₦airaland Forum

You can only get the best of services if you involve us in your project

Good morning to everyone

call us for your project

Always attention to details .

Call us today

Jokay07:
Good morning everyone here,
Please I am in need of a service of a professional Architect for a complete drawing of a big building for my company
It's urgent.
The work must be delivered within 2 weeks

Good morning, You can contact us for detail MEP design for the company.

Our contact
Whatsapp or Call 08033643191


You can also check our thread with the link below.

MEP DESIGN
https://www.nairaland.com/1804476/complete-package-design-drawing-mechanical/11

MEP INSTALLATION
https://www.nairaland.com/1233943/contact-us-electrical-mechanical-plumbing/40

DISTRIBUTION BOARD
SALES, INSTALLATION, TERMINATION AND CABLE MANAGEMENT
https://www.nairaland.com/2668061/abb-distribution-board-schneider-distribution/10

https://www.nairaland.com/6980507/distribution-boards-final-sub-circuit

Charisdesigns:
Weldone boss

For enlightenment purpose
I have noticed this old trend of electricians placing distribution boxes in kitchen, despite all the hazardous warning that comes with it.

Is it a case of not working with an electrical drawing or Ignorance?
Thanks

Not sure there is design drawings for the said project . Most of my design always have distribution board in the lobby

walexProjects:
Plumbing..
We are still available
Phone or WhatsApp - 09073657369

Weldone boss, hope you know that isometry is very important in Plumbing design these days before approval. This is a new system from government now

Always ready

Use this opportunity to order for your cables

dare111:
Can I get a building Engineer to prepare for me a BQ at Ibadan. Oleyo precisely..
if you can do it let me know so that we can roll together.

Why can't you involve professional quantity surveyor for a detail boq.

You can contact us for detail Mechanical, Electrical and Plumbing Boq also

WhatsApp or call 08033643191

Architects, structural engineers and everybody in the house what can you say about the building

mangolpupa:
Any electrical in the house, available for work? Location will be East. If interested and available, please drop your details and I will reach out.

For the earthing ?

Call us today

Call us today

BrickDevo:
Thank you, am surprised you are saying this but it's well.... If not that i brought it here the client wouldn't have paid and that sit right with you... It's okay,

you kept people on site for extra 4days without telling them why, did you not tell them why or at least plead with them to understand,

keep ignoring the fact that i said it repeatedly that the client refused to tell me what the delay is even when i asked twice, but could come on here to explain why, to me it is a total disregard and disrespect to my person, and to be honest i won't treat a client that way or any other person.
I will do whatever i can to ensure that a client won't drag me here because i delayed to send his drawing after payment has been made 2days earlier. But the said client after 48hrs refused to pay and even when i brought it up here, still refused to pay, it took the comments of people who understood my case for him to pay.

I respect people here, and if you check in all my comments and complaints i never insulted anyone, you want me to apologize for those who were insulted because of the issue.... It's well.

I appreciate everyone who contributed to this issue, to those who were insulted, sorry i apologize to those who indirectly insulted me said i was immature, well thank you also

Oga BrickDevo you would have giving some days like 2weeks before bringing the matter here. The time is too short anyway. Thank God you even have his nairaland username, I have done MEP drawings for a client on this forum and decided not to pay one kobo . I printed the drawings, stamp with Coren seal, bind everything together and handed over all the drawings to him including the PDF. He sent somebody to come and collect it and promised to transfer my money immediately he received the hardcopy. Since last year July the man did not pick my calls again and he also block my all numbers. He is from Nairaland and i don't know his username.

mangolpupa:
Any electrical in the house, available for work? Location will be East. If interested and available, please drop your details and I will reach out.

Engr Tope
WhatsApp or call 08033643191

sethtsadopp:
Thank you. My concern is the fact that the closet doesn't have a door so alot of the cold air will be going into that place too.

It will 2HP AC can cover an area up to 25msq and looking at the dimension the total area is less than 25msq. You are good to go for the 2HP.

sethtsadopp:
Please is one 2HP Inverter AC manageable for this Master room?
Note that the door has been moved from right after the stairs to the main entrance of the room itself (after that sink) so the lounge is separated.

