₦airaland Forum

Penuelseun:
no motor needed for that, just a small mechanical mechanism

Will still pull more load from the main rotor moving the whole thing. It will pull more power but not very significant.

redgem:
Yes, it took 2 weeks....

Ok. Thanks

redgem:
Finally got a confirmation email but haven't received a processing email yet... Will wait it out

Hi,
Have you gotten the panels? how long did it take you to get your panels?

Good day all please hownping does Fouani take to deliver in Lagos?

Horllar1990:
rainbow garden estate at imota.

Any landmark? I want to check it up on Google maps

motta:
very stable i have been using it for the past 6 months
i only scan 2 weeks ago when i heard dey have added more stations.
Formerly it was 300 + stations after scanning it became 400+ stations .

When I did mine it was 45k for total package

Interesting, please share Whatsapp contact let's chat.

odimbannamdi:
Lol...this Baba!

Twale baba . 😂

bitingcool:
pls share pictures of the fridge with me. I'm looking to buy a fridge and microwave

🤔

jonzingcaesar:
Fridge specs and pictures

👀?

motta:
why worry yourself go do free to air double dish with just a decoder you get over 400+ stations .

Are the stations stable or you have to keep scanning satellites now and again. What does it cost to set one up from scratch to finish?

odimbannamdi:
Just buy Starlink at currently promo price of 440k and sub 38k monthly. It gives more value for money

When big boys drop advice, everywhere is a shutdan!! 😊

Uniquewise:
Available for clearance.

Cooker
Fridge
Microwave oven
Blender
Plasma TV
1.5hp ACs (2)
Gas cylinder
Fan
Dining table
Rug
Inverter
Generators (2)
Orthopaedic mattress


Others
Plates
Dishes
Casserole dishes
Dinner sets
Tea set and mugs
Pyrex dishes
All in glass, ceramic, stainless-steel, etc
Etc...

Wholesale clearance/retail purchase
All brand new items

Surulere

08059054222

Inverter specs

EdenPower:
1) The original equipment manufacturer (OEM) recommended size will always be specified for each product. We will not recommend that size is exceeded.
2) Yes
3) It does blow well.

Noted. Thanks.

How did this end up, OP?

Horllar1990:
Two virgin plot of land for sale at ikorodu urgently by owner, you can refer and earn 5%
Going for 3.5m

Which area?

Mavor:
Abeg check the load again? Did you see AC or fridge? I need to engage an expert clearly.

Ok.
No vess.
An expert will engage you soon.

Olarewajub:
Hello house,

I just checked my two (2) tubular batteries, and the cell levels at battery A differ from those at battery B.

Is there any reason to be concerned? The levels in each battery are the same.

Your cell electrolyte gauge should be withing the allowable range, that's what matters.

Mavor:
Please read it again and comprehend. I take God beg you!

To power those loads for 16hrs during the day alone, you would need about 13kwh of stored battery energy.

1m doesn't even scratch the surface, for the stop gap you have in mind.

Adjust your load profile or expectations from what 800k can get for you, to avoid heartbreak.

Olarewajub:
Are you saying it's the same? Really concerned about my refrigerator.

I've given you a way to confirm if it's pure or not. Leave manual alone for now.

Olarewajub:
Thanks for the response.

I just checked the inverter manual.

The output waveform is listed as Sinewave. Is it the same as Pure Sinewave?

Even some that have "pure" in them are not really PSW inverters.

redgem:
Any jinko 475w?

No.

SULBELL:
CAn you ship to Kano?

Sure.

Olarewajub:
What's the DIY way to determine if my inverter is pure sine?

I recently experienced the same problem. I had to get a new refrigerator as the repairers in my location could not fix the problem even after getting a new compressor.

From my smart home apps, there is a slight variation in my wall sockets, around 1 voltage difference.

Connect a normal standing fan to the supply, listen closely while switching it on. If you hear a hum from the motor compartment, then it's most likely a modified square wave inverter.

adibo:
The inverter is a pure sine wave inverter. I will call a fridge repairer to look at it. Thanks for your reply, I appreciate

Ok.

Have 2 units of used Jinko panels for sale https://www.nairaland.com/7984413/original-used-new-solar-panels#129429273

Have 2 units of used Jinko panels for sale https://www.nairaland.com/7984413/original-used-new-solar-panels#129429273

ayinba1:
Thanks for your suggestions. The installer tightened something too hard and it broke was the information shared with me. I will try to get a clearer picture.

Not sure how to do the DM to see if you can help. Place is in Ojo local government area.

.whatsapp

mctfopt:
My freezer has been on programmable timer that turns on at 8:40am and turns off at 3:20pm for two years now. I doubt the issue with the fridge has anything to do with the timer.

From what you described, it appears the fridge may be experiencing a technical issue something to do with the power circuit in charge of powering up the compressor. The 800w you see is I think the fridge compressor's initial power draw when the compressor is about to kick on . I'm afraid you may need to invite a fridge repair person to take a look at the fridge (special attention to be paid to the compressor circuit control power board).

But before doing that, I'll recommend connecting a 60w or 100w incandescent bulb (old school yellow bulb) to the digital timer and set the timer to power on and off to see if anything happens to the bulb.

I just hope he didn't run a freezer with an MSW Inverter. Apparently the compressor coils are bad. Your suggestion of a professional fridge repairer is in order.

2 units of original tokunbo, Jinko panels 325w/320w available for sale

Both units are going for 150k!!

Both to be sold together please.

Can ship outside Lagos state.

ayinba1:
I called it cap, someone correctly identified it as battery terminal. Yes, my understanding is that it is broken. Because it is crusting around the edges and I attached a picture to the original post.

Someone suggested molding a new terminal. I am concerned that the problem could even affect the whole set up if I don’t fix it.

This contractor is missing out on a second project I need to complete for 4.5kVa and people will say their village people are after them.

Your picture is slightly blurry. A clearer one would have helped to properly diagnose the issue.

But my assumptions are these:
1. If it is forming some kind of salt like crystallization, then probably there was an acid spill, causing the bolt and nut to react. This is true also if the bolt and nut are rusting faster than normal.

Advice: shut down the system, disconnect the battery and rinse the battey terminal with clean water, and wipe dry with a towel. Allow the terminal to dry properly then apply generous amount of baby vaseline on the terminal to properly cover it to prevent further corrosion or reaction. Do this for the bolt and nut as well.
Cut and re-terminate the cable using a fresh, unused wire inside to connect with.
2. Confirm if the electrical contact at that point is firm, re-torque the connection to be sure.
3. Ensure the battery location is properly ventilated.

Caution: please make sure a qualified personnel handles this, else you risk chemical or electrical hazard to man or machine.

If you stay in Lagos, chat me let's see if we can work something out.

Cheers.

swagifted:
omo eh... Make we de watch how dem go take implement am...

😂

swagifted:
Slowly but surely...

Food don done for looters again... 😂