₦airaland Forum

Thanks

atimadesign:
3d enterance perspectives ,A proposed Contemporary Gas-Station 2650sqM plot of land.
Our professional services is across the federation.
Call/WhatsAPP +2348036336212

Boss were you the one that design the northwest filling station at Gbagada after Anthony. Looks similar to that

PoloG:
Greetings y'all..

Please i would like to know how lucrative is a supermarket business ...

How much would it cost to setup a standard one

And what is the ROI monthly/yearly ...

Location is ibadan

Its a lucrative business . you can venture into it

Delivered to Mende Maryland

rafbas:
How can I get door card key control for hotel room

Like access control key for the hotel

bleexInc:
Hello everyone,
I want to get an inverter between 2.5 - 3.5kva.
Kindly recommend a very good one. Durability is the major consideration.
Thank you

Luminous inverter or Felicity

redgem:
The parlour is long (Parlour and dining together) as what the electrician said... So he had to put that much pop lights... Total pop lights in the house is 40... 8 wall brackets

You can use 3W as against 6W. Also wall light is becoming old except you have passion for it. People prefer ceiling fitting and the chandelier in the sitting room. You can as well compliment it with strip light ..

topsy23:
You are not in Lagos

Coming to Abuja is going to be too expensive.

Below is the report carried and the recommendation

Can not upload the file but can be forwarded to you on request

toyeoye:
This would be ideal...what was your recommendation? How much would a general testing/audit cost for a small 4 bedroom bungalow?

You are not in Lagos

Coming to Abuja is going to be too expensive.

Below is the report carried and the recommendation

toyeoye:
Definitely, thank you
Sending to your WhatsApp

It better to do general testing/power audit for the building.

The one we carried out in Nicon town last week. The complaints was that their prepaid main breaker always tripping whenever most of the equipment are powered on.

Our findings are:
-Load balancing is absent .
-Their earthing value is 26-ohm
-There are short circuiting between live and neutral of some outgoing breakers in the DB.
-The load cable from cut out to the low voltage panel doesn't pass the insulation resistance test
-Cable management in the DB is totally bad ..

We write a report with recommendation to the client

redgem:
Sir Twinskenny please what are the prices of cumester and naijachin wires? Which is best recommended?
2.5mm, 1.5mm and TV cable (a roll)... Electrician didn't add 4mm wires but I've seen posts listing 4mm (I want to know what 4mm wires are used for so I can insist he uses it...). And please, help review the quantity of wires...

4mm is for AC, water heater and cooker unit

Call us today

debeey87:
@topsy @twinskenny how much does single phase DB cost(range looking at different brands of products) and what brand will you recommend.

Also why are there long/short PVC pipes for 20mm/25mm for conduit wiring. I am not getting a suitable explanation from Google.

Thank you

We have different brand of Distribution Boards ABB, SCHNEIDER, LEGRAND, MEM, AB&T, A&T, HAVEL, HPL, HAGER.
Also, we have different of of ways of single phase
We have 4-way, 6-way, 8-way, 12-way. So you need specify number of ways

These arrangement is according to their quality LEGRAND, ABB, SCHNEIDER MEM(original), AB&T, HAGER, HPL, HAGER, HAVEL


20mm and 25mm pipes original is 2.9m long the short ones are not original dignity pipes So go for long one

BIGGIE121:
why thread no go dull, after Wetin everybody eye see for this buhari government.

Lolzz... God will help us

This thread is dull today ooo.. People are busy monitoring election results. May the best candidate win.

Rany4all:
Are you sure? Have you installed or done electrical connection for one before? Anyway, I think it's better to have the electrical piping in place just in case it's required. Thanks.

Power shower comes in different form.

The wall hung doesn't require power but the already made with cubicle needed becos it comes with a pump and the pump needed to be power for good pressure.

Rany4all:
Good morning my people. Please does anyone have any useful insight concerning the installation of these power showers (see image below)?

I understand they usually come with built-in water pumps to increase shower pressure, so I was wondering if they require both electrical and mechanical piping.

If you've installed them before, sell them, or have any idea about their installation, please kindly share your knowledge or post pictures of the piping or rear view of the showers. Thanks.

It require electrical connect for the shower to work effectively . And you need to connect to Solar or inverter so that you won't have low pressure when using

rotecch77:
Smart water closet with sensor

https://www.instagram.com/reel/Cn7Vpesp9xo/?igshid=MDJmNzVkMjY=

Nice one .. na money kill am.this is a new innovation, new technology

Call us for Original cables today

Call / Whatsapp 08033643191

You can also check our thread with the link below.


CABLES
https://www.nairaland.com/2326721/nigerchin-kabelmetal-coleman-cables/37


MEP INSTALLATION
https://www.nairaland.com/1233943/contact-us-electrical-mechanical-plumbing/40

MEP DESIGN
https://www.nairaland.com/1804476/complete-package-design-drawing-mechanical/11

DISTRIBUTION BOARD
SALES, INSTALLATION
https://www.nairaland.com/2668061/abb-distribution-board-schneider-distribution/10

FINAL SUB-CIRCUIT TERMINATION AND CABLE MANAGEMENT
https://www.nairaland.com/6980507/distribution-boards-final-sub-circuit

Call us today

Delivered yesterday, The client that prefer Nigerchin to Other brands of cable

Call/Whatsapp: 08033643191

Abolarin91:
Hi everyone, pls who knows where I can get this?

Car port ?

Contact this person +234 703 688 7546

Kunle

More pictures

New supply .. delivered today

You can as well check my WhatsApp status
WhatsApp. 08033643191

sonnie10:
Remember also that what they did those days was mostly surface wiring and not half conduit.
Secondly the wires were different. It had another thick insulation after the individual red and black insulation which served as the PVC pipe. Also the wires were not passed through ceiling, instead holes were drilled through walls.

The half conduit which you asked earlier is a totally new invention were single wires (red and black ) are passed through the ceiling without pvc. That is the one that makes me cringe.

Lastly, full conduit is a different ball game.

Cables used in those days have double insulation and not single core like what we used these days. He can do half conduit if he is ready to buy double insulation type and its more expensive than single cores .

Sir, Your materials delivered yesterday as promised to Owerri. Also, your contact has picked from ITC office too

Thanks

MrDraey:
Good afternoon,

Thanks for your response.

Please do you have a seller in Abuja you can recommend?

No sir but some people in Abuja normally buy from me

MrDraey:
Good afternoon house

Please how much is Coleman 1.5, 2.5 and 4mm cables now?

What are the better alternative and their prices please, an electrician suggested seebest but never heard of it

Go for Coleman,?Nigerchin/Kabelmetal/Purechem
1.5mm 13,500
2.5mm 22,400
4mm 36,000

henrymor:
I can't believe I am just seeing this. Thank you so much for your help. I appreciate boss. I have sorted it and everything is fine. God bless you.

You are welcome sir

debeey87:
@Topsy, @twinskenny, is it necessary to have 20mm pipes running through ceilings/woodwork or let me just ask, are there downsides to just running conduits in the walls only and running the wires naked in the ceiling

Not advisable sir. Do a full conduit system

Thanks.

These are the white colour

More pictures

@sonnie10:
Based on our discussion below are the grey colours of Legrand produc