2HP A/C is okay with the dimension given

You can also check our thread with the link below.


CABLES
https://www.nairaland.com/2326721/nigerchin-kabelmetal-coleman-cables/37


MEP INSTALLATION
https://www.nairaland.com/1233943/contact-us-electrical-mechanical-plumbing/40

MEP DESIGN
https://www.nairaland.com/1804476/complete-package-design-drawing-mechanical/11

DISTRIBUTION BOARD
SALES, INSTALLATION, TERMINATION AND CABLE MANAGEMENT
https://www.nairaland.com/2668061/abb-distribution-board-schneider-distribution/10

https://www.nairaland.com/6980507/distribution-boards-final-sub-circuit

Good evening sirs/ma, want to bring an update from the cable manufacturers to everyone.

Coleman and Nigerchin have finally increased their prices just within a month. Seriously the price of cables keep on increasing almost every month now. God will help us

Their reasons for price increase are :

Cost of gas
Cost of diesel
Labour cost
Cost of raw materials
Import duty
Bank interest rate.
Logistics
Etc ..

Obnoxious2001:
nice job you are doing sir,
am just curious, what is the depth of your earth pit?

The dimensions 1m x 1m x 1m the depth is 1m also

Phildecasa:
For now the form work has reach 90%, reinforcements 90%, plumbing work 100% and electrical works ongoing.

Good to see this

stuffs2002:
Pls can you explain to me what kind of lightening protectors and earthing system I should get because I intend to buy the items myself.

I have 24V system with several solar panels

I would understand because I am an electrical engineer

Pls go through our thread for more understanding

Check our thread for more information
https://www.nairaland.com/2316228/importance-proper-earthing-bonding-system/3

Sapiosexuality:
But assuming the house has a lightning protection is it still necessary to do one for the solar inverter?

The common Lightning arrestor covers about 25m radius only if the spike is original copper and not copper coated

But there is another one called indelec, This indelec can cover between 60m 100m radius


Check our thread for more information
https://www.nairaland.com/2316228/importance-proper-earthing-bonding-system/3

stuffs2002:
Good evening gurus in the house,


I had solar panels, inverter and batteries installed in my two houses by same installer but I noticed that there is no form of protection (Like Circuit breakers, lightening arrestors) in any of the two installations. I'm a bit worried and want to know what is to be done.

I am an Electrical Engineer and I expect to find some form of protection on the two systems.


Thanks as I await your inputs

You need lightning protection for the solar inverter and also a very good earthing syatem for the whole house

You can also check our thread with the link below.


CABLES
https://www.nairaland.com/2326721/nigerchin-kabelmetal-coleman-cables/37


MEP INSTALLATION
https://www.nairaland.com/1233943/contact-us-electrical-mechanical-plumbing/40

MEP DESIGN
https://www.nairaland.com/1804476/complete-package-design-drawing-mechanical/11

DISTRIBUTION BOARD
SALES, INSTALLATION
https://www.nairaland.com/2668061/abb-distribution-board-schneider-distribution/10

FINAL SUB-CIRCUIT TERMINATION AND CABLE MANAGEMENT
https://www.nairaland.com/6980507/distribution-boards-final-sub-circuit

Thanks to everyone

Nadingo:
E be like this cable price increase don turn to monthly affair. Smh

I don tire my brother

Good afternoon everyone, just to remind you that Nigerchin is increasing price of cables by Monday.

Below is the notice sent to all distributors

For more info
Call/WhatsApp. 08033643191

Nigerchin is increasing their price next week . Take tye advantage of this

Beframia:
I've been to a few houses where the V.T. is sited by the gate close to the security post. I think it's also an idea worth considering.

I don't support this idea having visitor's toilet at the gate house. The best is to have it close the Ante room or external terrace but MUST not be close to living room.

ehay:
I want to fix a sliding window in my house; but I am confused about using a sliding net or a permanent net. Pls if money is not an issue, which of them does a better job of protecting against insects.

Go permanent net and let it be install at the external part