₦airaland Forum

amicdan:
Thanks boss. Had to edit my post for more clarity.

The issue I am having is that the battery drop from 5 bars ( Full charge ) to 3 bars after 2 minutes or less on any load no matter how small, then remains on on 3 bar for like 3 hours before I power down the setup.

sukkot:
Hehe na so I go see one forex guy . The guy was panicking and sweating bullets when I saw him 👀👀 . I say Ogbeni why you Dey panic like this na , the guy say dem Dey arrest BDC guys 🤣🤣🤣🤣 . The guy say the whole country done red finish say him no Dey even buy dollar again

jumper524:
The raid was not on bdc but on those Mallam engaged in an already outlawed activities.
BDC operators were only slammed with regulatory policy so as to tighten the loop holes they exploited.
The naira has been on steady gain ever since and today it's 1600.
I'm sure Peter obi was the same person who clearly stated you don't remove a teeth just like that because it aches you.

Corruption, underproduction are part of our problem, we aren't pleased with that but then we don't allow a new problem of negative speculation develope into a critical one because we are fighting a much bigger problem.
Problem in it's self is well managed at an initial stage.

amicdan:
Hi House.
My charge controller drops from 5 bar ( 13.6 volts ) to 3bar ( 12.4 volts ) after full charge on a load of 150 watts.
What could be the issue ? Setup was done a week ago.

Note had to charge with external intelligent 20amps charger to full bar.

This is my set up :

1. 2 x 335 watt GCL panel in series
2. 60 amp PWM Charge controller
3. 220amps Caesar tubular Battery
4. 1KVA MSW Inverter

easyyoke:
Will 25mm wire be able to enter those small small holes that most of these MPPT charge controllers come with. Cos 25mm is quite thick

GAZZUZZ:
Updating

icjunior:
I just installed 2*475w jinko panels and powmr 60a cc.

My tubular batteries are very low as they're showing 20v on the cc,but the issue I have now is I'm seeing the charging voltage from the cc,but not the wattage,I don't know if that makes any sense.

The inverter also isn't on atm because I intend to charge to 27v atleast before powering it on.

Could the inverter not being on be the reason why I can't see the wattage from the panels?

ti4c:
I'll like that, how much does it cost?

Will the one in the picture work?

Jameselias:
This market has caused me my business now suicide is the only thing crossing my mind

Please I don't know what else to do i sold my barbing business to focus on trading and now I'm fade up with life

Greenfaces:
Sure. I sell dspic30f2010 pure sine wave too

Greenfaces:
Ok.
The cost of living is so high. Even the 1000watts inverters they used to sell for 8k is now 18k. That's why I have started producing my own modified square wave inverters. I don't mind helping technicians do their own by manufacturing locally or in batch. This country ehn! Chai!

ti4c:
I'm looking to get a solar system on a budget because my aim is to have light to work on my laptop and fan throughout the day and last till at least 12 midnight.

I need advice on solar panels(I'm looking to get 2), price of battery that will last that long, inverter.

My budget is 250k. It's just to power my laptop for my work throughout the day.. no tv, fridge.

Thank you .

Obnoxious2001:
Who said so?

mvphenryeto5:
Bro are you saying that the 12v system is the reason his 2*220 ba3 runs down in 3 hrs?

luvlyoracle:
Small psw inverter needed for buying

princely009:
All 7 panels are connected in series.
The Inverter maximum input voltage (Voc) is 450v.

Trippledots:
Solar Panels with original capacity available

What is available now and today prices

Original capacity tokunbo panels
250w poly...56k
200w mono...56k
310w mono... 85k
460w mono....130k

Not Jinko panels but half cut modules:
550w mono (new without carton)...145k
550w Bi-facial (new without carton)... 150k

Additional stock:
Original capacity tokunbo panel
265w mono panel.... 76k

princely009:
Thanks for the response.
So best advise to prevent losses is to get a separate charge controller for both panels?
The total panels are 10. The owner initially installed 7 panels (PANEL 2), then he recently bought 3 panels (PANEL 1) to upgrade the installation from another source (Fouani).

mvphenryeto5:
Bro this number no Dy whatsapp

dollarnaira:
Chai
Business man

BlueStripper:
Thank you so much Sir. Since last week I made up my mind to upgrade to a 24v system.

If anyone has a 24v system for sale, 2.5 to 3.5kva, please let me know.

