₦airaland Forum

Itsrm:
The value should be less than 5v

Yes boss but the value he got is worrisome. It means the impedance value of the earthing is very high

Davidebun016:
Good evening house, recently i have been experiencing fluctuation in voltage supply and don't know what could have been the cause. My electrician got the value of 110V when he measured Voltage between neutral and earth. Does this value normal? Please help me out

The voltage reading between neutral and earth is too high. You need to check your earthing system very well . with this value you might be experiencing some electric shock when touching your fridge, your electric cooker. The value should be as low as 24V or less.

Also the fluctuation you are experiencing presently might be because of partial contact.. Pls check the following:

Neutral terminal in Electrical panel
Neutral terminal in your changeover switch
Neutral terminal in your Distribution boards
Neutral terminal in your cut-out fuse or gear switch

Also, you need to tell your electrician to check loop impedance value from your socket outlet

Thanks

suco01:
5pcs of earth rod?

I believe it's just for only lightning arrestor and not the entire house earthing ..

agbolahan1991:
About 7m would do

It will go far but won't finish it

Mophor:
Please I want to know how much that is been charged per sqm

I think it's around 450 - 650 depend on the location .. that 250k is a bit high

You can contact us for any our services. We are ready to give you the best of our installations

Our contacts are:
Whatsapp/Call 08033643191,
08051750560

You can also check our thread with the link below.


CABLES
https://www.nairaland.com/2326721/nigerchin-kabelmetal-coleman-cables/36


MEP INSTALLATION
https://www.nairaland.com/1233943/contact-us-electrical-mechanical-plumbing/40

MEP DESIGN
https://www.nairaland.com/1804476/complete-package-design-drawing-mechanical/10

DISTRIBUTION BOARD
SALES, INSTALLATION, TERMINATION AND CABLE MANAGEMENT
https://www.nairaland.com/2668061/abb-distribution-board-schneider-distribution/10

https://www.nairaland.com/6980507/distribution-boards-final-sub-circuit

Thanks for your patronage

More ....

Ibadan final sub circuit termination

Abbeyb1ack:
Area is well secure....naso I reach site see say all electrical wire Don miss for roof ...camouflage was left on the socket

Hmmm and pop have been completed

somehow:
If you get it wrong with the main contractor, you're in for a long ride.

Lolzzz...

Aventures:
In addition, in a process whereby clients wants to choose his sub contractors for stuff like POP, Electrical, Tiling, Smart home fittings, Aluminum should not be a problem to any contractor at all. But I will advice a synergy from planning stage. That is the client should choose his preferred sub contractors and carried them along from the beginning, review the plans together along with the designers and main contractors, draw out approved specifications for each trade and note all the sub contractors should be supervised by the main contractors at a reasonable fee. The reason behind this is to avoid blame shift, hinderances for effective execution of any aspect of sub contractors work, for example if you bring in a low voltage/smarthome contractor at a later time, executing his work may be difficult or in process he may damage some imbeeded conduits in the process of breaking wall. If such has been introduce from onset he would be invited for his input time to time to facilitate easy and perfect installation.

Main contractors should be the eye of client in this regards because the overall Glory still comes to him when the house is well and tastefully delivered.

That's why we have consultants, QS and project managership the representing the client in every aspect of project execution..What I normally do is to have submittals for all the equipment to be delivered and as well sample board..

All nominated sub contractors must be under the main contractors as you said for a standard practice... Client have the right to choose sub contractors and also consultants can also recommend for client too.

More picture from our project

Good morning sir

money121:
She's here on nairalander
All vendor watchout do your proper deligence before sealing deal with some of those in diapora, most of them are nothing but Apani lekun ja ye,Ripper,Scammer
Her full name is Omowunmi Allen Omotayo

A serial Fraudster On Nairaland

So sure you are seeing this if you refuse to pay back my 2m+ the remaining yr to used on earth you will not know peace Unless you pay back my Money

OLD FOOL

Maybe you need to go back to her site and see the level of work .. if you cause some nuisance to the people working there and people around there see embarrassment you are causing. She might be force to pay part of the money

Call us today

More pictures

redgem:
Om this issue of leaking roof...please what can I do to fix my leaking roof? They have already started pop work on it.. It's small holes in the roofing sheet about 3 places... My engineer found the holes and said he will fix it for over months now, now he told them to go ahead with pop work that he will fix it through manhole. If I can buy the material and find someone to fix it, I will be at rest... And a picture I got from the pop guys, I noticed that the gutter is pulling off, I guess by wind... What step should I take concerning the issues with the roof?

