing, you'll like yourself, you'll have inner peace. And if you have that, along with physical health, you'll have more success than you could possibly have imagined.”at the factory today

Bro,
Nice Job. How much is foreign Steptile and Metpoco going for now.

Thank you

Madam or Oga please PACK well, that one na story. Never do anything that will question your integrity.
Pastor we dey drink dark color liquid for hotel lobby without any bottle in front of him. How can we prove that is not alcohol?
Watching the drama in 5D and HD. And remember God is watching us and nothing is hidden from Him.

@Hajii, Please try your best to bring order to this trend, we are not learning again here.

Thanks

lastpage:
OPEN LETTER

Good Morning everyone.

I am the wife of Lastpage.

As husband and wife, we use this same account on Nairaland.
Sometimes, l make it known that it is a female/wife that is posting if l think there may be confusion. Other times l dont bother.


I opened the (Give birth thread) that has been quoted as Lastpage (My Husband) sometimes ago, to assist my former school daughter when she came up with the idea of giving birth abroad and asked me for assistance. I could not help her directly because we are not related so l promised her l would help her get information from people with similar experience. She insisted she has the money to fund it and kind people volunteered all those information and many other people that l dont know, as you can read from the responses, also benefited from the information provided.
This is why my husband (Lastpage) insisted that l should not delete the thread otherwise l would have done so a long time ago.

She gave birth in the U.K, paid her hospital bills and all was done and documented properly.
As luck will have it, she also won the Visa lottery in 2012 and eventually relocated permanently to the US, with her child. she has three kids now.
This is the summary of it.

Now, l have been reading things posted by some posters here which at best is uninformed and just mischievous.
I cannot stop anyone from making any post they want to make so, they can continue to make the post till kingdom come.

I had a serious discussion with Lastpage himself about his exchanges with some characters on this particular thread and l have made it clear to him that he does not need this sort of lowering himself, to the level that others have put themselves.
At least, if children are behaving as children, what about him? Should older person not know better?
Anonymously and online, people would say things they dare not say in person, because they dont have to defend it.

He takes to Nairaland as entertainment and unwinding but l have made it known to him that even at that, he has to carefully chose those he responds to. There is a limit to such things.
I wrote this to clear the air once and for all, with regards to many people who hold him in very high esteem on Nairaland.

Those that want to hold unto their rumour (one even said he is a woman, one even called him Brabus, imagine?) are free to do so, since that is their upbringing.
I have specifically pleaded with him to ignore those who are like children here but he is still free to have an adult discussion.
That is why l am his wife.

I will not respond to whatever insult as l cant identify the person making it.



Lastpage (Mrs)

Dieumerci:
Sumo is the product name of Standard Aluminium.
I have used it once and no issues since then.
If you intend to use the step tiles, go for 0.55mm otherwise use 0.45mm.
They are more pricey than the Chinese imported ones.

Thanks bro

Dear all,

Have any one use Sumo Aluminum product before? What the experience like and what gauge will u recommend.

@ KolaShangOne, I need your professional view on Metopoco and step tiles of Sumo

Thanks

Dear all,

Have any one use Sumo Aluminum product before? What the experience like and what gauge will u recommend.

Thank you

Sako