I beg, the inverter must have low power consumption. I don't want to add more troubles to my trouble.



Insha Allah, I am buying a bigger lithium pack from Valto. Since I tasted Lithium, I have had peace of mind.

I don't know which devil pushed me to buy this Tubular Batteries. I regret it Walahi.

BlueStripper:
Update Guys,

I have added the second 560 watts panel in series to the CC and removed the 180 watts Africell panels. So it's now 2pcs of 560amps half cut solar panels.

Please see my yield as at 10:35am.

I also attached an external battery meter (kindly ignore other readings on the screen). The battery meter and my voltmeter gives me 12.9 when Powmr CC shows 13.3

N/B my freezer is currently connected to the setup and running.

Hannaleeyah:
AI app? Something that's done manually. A.I can't do it perfectly as this, it has been tried several times. You can join the trial queue also. Or do I give you one to help repair with your so-called AI?

BlueStripper:
Good Morning Everyone,

My apologies for the confusion. I was so angry yesterday.

I have an independent lithium setup that's different from the lead acid setup. Each setup has its specific load assigned to it.

Like I said, I decommissioned the Fullriver batteries because they have served me for many years. I wanted a longer runtime so I switched to Tall Tubular Batteries.

My panels are 1pcs of 560 watts generic solar panel and 2 Pcs of 180 watts Africell solar panels connected in 2S1P array configuration.

For charging, sometimes I get over 900 watts of energy from the panel at full sunlight. And over 60amps from the CC to these batteries.

I believe I have answered all the questions asked.

Thank you so much

BlueStripper:
Good Evening Guys, I have a problem.

I recently got 2pcs of Quanta Amaron Tubular Batteries 220ah each (Brand New).

These batteries are always charged full before the evening by my 2s1p solar array setup 560amps (parrallel) and 180amps x2 (series) array.

The issue is, i get a very low runtime on just my freezer. My freezer consumes 150 watts of energy. I was using it perfectly with my Fullriver 150ah batteries (2pcs approximately 300ah) before decommissioning last week.

What could possible be the problem of these batteries? Its a 12v setup and I am supposed to enjoy more runtime but no, its been terrible. My Fullriver worked even better than this Quanta Amaron.

Should I upgrade to a 24v setup?

Charge controller is POWMR MPPT. Serving me for more than 3 years.

Please help @bassdow @valto @trippledots


N/B this is my first time using tall tubular batteries and i am so disappointed. The average Runtime with 150 watts fridge is 3hrs and battery will drop to 12.3volts.

My lithium setup 100ah carries same fridge for over 3hrs. This 440ah setup cant even carry for 3hrs and its almost at 50% DOD.

I am disappointed .

Joyprime:
What's your rating of the Altimate Batteries and Monopower inverter?

Are they reliable products?

Nlanalyst:
Scammers full Facebook marketplace but it's the best place to get these items considering how some greedy idiots have turned this group to another thing.

100k well spent.
Na 200k for Nairaland.

bharseeth:
Your contact? Preferably Whatsapp...

Joyprime:
My location we hardly see NEPA light. It's been months since the last time.

I need to power

140 watts Hisense deep freezer (1)

80 watts 50" LG smart TV (2)

80watts fan (2)

GoTV (2)

85 watts Sound Bar (1)

5 watts bulbs (6)

I can run the freezer 5 hours daily. It's enough to serve till next day.

I work from home so always at home.

An installer gave me a quotation of N1,342,000
All Felicity products

400w solar panel 2pieces 12500 each=250000
200ah battery 2pieces 260000 each=520000
Inverter 1.7kva=250000
Chargecontroller 30ah 28v =120000
And other installing accessories152000
Workman 50000
Total=1342000

Another installer 👇🏼

400watts mono-75k (foreign used)

200ah Altimate Batteries= 220k

Inverter 2.5kva 24v mopower = 280k

Charge controller 30A = 85k

Another installer asked me to use Foreign used panels and inverter with new lithium battery.

At this stage I'm confused, reasons I got here.

Been doing research online and found this thread.

Pls I need guide from gurus in the house so I don't make a mistake.

I'm ready to do the installation this week if I'm convinced on the best solution.

Resident in Uyo Akwa Ibom State

NiyiOmoIyunade:
The online voltage drop calculators say that you are fine.

If your transmission distance increased more than 6m one way, the answer could change quickly.