I don't know if flashband will work, normally it's a new roof and not suppose to mess it up with flashband. Need to be corrected as soon as possible since POP installations have commenced

Ibadan DB termination

Advocatesam:
Yes sir, we are now vulnerable to hunger but las las, the strike is ending

God will touch the heart of our government on this issue. Majority of us experience it during our undergraduate

Advocatesam:
I will continue to refer your company again again again and again because the client do not need to supervise your work before you do the right thing. Your sincerity is second to none. Continue to be a good man sir because you are one of the few Nigerians that could still be trusted sir. I am not hyping you but saying the obvious here

Thank you so much for the gift. 40k no be small money at this period FG dey owe me 8 months salary. God bless you so much sir

Lolzz are you a member of ASUU

Twostep:
Good morning house, please I need contacts to anyone that can do a Car port around Ikotun environs.

Will also like to have an idea how much the regular one costs as of now.. that is the 2005 design or so, thanks

Size is 4 by 8

Talk to this person +2347036887546 New Age

Came across one of the staff of this company and gave me the link to their products.

You can check their products with prices
Light fittings both indoor and outdoor
Smart switches
Socket


Below is the link

https://www.preciselighting.ng/products/40/wall-lights

I wish best on this project

You can contact us for any our services. We are ready to give you the best of our installations

Our contacts are:
Whatsapp/Call 08033643191,
08051750560

You can also check our thread with the link below.


CABLES
https://www.nairaland.com/2326721/nigerchin-kabelmetal-coleman-cables/36


MEP INSTALLATION
https://www.nairaland.com/1233943/contact-us-electrical-mechanical-plumbing/40

MEP DESIGN
https://www.nairaland.com/1804476/complete-package-design-drawing-mechanical/10

DISTRIBUTION BOARD
SALES, INSTALLATION, TERMINATION AND CABLE MANAGEMENT
https://www.nairaland.com/2668061/abb-distribution-board-schneider-distribution/10

https://www.nairaland.com/6980507/distribution-boards-final-sub-circuit

Ibadan Update Pictures

FEGEITOK:
Olumighty123 what are your thoughts on installing an industrial extractor fan to cover the whole house save for the kitchen and bathrooms which have their own extractor fans?

I am leaning towards that at the moment, currently researching it but I'd appreciate your comments.

What are you trying to extract out using industrial extractor fan. Not necessary if it is a residential building

The reason why industrial extractor fans are used in warehousing and factory is because of the heat generated

. more pics

Ayeopare82:
Good morning, please can I get the price for this quotation
Purechem 4mm 5packs
Purechem 2.5mm 7packs
Purechem 1.5mm 10 packs
Purechem 1mm 12 packs
Please original copper

e-mail: gbengababs07@gmail.com


Thanks

Good morning sir. Can you confirm if the mail delivered

coldcandy:
They said this is Lagos

Hmmm likely to be Lagos island.. my concern is if there is an issue with roof how are they going to climb it for maintenance

back2sender:
When Govt said integrity test will be carried on suspected buildings, How is the integrity test carried out? is it using hammer to strike the pillars? or what.

How is this carried out in simple layman terms

Thank you

There is an equipment for that .. that what they normally use when doing renovation and modification work

MsJanet123:
Hello Tope
Are u available for sanitary wares installation, external piping, soak away and water reservoir installation in 5-bedroom build ??

Yes we are available

Ayeopare82:
Good morning, please can I get the price for this quotation
Purechem 4mm 5packs
Purechem 2.5mm 7packs
Purechem 1.5mm 10 packs
Purechem 1mm 12 packs
Please original copper

e-mail: gbengababs07@gmail.com


Thanks

Mail sent sir